Density of material given Radial stress at center of solid disc Calculator

✖Radial stress refers to the stress that acts perpendicular to the longitudinal axis of a component, directed either towards or away from the central axis.ⓘ Radial Stress [σ_r]			+10% -10%
✖Angular velocity is a measure of how quickly an object rotates or revolves around a central point or axis, describes the rate of change of the angular position of the object with respect to time.ⓘ Angular Velocity [ω]			+10% -10%
✖Poisson's ratio is a measure of the deformation of a material in directions perpendicular to the direction of loading. It is defined as the negative ratio of transverse strain to axial strain.ⓘ Poisson's Ratio [𝛎]			+10% -10%
✖Outer radius disc is the distance from the center of the disc to its outer edge or boundary.ⓘ Outer Radius Disc [r_outer]			+10% -10%

✖Density of disc typically refers to the mass per unit volume of the disc material. It is a measure of how much mass is contained in a given volume of the disc.ⓘ Density of material given Radial stress at center of solid disc [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Density of material given Radial stress at center of solid disc Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2)))
ρ = ((8*σ_r)/((ω^2)*(3+𝛎)*(r_outer^2)))
This formula uses 5 Variables

Variables Used

Density Of Disc - (Measured in Kilogram per Cubic Meter) - Density of disc typically refers to the mass per unit volume of the disc material. It is a measure of how much mass is contained in a given volume of the disc.
Radial Stress - (Measured in Pascal) - Radial stress refers to the stress that acts perpendicular to the longitudinal axis of a component, directed either towards or away from the central axis.
Angular Velocity - (Measured in Radian per Second) - Angular velocity is a measure of how quickly an object rotates or revolves around a central point or axis, describes the rate of change of the angular position of the object with respect to time.
Poisson's Ratio - Poisson's ratio is a measure of the deformation of a material in directions perpendicular to the direction of loading. It is defined as the negative ratio of transverse strain to axial strain.
Outer Radius Disc - (Measured in Meter) - Outer radius disc is the distance from the center of the disc to its outer edge or boundary.

STEP 1: Convert Input(s) to Base Unit

Radial Stress: 100 Newton per Square Meter --> 100 Pascal (Check conversion here)
Angular Velocity: 11.2 Radian per Second --> 11.2 Radian per Second No Conversion Required
Poisson's Ratio: 0.3 --> No Conversion Required
Outer Radius Disc: 900 Millimeter --> 0.9 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = ((8*σ_r)/((ω^2)*(3+𝛎)*(r_outer^2))) --> ((8*100)/((11.2^2)*(3+0.3)*(0.9^2)))

Evaluating ... ...

ρ = 2.38591508432778

STEP 3: Convert Result to Output's Unit

2.38591508432778 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

2.38591508432778 ≈ 2.385915 Kilogram per Cubic Meter <-- Density Of Disc

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Rotating Disc And Cylinder » Expression for Stresses in Solid Disc » Mechanical » Density of Disc » Density of material given Radial stress at center of solid disc

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Density of Disc Calculators

Density of material given Circumferential stress in solid disc

LaTeX Go Density Of Disc = (((Constant at Boundary Condition/2)-Circumferential Stress)*8)/((Angular Velocity^2)*(Disc Radius^2)*((3*Poisson's Ratio)+1))

Density of disc material given Radial stress in solid disc and outer radius

LaTeX Go Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*((Outer Radius Disc^2)-(Radius of Element^2))))

Density of material given constant at boundary condition for circular disc

LaTeX Go Density Of Disc = (8*Constant at Boundary Condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio))

Density of material given Circumferential stress at center of solid disc

LaTeX Go Density Of Disc = ((8*Circumferential Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2)))

Density of material given Radial stress at center of solid disc Formula

LaTeX Go

Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2)))
ρ = ((8*σ_r)/((ω^2)*(3+𝛎)*(r_outer^2)))

What is radial and tangential stress?

The “Hoop Stress” or “Tangential Stress” acts on a line perpendicular to the “longitudinal “and the “radial stress;” this stress attempts to separate the pipe wall in the circumferential direction. This stress is caused by internal pressure.

How to Calculate Density of material given Radial stress at center of solid disc?

Density of material given Radial stress at center of solid disc calculator uses Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2))) to calculate the Density Of Disc, The Density of material given Radial stress at center of solid disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water). Density Of Disc is denoted by ρ symbol.

How to calculate Density of material given Radial stress at center of solid disc using this online calculator? To use this online calculator for Density of material given Radial stress at center of solid disc, enter Radial Stress (σ_r), Angular Velocity (ω), Poisson's Ratio (𝛎) & Outer Radius Disc (r_outer) and hit the calculate button. Here is how the Density of material given Radial stress at center of solid disc calculation can be explained with given input values -> 2.385915 = ((8*100)/((11.2^2)*(3+0.3)*(0.9^2))).

FAQ

What is Density of material given Radial stress at center of solid disc?

The Density of material given Radial stress at center of solid disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water) and is represented as ρ = ((8*σ_r)/((ω^2)*(3+𝛎)*(r_outer^2))) or Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2))). Radial stress refers to the stress that acts perpendicular to the longitudinal axis of a component, directed either towards or away from the central axis, Angular velocity is a measure of how quickly an object rotates or revolves around a central point or axis, describes the rate of change of the angular position of the object with respect to time, Poisson's ratio is a measure of the deformation of a material in directions perpendicular to the direction of loading. It is defined as the negative ratio of transverse strain to axial strain & Outer radius disc is the distance from the center of the disc to its outer edge or boundary.

How to calculate Density of material given Radial stress at center of solid disc?

The Density of material given Radial stress at center of solid disc formula is defined as a measure of mass per volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water) is calculated using Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2))). To calculate Density of material given Radial stress at center of solid disc, you need Radial Stress (σ_r), Angular Velocity (ω), Poisson's Ratio (𝛎) & Outer Radius Disc (r_outer). With our tool, you need to enter the respective value for Radial Stress, Angular Velocity, Poisson's Ratio & Outer Radius Disc and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Density Of Disc?

In this formula, Density Of Disc uses Radial Stress, Angular Velocity, Poisson's Ratio & Outer Radius Disc. We can use 3 other way(s) to calculate the same, which is/are as follows -

Density Of Disc = ((8*Radial Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*((Outer Radius Disc^2)-(Radius of Element^2))))
Density Of Disc = ((8*Circumferential Stress)/((Angular Velocity^2)*(3+Poisson's Ratio)*(Outer Radius Disc^2)))
Density Of Disc = (8*Constant at Boundary Condition)/((Angular Velocity^2)*(Outer Radius Disc^2)*(3+Poisson's Ratio))

Home

FREE PDFs

🔍 Search