Depth of Water in Well given Drawdown Value measured at Well Calculator

✖Thickness of Unconfined Aquifer is measured from impermeable layer to the initial level of water table.ⓘ Thickness of Unconfined Aquifer [H]			+10% -10%
✖The Total Drawdown is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.ⓘ Total Drawdown [s_t]			+10% -10%

✖Depth of Water in Well given Drawdown is the depth or water level inside a well that can sustain a specific drawdown.ⓘ Depth of Water in Well given Drawdown Value measured at Well [h_d']

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unconfined Aquifer Formulas PDF PDF Image

Depth of Water in Well given Drawdown Value measured at Well Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Water in Well given Drawdown = Thickness of Unconfined Aquifer-Total Drawdown
h_d' = H-s_t
This formula uses 3 Variables

Variables Used

Depth of Water in Well given Drawdown - (Measured in Meter) - Depth of Water in Well given Drawdown is the depth or water level inside a well that can sustain a specific drawdown.
Thickness of Unconfined Aquifer - (Measured in Meter) - Thickness of Unconfined Aquifer is measured from impermeable layer to the initial level of water table.
Total Drawdown - (Measured in Meter) - The Total Drawdown is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.

STEP 1: Convert Input(s) to Base Unit

Thickness of Unconfined Aquifer: 5 Meter --> 5 Meter No Conversion Required
Total Drawdown: 0.83 Meter --> 0.83 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_d' = H-s_t --> 5-0.83

Evaluating ... ...

h_d' = 4.17

STEP 3: Convert Result to Output's Unit

4.17 Meter --> No Conversion Required

FINAL ANSWER

4.17 Meter <-- Depth of Water in Well given Drawdown

(Calculation completed in 00.018 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Well Hydraulics » Unconfined Aquifer » Depth of Water in Well » Depth of Water in Well given Drawdown Value measured at Well

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Depth of Water in Well Calculators

Depth of Water at Point 1 given Discharge of Two Wells under Consideration

LaTeX Go Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),e))/(pi*Coefficient of Permeability in Well Hydraulics))

Depth of Water at Point 2 given Discharge of Two Wells under Consideration

LaTeX Go Depth of Water 2 = sqrt(Depth of Water 1^2+(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),e))/(pi*Coefficient of Permeability in Well Hydraulics))

Depth of Water in Well given Discharge in Unconfined Aquifer

LaTeX Go Depth of Water in Well given Discharge = sqrt(Thickness of Unconfined Aquifer^2-(Discharge*log((Radius of Influence/Radius of Well),e))/(pi*Coefficient of Permeability in Well Hydraulics))

Depth of Water at Point 1 given Discharge from Two Wells with Base 10

LaTeX Go Depth of Water 1 = sqrt(Depth of Water 2^2-(Discharge*log((Radial Distance at Observation Well 2/Radial Distance at Observation Well 1),10))/(1.36*Coefficient of Permeability in Well Hydraulics))

Depth of Water in Well given Drawdown Value measured at Well Formula

LaTeX Go

Depth of Water in Well given Drawdown = Thickness of Unconfined Aquifer-Total Drawdown
h_d' = H-s_t

What is Drawdown?

A drawdown is a peak-to-trough decline during a specific period for an investment, trading account, or fund. A drawdown is usually quoted as the percentage between the peak and the subsequent trough.

How to Calculate Depth of Water in Well given Drawdown Value measured at Well?

Depth of Water in Well given Drawdown Value measured at Well calculator uses Depth of Water in Well given Drawdown = Thickness of Unconfined Aquifer-Total Drawdown to calculate the Depth of Water in Well given Drawdown, The Depth of Water in Well given Drawdown Value measured at Well formula is defined as the calculation of the value of depth of water in well when we have prior information of drawdown value measured at well. Depth of Water in Well given Drawdown is denoted by h_d' symbol.

How to calculate Depth of Water in Well given Drawdown Value measured at Well using this online calculator? To use this online calculator for Depth of Water in Well given Drawdown Value measured at Well, enter Thickness of Unconfined Aquifer (H) & Total Drawdown (s_t) and hit the calculate button. Here is how the Depth of Water in Well given Drawdown Value measured at Well calculation can be explained with given input values -> 4.17 = 5-0.83.

FAQ

What is Depth of Water in Well given Drawdown Value measured at Well?

The Depth of Water in Well given Drawdown Value measured at Well formula is defined as the calculation of the value of depth of water in well when we have prior information of drawdown value measured at well and is represented as h_d' = H-s_t or Depth of Water in Well given Drawdown = Thickness of Unconfined Aquifer-Total Drawdown. Thickness of Unconfined Aquifer is measured from impermeable layer to the initial level of water table & The Total Drawdown is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.

How to calculate Depth of Water in Well given Drawdown Value measured at Well?

The Depth of Water in Well given Drawdown Value measured at Well formula is defined as the calculation of the value of depth of water in well when we have prior information of drawdown value measured at well is calculated using Depth of Water in Well given Drawdown = Thickness of Unconfined Aquifer-Total Drawdown. To calculate Depth of Water in Well given Drawdown Value measured at Well, you need Thickness of Unconfined Aquifer (H) & Total Drawdown (s_t). With our tool, you need to enter the respective value for Thickness of Unconfined Aquifer & Total Drawdown and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search