Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in Solution

STEP 0: Pre-Calculation Summary
Formula Used
Depth = ((Inlet Capacity/(0.6*Area of Opening))^2)*(1/(2*Acceleration due to Gravity))
D = ((Qi/(0.6*Ao))^2)*(1/(2*g))
This formula uses 4 Variables
Variables Used
Depth - (Measured in Meter) - The Depth refers to the vertical distance from a reference point to the bottom of a body of water or to a specific depth below the water surface.
Inlet Capacity - (Measured in Cubic Meter per Second) - The Inlet Capacity refers to the maximum rate at which a storm water inlet or drainage structure can accept and convey water without causing flooding or other adverse impacts.
Area of Opening - (Measured in Square Meter) - The Area of Opening refers to the physical space in a structure or barrier through which air, water, or other substances can pass.
Acceleration due to Gravity - (Measured in Meter per Square Second) - Acceleration due to Gravity is acceleration gained by an object because of gravitational force.
STEP 1: Convert Input(s) to Base Unit
Inlet Capacity: 42 Cubic Meter per Second --> 42 Cubic Meter per Second No Conversion Required
Area of Opening: 9.128 Square Meter --> 9.128 Square Meter No Conversion Required
Acceleration due to Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
D = ((Qi/(0.6*Ao))^2)*(1/(2*g)) --> ((42/(0.6*9.128))^2)*(1/(2*9.8))
Evaluating ... ...
D = 3.00046624845128
STEP 3: Convert Result to Output's Unit
3.00046624845128 Meter --> No Conversion Required
FINAL ANSWER
3.00046624845128 3.000466 Meter <-- Depth
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Chandana P Dev
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1700+ more calculators!

Disposing of Storm Water Calculators

Depression in Curb Inlet given Runoff Quantity with Full Gutter flow
​ LaTeX ​ Go Depression in Curb Inlet = ((Runoff Quantity/(0.7*Length of Opening))^(2/3))-Depth of Flow at Inlet
Depth of Flow at Inlet given Runoff Quantity with Full Gutter Flow
​ LaTeX ​ Go Depth of Flow at Inlet = ((Runoff Quantity/(0.7*Length of Opening))^(2/3))-Depression in Curb Inlet
Length of Opening given Runoff Quantity with Full Gutter Flow
​ LaTeX ​ Go Length of Opening = Runoff Quantity/(0.7*(Depression in Curb Inlet+Depth of Flow at Inlet)^(3/2))
Runoff Quantity with Full Gutter Flow
​ LaTeX ​ Go Runoff Quantity = 0.7*Length of Opening*(Depression in Curb Inlet+Depth of Flow at Inlet)^(3/2)

Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in Formula

​LaTeX ​Go
Depth = ((Inlet Capacity/(0.6*Area of Opening))^2)*(1/(2*Acceleration due to Gravity))
D = ((Qi/(0.6*Ao))^2)*(1/(2*g))

What is Inlet Capacity?

Inlet capacity measures the flow in sewer pipes in terms of cubic meters of flow per day. Usually, all the fluids happen to flow inside the pipe under pressure force, and only water flows in a channel under gravity.

How to Calculate Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in?

Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in calculator uses Depth = ((Inlet Capacity/(0.6*Area of Opening))^2)*(1/(2*Acceleration due to Gravity)) to calculate the Depth, The Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in is defined as the depth of flow in channel or culvert when slope of water surface and channel bottom is same and water depth remains constant. Depth is denoted by D symbol.

How to calculate Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in using this online calculator? To use this online calculator for Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in, enter Inlet Capacity (Qi), Area of Opening (Ao) & Acceleration due to Gravity (g) and hit the calculate button. Here is how the Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in calculation can be explained with given input values -> 3.000466 = ((42/(0.6*9.128))^2)*(1/(2*9.8)).

FAQ

What is Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in?
The Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in is defined as the depth of flow in channel or culvert when slope of water surface and channel bottom is same and water depth remains constant and is represented as D = ((Qi/(0.6*Ao))^2)*(1/(2*g)) or Depth = ((Inlet Capacity/(0.6*Area of Opening))^2)*(1/(2*Acceleration due to Gravity)). The Inlet Capacity refers to the maximum rate at which a storm water inlet or drainage structure can accept and convey water without causing flooding or other adverse impacts, The Area of Opening refers to the physical space in a structure or barrier through which air, water, or other substances can pass & Acceleration due to Gravity is acceleration gained by an object because of gravitational force.
How to calculate Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in?
The Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in is defined as the depth of flow in channel or culvert when slope of water surface and channel bottom is same and water depth remains constant is calculated using Depth = ((Inlet Capacity/(0.6*Area of Opening))^2)*(1/(2*Acceleration due to Gravity)). To calculate Depth of Flow given Inlet Capacity for Flow Depth more than 1ft 5in, you need Inlet Capacity (Qi), Area of Opening (Ao) & Acceleration due to Gravity (g). With our tool, you need to enter the respective value for Inlet Capacity, Area of Opening & Acceleration due to Gravity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!