Density of material given convective heat and mass transfer coefficient Calculator

✖Heat Transfer Coefficient is the measure of convective heat transfer between a fluid and a solid, occurring in both laminar and turbulent flow conditions.ⓘ Heat Transfer Coefficient [h_t]			+10% -10%
✖Convective Mass Transfer Coefficient is the rate of mass transfer between a surface and a moving fluid in laminar and turbulent flow conditions.ⓘ Convective Mass Transfer Coefficient [k_L]			+10% -10%
✖Specific Heat is the amount of heat energy required to raise the temperature of a unit mass of fluid by one degree Celsius in laminar or turbulent flow.ⓘ Specific Heat [Q_s]			+10% -10%
✖Lewis Number is a dimensionless ratio used to characterize fluid flow, particularly in laminar and turbulent flow regimes, to predict heat and mass transfer rates.ⓘ Lewis Number [L_e]			+10% -10%

✖Density in laminar and turbulent flow is the mass of fluid per unit volume, characterizing the fluid's compactness in a given flow regime.ⓘ Density of material given convective heat and mass transfer coefficient [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Heat and Mass Transfer Formula PDF PDF Image

Density of material given convective heat and mass transfer coefficient Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density = (Heat Transfer Coefficient)/(Convective Mass Transfer Coefficient*Specific Heat*(Lewis Number^0.67))
ρ = (h_t)/(k_L*Q_s*(L_e^0.67))
This formula uses 5 Variables

Variables Used

Density - (Measured in Kilogram per Cubic Meter) - Density in laminar and turbulent flow is the mass of fluid per unit volume, characterizing the fluid's compactness in a given flow regime.
Heat Transfer Coefficient - (Measured in Watt per Square Meter per Kelvin) - Heat Transfer Coefficient is the measure of convective heat transfer between a fluid and a solid, occurring in both laminar and turbulent flow conditions.
Convective Mass Transfer Coefficient - (Measured in Meter per Second) - Convective Mass Transfer Coefficient is the rate of mass transfer between a surface and a moving fluid in laminar and turbulent flow conditions.
Specific Heat - (Measured in Joule per Kilogram per K) - Specific Heat is the amount of heat energy required to raise the temperature of a unit mass of fluid by one degree Celsius in laminar or turbulent flow.
Lewis Number - Lewis Number is a dimensionless ratio used to characterize fluid flow, particularly in laminar and turbulent flow regimes, to predict heat and mass transfer rates.

STEP 1: Convert Input(s) to Base Unit

Heat Transfer Coefficient: 13.2 Watt per Square Meter per Kelvin --> 13.2 Watt per Square Meter per Kelvin No Conversion Required
Convective Mass Transfer Coefficient: 0.004118 Meter per Second --> 0.004118 Meter per Second No Conversion Required
Specific Heat: 1.1736 Joule per Kilogram per K --> 1.1736 Joule per Kilogram per K No Conversion Required
Lewis Number: 4.5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = (h_t)/(k_L*Q_s*(L_e^0.67)) --> (13.2)/(0.004118*1.1736*(4.5^0.67))

Evaluating ... ...

ρ = 997.045789592792

STEP 3: Convert Result to Output's Unit

997.045789592792 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

997.045789592792 ≈ 997.0458 Kilogram per Cubic Meter <-- Density

(Calculation completed in 00.021 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Convective Mass Transfer » Mechanical » Laminar and Turbulent Flow » Density of material given convective heat and mass transfer coefficient

Credits

Created by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 500+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Laminar and Turbulent Flow Calculators

Density of material given convective heat and mass transfer coefficient

LaTeX Go Density = (Heat Transfer Coefficient)/(Convective Mass Transfer Coefficient*Specific Heat*(Lewis Number^0.67))

Friction factor in internal flow

LaTeX Go Friction Factor = (8*Convective Mass Transfer Coefficient*(Schmidt Number^0.67))/Free Stream Velocity

Average Sherwood Number of Combined Laminar and Turbulent Flow

LaTeX Go Average Sherwood Number = ((0.037*(Reynolds Number^0.8))-871)*(Schmidt Number^0.333)

Drag coefficient of flat plate in combined laminar turbulent flow

LaTeX Go Drag Coefficient = 0.0571/(Reynolds Number^0.2)

Density of material given convective heat and mass transfer coefficient Formula

LaTeX Go

Density = (Heat Transfer Coefficient)/(Convective Mass Transfer Coefficient*Specific Heat*(Lewis Number^0.67))
ρ = (h_t)/(k_L*Q_s*(L_e^0.67))

What is Mass Transfer Coefficient?

