Estimated Distance given Discharge in Tracer Method Solution

STEP 0: Pre-Calculation Summary
Formula Used
Estimated Distance = 50*sqrt(Discharge)
L = 50*sqrt(Q)
This formula uses 1 Functions, 2 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Estimated Distance - (Measured in Meter) - Estimated Distance is the total movement of river flow without regard to direction. It represents how much ground river flow has covered during its motion.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the volumetric flow rate of a stream or river. It quantifies the amount of water flowing through a specific cross-sectional area over a given time period.
STEP 1: Convert Input(s) to Base Unit
Discharge: 1.1 Cubic Meter per Second --> 1.1 Cubic Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
L = 50*sqrt(Q) --> 50*sqrt(1.1)
Evaluating ... ...
L = 52.4404424085076
STEP 3: Convert Result to Output's Unit
52.4404424085076 Meter --> No Conversion Required
FINAL ANSWER
52.4404424085076 52.44044 Meter <-- Estimated Distance
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Himanshi Sharma
Bhilai Institute of Technology (BIT), Raipur
Himanshi Sharma has verified this Calculator and 800+ more calculators!

Tracer Method (Instantaneous Injection) Calculators

Water Table Depth given Distance in Tracer Method
​ LaTeX ​ Go Water Depth as Indicated by the Scale = (100*Channel Width^2)/Estimated Distance
Estimated Distance given Channel Width
​ LaTeX ​ Go Estimated Distance = (100*Channel Width^2)/Water Depth as Indicated by the Scale
Estimated Distance given Discharge in Tracer Method
​ LaTeX ​ Go Estimated Distance = 50*sqrt(Discharge)

Estimated Distance given Discharge in Tracer Method Formula

​LaTeX ​Go
Estimated Distance = 50*sqrt(Discharge)
L = 50*sqrt(Q)

What is Tracer Method?

The tracer method is a dilution method of determining the flow rate in a ground or surface water environment where a hydraulic structure (flume/weir) cannot be installed either due to cost, monitoring duration, or ecological reasons.

What are the advantages and limitations of using the Tracer Method?

The tracer method provides accurate and reliable data on water movement and can be used to identify and track contaminants in the water system.
The tracer method can be expensive and time-consuming, and there may be limitations to the types of tracers that can be used in different environments.

How to Calculate Estimated Distance given Discharge in Tracer Method?

Estimated Distance given Discharge in Tracer Method calculator uses Estimated Distance = 50*sqrt(Discharge) to calculate the Estimated Distance, The Estimated Distance given Discharge in Tracer Method formula is defined as the distance necessary for a tracer (such as a dye or other substance) to become well-mixed along a river or channel given discharge while selecting a location along the river with enough turbulence so that the tracer gets well mixed. Estimated Distance is denoted by L symbol.

How to calculate Estimated Distance given Discharge in Tracer Method using this online calculator? To use this online calculator for Estimated Distance given Discharge in Tracer Method, enter Discharge (Q) and hit the calculate button. Here is how the Estimated Distance given Discharge in Tracer Method calculation can be explained with given input values -> 52.44044 = 50*sqrt(1.1).

FAQ

What is Estimated Distance given Discharge in Tracer Method?
The Estimated Distance given Discharge in Tracer Method formula is defined as the distance necessary for a tracer (such as a dye or other substance) to become well-mixed along a river or channel given discharge while selecting a location along the river with enough turbulence so that the tracer gets well mixed and is represented as L = 50*sqrt(Q) or Estimated Distance = 50*sqrt(Discharge). Discharge is the volumetric flow rate of a stream or river. It quantifies the amount of water flowing through a specific cross-sectional area over a given time period.
How to calculate Estimated Distance given Discharge in Tracer Method?
The Estimated Distance given Discharge in Tracer Method formula is defined as the distance necessary for a tracer (such as a dye or other substance) to become well-mixed along a river or channel given discharge while selecting a location along the river with enough turbulence so that the tracer gets well mixed is calculated using Estimated Distance = 50*sqrt(Discharge). To calculate Estimated Distance given Discharge in Tracer Method, you need Discharge (Q). With our tool, you need to enter the respective value for Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Estimated Distance?
In this formula, Estimated Distance uses Discharge. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Estimated Distance = (100*Channel Width^2)/Water Depth as Indicated by the Scale
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!