Detention Time with respect to Discharge Rate Solution

STEP 0: Pre-Calculation Summary
Formula Used
Detention Time = Length*Width*Height of Crack/Discharge
Td = L*w*h/Q
This formula uses 5 Variables
Variables Used
Detention Time - (Measured in Second) - The Detention Time refers to the amount of time that a fluid (or any substance) spends within a particular component of a system.
Length - (Measured in Meter) - The Length refers to the measurement of the distance between two points.
Width - (Measured in Meter) - The Width of a sedimentation tank refers to the horizontal dimension across the tank, typically measured perpendicular to the flow of water in a rectangular tank.
Height of Crack - (Measured in Meter) - The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress.
Discharge - (Measured in Cubic Meter per Second) - The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.
STEP 1: Convert Input(s) to Base Unit
Length: 5 Meter --> 5 Meter No Conversion Required
Width: 2.29 Meter --> 2.29 Meter No Conversion Required
Height of Crack: 12000 Millimeter --> 12 Meter (Check conversion ​here)
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Td = L*w*h/Q --> 5*2.29*12/1.01
Evaluating ... ...
Td = 136.039603960396
STEP 3: Convert Result to Output's Unit
136.039603960396 Second -->2.26732673267327 Minute (Check conversion ​here)
FINAL ANSWER
2.26732673267327 2.267327 Minute <-- Detention Time
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has verified this Calculator and 500+ more calculators!

Detention Time Calculators

Detention Time with respect to Discharge Rate
​ LaTeX ​ Go Detention Time = Length*Width*Height of Crack/Discharge
Detention Time given Displacement Efficiency of Sedimentation Tank
​ LaTeX ​ Go Detention Time = Flowing through Period/Displacement Efficiency
Detention Period given Falling Speed of Smaller Particle
​ LaTeX ​ Go Detention Time = Outer Height/Falling Speed
Detention Time in Sedimentation Tank
​ LaTeX ​ Go Detention Time = Volume/Discharge

Detention Time with respect to Discharge Rate Formula

​LaTeX ​Go
Detention Time = Length*Width*Height of Crack/Discharge
Td = L*w*h/Q

What is Discharge Rate?

Discharge Rate refers to the volume of fluid that flows out of a system, such as a pipe, channel, reservoir, or treatment facility, over a specific period of time.

How to Calculate Detention Time with respect to Discharge Rate?

Detention Time with respect to Discharge Rate calculator uses Detention Time = Length*Width*Height of Crack/Discharge to calculate the Detention Time, The Detention Time with respect to Discharge Rate formula is defined as the time required for a given amount of water or wastewater to pass through a tank at a given rate of flow. Detention Time is denoted by Td symbol.

How to calculate Detention Time with respect to Discharge Rate using this online calculator? To use this online calculator for Detention Time with respect to Discharge Rate, enter Length (L), Width (w), Height of Crack (h) & Discharge (Q) and hit the calculate button. Here is how the Detention Time with respect to Discharge Rate calculation can be explained with given input values -> 0.037789 = 5*2.29*12/1.01.

FAQ

What is Detention Time with respect to Discharge Rate?
The Detention Time with respect to Discharge Rate formula is defined as the time required for a given amount of water or wastewater to pass through a tank at a given rate of flow and is represented as Td = L*w*h/Q or Detention Time = Length*Width*Height of Crack/Discharge. The Length refers to the measurement of the distance between two points, The Width of a sedimentation tank refers to the horizontal dimension across the tank, typically measured perpendicular to the flow of water in a rectangular tank, The Height of Crack refers to the size of a flaw or crack in a material that can lead to catastrophic failure under a given stress & The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.
How to calculate Detention Time with respect to Discharge Rate?
The Detention Time with respect to Discharge Rate formula is defined as the time required for a given amount of water or wastewater to pass through a tank at a given rate of flow is calculated using Detention Time = Length*Width*Height of Crack/Discharge. To calculate Detention Time with respect to Discharge Rate, you need Length (L), Width (w), Height of Crack (h) & Discharge (Q). With our tool, you need to enter the respective value for Length, Width, Height of Crack & Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Detention Time?
In this formula, Detention Time uses Length, Width, Height of Crack & Discharge. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Detention Time = Outer Height/Falling Speed
  • Detention Time = Volume/Discharge
  • Detention Time = Flowing through Period/Displacement Efficiency
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!