HCF calculator

Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Environmental Engineering Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Water Resources Ground Water Conveyance of Water Design of a Chlorination System for Wastewater Disinfection Design of a Circular Settling Tank More >>

⤿

Yield of an Open Well Basic Definitions Characteristic Well Losses Confined Aquifers More >>

⤿

Recuperation Test Constant Level Pumping Test

⤿

Depression Head when Pumping Stopped Constant Depending upon Base Soil Cross Sectional Area of Well Depression Head after Pumping Stopped More >>

✖Depression Head in Well 2 is depression head in the well at a time T after the pumping stopped.ⓘ Depression Head in Well 2 [h_w2]			+10% -10%
✖Time Interval is the amount of time required for the total change in concentration.ⓘ Time Interval [Δ_t]			+10% -10%

✖Depression Head is the difference of level of waters table and the water level in the well when pumping stopped.ⓘ Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present [h_d]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Recuperation Test Formulas PDF PDF Image

Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depression Head = Depression Head in Well 2*10^((1*Time Interval)/2.303)
h_d = h_w2*10^((1*Δ_t)/2.303)
This formula uses 3 Variables

Variables Used

Depression Head - (Measured in Meter) - Depression Head is the difference of level of waters table and the water level in the well when pumping stopped.
Depression Head in Well 2 - (Measured in Meter) - Depression Head in Well 2 is depression head in the well at a time T after the pumping stopped.
Time Interval - (Measured in Second) - Time Interval is the amount of time required for the total change in concentration.

STEP 1: Convert Input(s) to Base Unit

Depression Head in Well 2: 10 Meter --> 10 Meter No Conversion Required
Time Interval: 1.01 Second --> 1.01 Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_d = h_w2*10^((1*Δ_t)/2.303) --> 10*10^((1*1.01)/2.303)

Evaluating ... ...

h_d = 27.4510146828855

STEP 3: Convert Result to Output's Unit

27.4510146828855 Meter --> No Conversion Required

FINAL ANSWER

27.4510146828855 ≈ 27.45101 Meter <-- Depression Head

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Recuperation Test » Depression Head when Pumping Stopped » Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Depression Head when Pumping Stopped Calculators

Depression Head in well given pumping stopped and clay soil is present

LaTeX Go Depression Head = Depression Head in Well 2*exp(0.25*Total Time Interval)

Depression Head in Well given Pumping Stopped and Fine Sand is Present

LaTeX Go Depression Head = Depression Head in Well 2*exp(0.5*Time Interval)

Depression Head in Well given Pumping Stopped and Coarse Sand is Present

LaTeX Go Depression Head = Depression Head in Well 2*exp(1*Time Interval)

Depression Head in Well given Pumping Stopped with Base 10 and Clay soil is Present

LaTeX Go Depression Head = Depression Head in Well 2*10^((0.25*Total Time Interval)/2.303)

Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present Formula

LaTeX Go

Depression Head = Depression Head in Well 2*10^((1*Time Interval)/2.303)
h_d = h_w2*10^((1*Δ_t)/2.303)

What is Coarse Sand?

Coarse sand refers to soil particles that are larger in size and typically include gravel, sand, and silt. This type of soil has distinct characteristics that influence its physical properties, drainage capabilities, and suitability for various construction and agricultural applications. Coarse soil is often classified based on particle size and texture.

How to Calculate Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present?

Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present calculator uses Depression Head = Depression Head in Well 2*10^((1*Time Interval)/2.303) to calculate the Depression Head, The Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present formula is defined as the calculation of the value of depression head in well when we have prior information of other parameters used. Depression Head is denoted by h_d symbol.

How to calculate Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present using this online calculator? To use this online calculator for Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present, enter Depression Head in Well 2 (h_w2) & Time Interval (Δ_t) and hit the calculate button. Here is how the Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present calculation can be explained with given input values -> 27.45101 = 10*10^((1*1.01)/2.303).

FAQ

What is Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present?

The Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present formula is defined as the calculation of the value of depression head in well when we have prior information of other parameters used and is represented as h_d = h_w2*10^((1*Δ_t)/2.303) or Depression Head = Depression Head in Well 2*10^((1*Time Interval)/2.303). Depression Head in Well 2 is depression head in the well at a time T after the pumping stopped & Time Interval is the amount of time required for the total change in concentration.

How to calculate Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present?

The Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present formula is defined as the calculation of the value of depression head in well when we have prior information of other parameters used is calculated using Depression Head = Depression Head in Well 2*10^((1*Time Interval)/2.303). To calculate Depression Head in Well given Pumping Stopped with Base 10 and Coarse Sand is Present, you need Depression Head in Well 2 (h_w2) & Time Interval (Δ_t). With our tool, you need to enter the respective value for Depression Head in Well 2 & Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Depression Head?

In this formula, Depression Head uses Depression Head in Well 2 & Time Interval. We can use 3 other way(s) to calculate the same, which is/are as follows -

Depression Head = Depression Head in Well 2*exp(0.25*Total Time Interval)
Depression Head = Depression Head in Well 2*10^((0.25*Total Time Interval)/2.303)
Depression Head = Depression Head in Well 2*exp(0.5*Time Interval)

Home

FREE PDFs

🔍 Search