The mass transfer coefficient is a parameter that quantifies the rate at which a substance moves from one phase to another or within a phase due to concentration gradients. It indicates how efficiently mass transfer occurs in processes like diffusion, convection, or adsorption. The coefficient is typically expressed in units of length per time and varies based on factors such as fluid properties, flow conditions, temperature, and surface area. In engineering applications, the mass transfer coefficient is critical for designing and optimizing processes like chemical reactors, distillation columns, and absorption systems, as it helps predict the rates of mass transfer and overall system performance.

How to Calculate Density of material given convective heat and mass transfer coefficient?

Density of material given convective heat and mass transfer coefficient calculator uses Density = (Heat Transfer Coefficient)/(Convective Mass Transfer Coefficient*Specific Heat*(Lewis Number^0.67)) to calculate the Density, Density of material given convective heat and mass transfer coefficient formula is defined as a measure of the mass per unit volume of a substance, which is influenced by the convective heat and mass transfer coefficient, and is essential in understanding the behavior of fluids in various engineering applications. Density is denoted by ρ symbol.

How to calculate Density of material given convective heat and mass transfer coefficient using this online calculator? To use this online calculator for Density of material given convective heat and mass transfer coefficient, enter Heat Transfer Coefficient (h_t), Convective Mass Transfer Coefficient (k_L), Specific Heat (Q_s) & Lewis Number (L_e) and hit the calculate button. Here is how the Density of material given convective heat and mass transfer coefficient calculation can be explained with given input values -> 996.9608 = (13.2)/(0.004118*1.1736*(4.5^0.67)).

FAQ

What is Density of material given convective heat and mass transfer coefficient?

Density of material given convective heat and mass transfer coefficient formula is defined as a measure of the mass per unit volume of a substance, which is influenced by the convective heat and mass transfer coefficient, and is essential in understanding the behavior of fluids in various engineering applications and is represented as ρ = (h_t)/(k_L*Q_s*(L_e^0.67)) or Density = (Heat Transfer Coefficient)/(Convective Mass Transfer Coefficient*Specific Heat*(Lewis Number^0.67)). Heat Transfer Coefficient is the measure of convective heat transfer between a fluid and a solid, occurring in both laminar and turbulent flow conditions, Convective Mass Transfer Coefficient is the rate of mass transfer between a surface and a moving fluid in laminar and turbulent flow conditions, Specific Heat is the amount of heat energy required to raise the temperature of a unit mass of fluid by one degree Celsius in laminar or turbulent flow & Lewis Number is a dimensionless ratio used to characterize fluid flow, particularly in laminar and turbulent flow regimes, to predict heat and mass transfer rates.

How to calculate Density of material given convective heat and mass transfer coefficient?

Density of material given convective heat and mass transfer coefficient formula is defined as a measure of the mass per unit volume of a substance, which is influenced by the convective heat and mass transfer coefficient, and is essential in understanding the behavior of fluids in various engineering applications is calculated using Density = (Heat Transfer Coefficient)/(Convective Mass Transfer Coefficient*Specific Heat*(Lewis Number^0.67)). To calculate Density of material given convective heat and mass transfer coefficient, you need Heat Transfer Coefficient (h_t), Convective Mass Transfer Coefficient (k_L), Specific Heat (Q_s) & Lewis Number (L_e). With our tool, you need to enter the respective value for Heat Transfer Coefficient, Convective Mass Transfer Coefficient, Specific Heat & Lewis Number and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search