Depth of Last V-groove for Minimum Distortion of Butt Joint Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth of The Last V Groove = (0.38*Depth of The First V Groove-0.12*Depth of Root Face)/0.62
t2 = (0.38*t1-0.12*t3)/0.62
This formula uses 3 Variables
Variables Used
Depth of The Last V Groove - (Measured in Meter) - Depth of The Last V Groove is the distance from the bottom of the plate to root face.
Depth of The First V Groove - (Measured in Meter) - Depth of The First V Groove is the depth from surface of plate to the root face.
Depth of Root Face - (Measured in Meter) - Depth of root face is the thickness of that portion of plate which contains root face.
STEP 1: Convert Input(s) to Base Unit
Depth of The First V Groove: 6.29 Millimeter --> 0.00629 Meter (Check conversion ​here)
Depth of Root Face: 6.5 Millimeter --> 0.0065 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
t2 = (0.38*t1-0.12*t3)/0.62 --> (0.38*0.00629-0.12*0.0065)/0.62
Evaluating ... ...
t2 = 0.00259709677419355
STEP 3: Convert Result to Output's Unit
0.00259709677419355 Meter -->2.59709677419355 Millimeter (Check conversion ​here)
FINAL ANSWER
2.59709677419355 2.597097 Millimeter <-- Depth of The Last V Groove
(Calculation completed in 00.008 seconds)

Credits

Creator Image
Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verifier Image
Verified by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has verified this Calculator and 400+ more calculators!

Butt Joints Calculators

Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint
​ LaTeX ​ Go Total Transverse Shrinkage = Transverse Shrinkage in First Pass+Constant For Multi Pass Shrinkage*(log10(Total Weight of Weld Metal Deposited/Weld Metal Deposited in First Pass))
Plate Thickness for given Transverse Shrinkage in Butt Joints
​ LaTeX ​ Go Plate Thickness in Butt Joint = (5.08*Cross Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening))
Transverse Shrinkage in Butt Joints
​ LaTeX ​ Go Transverse Shrinkage of Butt Joint = (5.08*(Cross Sectional Area of Weld/Plate Thickness in Butt Joint))+(1.27*Root Opening)
Cross-sectional area of weld for given transverse shrinkage in butt joints
​ LaTeX ​ Go Cross Sectional Area of Weld = (Plate Thickness in Butt Joint*(Transverse Shrinkage of Butt Joint-1.27*Root Opening))/5.08

Depth of Last V-groove for Minimum Distortion of Butt Joint Formula

​LaTeX ​Go
Depth of The Last V Groove = (0.38*Depth of The First V Groove-0.12*Depth of Root Face)/0.62
t2 = (0.38*t1-0.12*t3)/0.62

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Depth of Last V-groove for Minimum Distortion of Butt Joint?

Depth of Last V-groove for Minimum Distortion of Butt Joint calculator uses Depth of The Last V Groove = (0.38*Depth of The First V Groove-0.12*Depth of Root Face)/0.62 to calculate the Depth of The Last V Groove, The Depth of Last V-groove for Minimum Distortion of Butt Joint is the thickness of that portion of plate which contains the bottom groove face. Depth of The Last V Groove is denoted by t2 symbol.

How to calculate Depth of Last V-groove for Minimum Distortion of Butt Joint using this online calculator? To use this online calculator for Depth of Last V-groove for Minimum Distortion of Butt Joint, enter Depth of The First V Groove (t1) & Depth of Root Face (t3) and hit the calculate button. Here is how the Depth of Last V-groove for Minimum Distortion of Butt Joint calculation can be explained with given input values -> 2597.097 = (0.38*0.00629-0.12*0.0065)/0.62.

FAQ

What is Depth of Last V-groove for Minimum Distortion of Butt Joint?
The Depth of Last V-groove for Minimum Distortion of Butt Joint is the thickness of that portion of plate which contains the bottom groove face and is represented as t2 = (0.38*t1-0.12*t3)/0.62 or Depth of The Last V Groove = (0.38*Depth of The First V Groove-0.12*Depth of Root Face)/0.62. Depth of The First V Groove is the depth from surface of plate to the root face & Depth of root face is the thickness of that portion of plate which contains root face.
How to calculate Depth of Last V-groove for Minimum Distortion of Butt Joint?
The Depth of Last V-groove for Minimum Distortion of Butt Joint is the thickness of that portion of plate which contains the bottom groove face is calculated using Depth of The Last V Groove = (0.38*Depth of The First V Groove-0.12*Depth of Root Face)/0.62. To calculate Depth of Last V-groove for Minimum Distortion of Butt Joint, you need Depth of The First V Groove (t1) & Depth of Root Face (t3). With our tool, you need to enter the respective value for Depth of The First V Groove & Depth of Root Face and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!