Depth of Beam - (Measured in Meter) - Depth of Beam is the overall depth of the cross-section of the beam perpendicular to the axis of the beam.
Length of Span - (Measured in Meter) - Length of Span refers to the length of the opening above which the beam is spanning.

STEP 1: Convert Input(s) to Base Unit

Length of Span: 10.01 Meter --> 10.01 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D_B = I_n/25 --> 10.01/25

Evaluating ... ...

D_B = 0.4004

STEP 3: Convert Result to Output's Unit

0.4004 Meter --> No Conversion Required

FINAL ANSWER

0.4004 Meter <-- Depth of Beam

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Structural Engineering » Concrete Structures » Behaviour in Flexure » Analysis Using Working Stress Method » Singly Reinforced Sections » Singly Reinforced Rectangular Sections » Depth of Roof and Floor Slabs

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Rudrani Tidke

Cummins College of Engineering for Women (CCEW), Pune

Rudrani Tidke has verified this Calculator and 50+ more calculators!

< Singly Reinforced Rectangular Sections Calculators

Stress in Steel given Cross-Sectional Reinforcing Tensile Area to Beam Area Ratio

LaTeX Go Stress in Compressive Steel = Bending Moment/(Modular Ratio for Elastic Shortening*Constant j*Width of Beam*Depth of Beam^2)

Stress in Concrete

LaTeX Go Stress in Concrete = 2*Bending Moment/(Constant k*Constant j*Width of Beam*Depth of Beam^2)

Stress in Steel

LaTeX Go Stress in Compressive Steel = Moment in Structures/(Area of Tension Reinforcement*Constant j*Depth of Beam)

Bending Moment given Stress in Concrete

LaTeX Go Bending Moment = (Stress in Concrete*Constant k*Width of Beam*Depth of Beam^2)/2

Depth of Roof and Floor Slabs Formula

LaTeX Go

Depth of Beam = Length of Span/25
D_B = I_n/25

Define Slabs?

A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete. Steel-reinforced slabs, typically between 100 and 500 mm thick, are most often used to construct floors and ceilings, while thinner mud slabs may be used for exterior paving.

How to Calculate Depth of Roof and Floor Slabs?

Depth of Roof and Floor Slabs calculator uses Depth of Beam = Length of Span/25 to calculate the Depth of Beam, The Depth of Roof and Floor Slabs formula is defined as the distance from the top or surface to the bottom of roof or floor slabs. Depth of Beam is denoted by D_B symbol.

How to calculate Depth of Roof and Floor Slabs using this online calculator? To use this online calculator for Depth of Roof and Floor Slabs, enter Length of Span (I_n) and hit the calculate button. Here is how the Depth of Roof and Floor Slabs calculation can be explained with given input values -> 0.4004 = 10.01/25.

FAQ

What is Depth of Roof and Floor Slabs?

The Depth of Roof and Floor Slabs formula is defined as the distance from the top or surface to the bottom of roof or floor slabs and is represented as D_B = I_n/25 or Depth of Beam = Length of Span/25. Length of Span refers to the length of the opening above which the beam is spanning.

How to calculate Depth of Roof and Floor Slabs?

The Depth of Roof and Floor Slabs formula is defined as the distance from the top or surface to the bottom of roof or floor slabs is calculated using Depth of Beam = Length of Span/25. To calculate Depth of Roof and Floor Slabs, you need Length of Span (I_n). With our tool, you need to enter the respective value for Length of Span and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Depth of Beam?

In this formula, Depth of Beam uses Length of Span. We can use 2 other way(s) to calculate the same, which is/are as follows -

Depth of Beam = Length of Span/15
Depth of Beam = (Length of Span/12)+(Length of Span/10)

Home

FREE PDFs

🔍 Search