Depth of lever arm given width Calculator

✖Width of Lever Arm is the thickness or the width of the lever arm measured perpendicular to the applied force on respective arms.ⓘ Width of Lever Arm [b_l]

+10%

-10%

✖Depth of Lever Arm is the thickness of the lever arm measured parallel to the applied force on respective arms.ⓘ Depth of lever arm given width [d]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Mechanical Formula PDF PDF Image

Depth of lever arm given width Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Lever Arm = 2*Width of Lever Arm
d = 2*b_l
This formula uses 2 Variables

Variables Used

Depth of Lever Arm - (Measured in Meter) - Depth of Lever Arm is the thickness of the lever arm measured parallel to the applied force on respective arms.
Width of Lever Arm - (Measured in Meter) - Width of Lever Arm is the thickness or the width of the lever arm measured perpendicular to the applied force on respective arms.

STEP 1: Convert Input(s) to Base Unit

Width of Lever Arm: 14.2 Millimeter --> 0.0142 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = 2*b_l --> 2*0.0142

Evaluating ... ...

d = 0.0284

STEP 3: Convert Result to Output's Unit

0.0284 Meter -->28.4 Millimeter (Check conversion here)

FINAL ANSWER

28.4 Millimeter <-- Depth of Lever Arm

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Lever » Lever Arm » Depth of lever arm given width

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Lever Arm Calculators

Angle between arms of lever given effort, load and net reaction at fulcrum

LaTeX Go Angle Between Lever Arms = arccos(((Load on lever^2)+(Effort on Lever^2)-(Net Force at Lever Fulcrum Pin^2))/(2*Load on lever*Effort on Lever))

Length of major axis for elliptical cross sectioned lever given minor axis

LaTeX Go Major Axis of Lever Ellipse Section = 2*Minor Axis of Lever Ellipse Section

Depth of lever arm given width

LaTeX Go Depth of Lever Arm = 2*Width of Lever Arm

Width of lever arm given depth

LaTeX Go Width of Lever Arm = Depth of Lever Arm/2

Depth of lever arm given width Formula

LaTeX Go

Depth of Lever Arm = 2*Width of Lever Arm
d = 2*b_l

What is hydraulic leverage?

Just as we experience a tradeoff of force vs. distance in mechanical leverage, so too with hydraulic leverage. A small force on a small piston can balance a higher force on a larger piston; however, though force is multiplied, distance (speed) is sacrificed.

How to Calculate Depth of lever arm given width?

Depth of lever arm given width calculator uses Depth of Lever Arm = 2*Width of Lever Arm to calculate the Depth of Lever Arm, The Depth of lever arm given width is the thickness of the lever arm measured parallel to the applied force on the respective arms. Depth of Lever Arm is denoted by d symbol.

How to calculate Depth of lever arm given width using this online calculator? To use this online calculator for Depth of lever arm given width, enter Width of Lever Arm (b_l) and hit the calculate button. Here is how the Depth of lever arm given width calculation can be explained with given input values -> 28400 = 2*0.0142.

FAQ

What is Depth of lever arm given width?

The Depth of lever arm given width is the thickness of the lever arm measured parallel to the applied force on the respective arms and is represented as d = 2*b_l or Depth of Lever Arm = 2*Width of Lever Arm. Width of Lever Arm is the thickness or the width of the lever arm measured perpendicular to the applied force on respective arms.

How to calculate Depth of lever arm given width?

The Depth of lever arm given width is the thickness of the lever arm measured parallel to the applied force on the respective arms is calculated using Depth of Lever Arm = 2*Width of Lever Arm. To calculate Depth of lever arm given width, you need Width of Lever Arm (b_l). With our tool, you need to enter the respective value for Width of Lever Arm and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search