HCF of three numbers

Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp Calculator

Chemistry Engineering Financial Health More >>

↳

Kinetic Theory of Gases Analytical chemistry Atmospheric Chemistry Atomic structure More >>

⤿

Density of Gas Acentric Factor Average Velocity of Gas Average velocity of gas and Acentric factor More >>

✖Volumetric coefficient of thermal expansion is the tendency of matter to change its volume in response to a change in temperature.ⓘ Volumetric Coefficient of Thermal Expansion [α]			+10% -10%
✖Temperature is the degree or intensity of heat present in a substance or object.ⓘ Temperature [T]			+10% -10%
✖The isothermal compressibility is the change in volume due to change in pressure at constant temperature.ⓘ Isothermal Compressibility [K_T]			+10% -10%
✖The Isentropic Compressibility is the change in volume due to change in pressure at constant entropy.ⓘ Isentropic Compressibility [K_S]			+10% -10%
✖Molar Specific Heat Capacity at Constant Pressure of a gas is the amount of heat required to raise the temperature of 1 mol of the gas by 1 °C at the constant pressure.ⓘ Molar Specific Heat Capacity at Constant Pressure [C_p]			+10% -10%

✖Density given VC of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.ⓘ Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp [ρ_vC]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Density of Gas Formulas PDF PDF Image

Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure)
ρ_vC = ((α^2)*T)/((K_T-K_S)*C_p)
This formula uses 6 Variables

Variables Used

Density given VC - (Measured in Kilogram per Cubic Meter) - Density given VC of a material shows the denseness of that material in a specific given area. This is taken as mass per unit volume of a given object.
Volumetric Coefficient of Thermal Expansion - (Measured in 1 Per Kelvin) - Volumetric coefficient of thermal expansion is the tendency of matter to change its volume in response to a change in temperature.
Temperature - (Measured in Kelvin) - Temperature is the degree or intensity of heat present in a substance or object.
Isothermal Compressibility - (Measured in Square Meter per Newton) - The isothermal compressibility is the change in volume due to change in pressure at constant temperature.
Isentropic Compressibility - (Measured in Square Meter per Newton) - The Isentropic Compressibility is the change in volume due to change in pressure at constant entropy.
Molar Specific Heat Capacity at Constant Pressure - (Measured in Joule Per Kelvin Per Mole) - Molar Specific Heat Capacity at Constant Pressure of a gas is the amount of heat required to raise the temperature of 1 mol of the gas by 1 °C at the constant pressure.

STEP 1: Convert Input(s) to Base Unit

Volumetric Coefficient of Thermal Expansion: 25 1 Per Kelvin --> 25 1 Per Kelvin No Conversion Required
Temperature: 85 Kelvin --> 85 Kelvin No Conversion Required
Isothermal Compressibility: 75 Square Meter per Newton --> 75 Square Meter per Newton No Conversion Required
Isentropic Compressibility: 70 Square Meter per Newton --> 70 Square Meter per Newton No Conversion Required
Molar Specific Heat Capacity at Constant Pressure: 122 Joule Per Kelvin Per Mole --> 122 Joule Per Kelvin Per Mole No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_vC = ((α^2)*T)/((K_T-K_S)*C_p) --> ((25^2)*85)/((75-70)*122)

Evaluating ... ...

ρ_vC = 87.0901639344262

STEP 3: Convert Result to Output's Unit

87.0901639344262 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

87.0901639344262 ≈ 87.09016 Kilogram per Cubic Meter <-- Density given VC

(Calculation completed in 00.021 seconds)

You are here -

Home » Chemistry » Kinetic Theory of Gases » Density of Gas » Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp

Credits

Created by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has created this Calculator and 800+ more calculators!

Verified by Prashant Singh

K J Somaiya College of science (K J Somaiya), Mumbai

Prashant Singh has verified this Calculator and 500+ more calculators!

< Density of Gas Calculators

Density of Gas given Average Velocity and Pressure in 2D

LaTeX Go Density of Gas given AV and P = (pi*Pressure of Gas)/(2*((Average Velocity of Gas)^2))

Density of Gas given Average Velocity and Pressure

LaTeX Go Density of Gas given AV and P = (8*Pressure of Gas)/(pi*((Average Velocity of Gas)^2))

Density of Gas given Root Mean Square Speed and Pressure

LaTeX Go Density of Gas given RMS and P = (3*Pressure of Gas)/((Root Mean Square Speed)^2)

Density of Gas given Most Probable Speed Pressure

LaTeX Go Density of Gas given MPS = (2*Pressure of Gas)/((Most Probable Velocity)^2)

Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp Formula

LaTeX Go

What are the postulates of kinetic theory of gases?

1) Actual volume of gas molecules is negligible in comparison to the total volume of the gas. 2) no force of attraction between the gas molecules. 3) Particles of gas are in constant random motion. 4) Particles of gas collide with each other and with the walls of the container. 5)Collisions are perfectly elastic. 6) Different particles of the gas, have different speeds. 7) The average kinetic energy of the gas molecule is directly proportional to the absolute temperature.

How to Calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp?

Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp calculator uses Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure) to calculate the Density given VC, The Density given volumetric coefficient of thermal expansion, compressibility factors and Cp is defined as material mass per unit volume and designated by the symbol ρ (rho). Density given VC is denoted by ρ_vC symbol.

How to calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp using this online calculator? To use this online calculator for Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp, enter Volumetric Coefficient of Thermal Expansion (α), Temperature (T), Isothermal Compressibility (K_T), Isentropic Compressibility (K_S) & Molar Specific Heat Capacity at Constant Pressure (C_p) and hit the calculate button. Here is how the Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp calculation can be explained with given input values -> 87.09016 = ((25^2)*85)/((75-70)*122).

FAQ

What is Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp?

The Density given volumetric coefficient of thermal expansion, compressibility factors and Cp is defined as material mass per unit volume and designated by the symbol ρ (rho) and is represented as ρ_vC = ((α^2)*T)/((K_T-K_S)*C_p) or Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure). Volumetric coefficient of thermal expansion is the tendency of matter to change its volume in response to a change in temperature, Temperature is the degree or intensity of heat present in a substance or object, The isothermal compressibility is the change in volume due to change in pressure at constant temperature, The Isentropic Compressibility is the change in volume due to change in pressure at constant entropy & Molar Specific Heat Capacity at Constant Pressure of a gas is the amount of heat required to raise the temperature of 1 mol of the gas by 1 °C at the constant pressure.

How to calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp?

The Density given volumetric coefficient of thermal expansion, compressibility factors and Cp is defined as material mass per unit volume and designated by the symbol ρ (rho) is calculated using Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*Molar Specific Heat Capacity at Constant Pressure). To calculate Density given Volumetric Coefficient of Thermal Expansion, Compressibility Factors and Cp, you need Volumetric Coefficient of Thermal Expansion (α), Temperature (T), Isothermal Compressibility (K_T), Isentropic Compressibility (K_S) & Molar Specific Heat Capacity at Constant Pressure (C_p). With our tool, you need to enter the respective value for Volumetric Coefficient of Thermal Expansion, Temperature, Isothermal Compressibility, Isentropic Compressibility & Molar Specific Heat Capacity at Constant Pressure and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Density given VC?

In this formula, Density given VC uses Volumetric Coefficient of Thermal Expansion, Temperature, Isothermal Compressibility, Isentropic Compressibility & Molar Specific Heat Capacity at Constant Pressure. We can use 1 other way(s) to calculate the same, which is/are as follows -

Density given VC = ((Volumetric Coefficient of Thermal Expansion^2)*Temperature)/((Isothermal Compressibility-Isentropic Compressibility)*(Molar Specific Heat Capacity at Constant Volume+[R]))

Home

FREE PDFs

🔍 Search