Friction factor for Re greater than 10000 Calculator

✖Reynolds Number Dia is the ratio of inertial forces to viscous forces.ⓘ Reynolds Number Dia [Re_D]

+10%

-10%

✖The Friction factor or Moody chart is the plot of the relative roughness (e/D) of a pipe against Reynold's number.ⓘ Friction factor for Re greater than 10000 [f]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Internal Flow Formula PDF PDF Image

Friction factor for Re greater than 10000 Solution

STEP 0: Pre-Calculation Summary

Formula Used

Friction Factor = 0.184*Reynolds Number Dia^(-0.2)
f = 0.184*Re_D^(-0.2)
This formula uses 2 Variables

Variables Used

Friction Factor - The Friction factor or Moody chart is the plot of the relative roughness (e/D) of a pipe against Reynold's number.
Reynolds Number Dia - Reynolds Number Dia is the ratio of inertial forces to viscous forces.

STEP 1: Convert Input(s) to Base Unit

Reynolds Number Dia: 1600 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f = 0.184*Re_D^(-0.2) --> 0.184*1600^(-0.2)

Evaluating ... ...

f = 0.042072064777314

STEP 3: Convert Result to Output's Unit

0.042072064777314 --> No Conversion Required

FINAL ANSWER

0.042072064777314 ≈ 0.042072 <-- Friction Factor

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Heat and Mass Transfer » Internal Flow » Flow inside tubes » Mechanical » Turbulent Flow » Friction factor for Re greater than 10000

Credits

Created by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has created this Calculator and 500+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Turbulent Flow Calculators

Friction factor for rough tubes

LaTeX Go Friction Factor = 1.325/((ln((Surface Roughness/3.7*Diameter)+(5.74/(Reynolds Number^0.9))))^2)

Friction factor for Re greater than 2300

LaTeX Go Friction Factor = 0.25*(1.82*log10(Reynolds Number Dia)-1.64)^-2

Friction factor for Re greater than 10000

LaTeX Go Friction Factor = 0.184*Reynolds Number Dia^(-0.2)

Friction factor for transitional turbulent flow

LaTeX Go Friction Factor = 0.316*Reynolds Number Dia^-0.25

Friction factor for Re greater than 10000 Formula

LaTeX Go

Friction Factor = 0.184*Reynolds Number Dia^(-0.2)
f = 0.184*Re_D^(-0.2)

What is internal flow

Internal flow is a flow for which the fluid is confined by a surface. Hence the boundary layer is unable to develop without eventually being constrained. The internal flow configuration represents a convenient geometry for heating and cooling fluids used in chemical processing, environmental control, and energy conversion technologies.
An example includes flow in a pipe.

How to Calculate Friction factor for Re greater than 10000?

Friction factor for Re greater than 10000 calculator uses Friction Factor = 0.184*Reynolds Number Dia^(-0.2) to calculate the Friction Factor, The Friction factor for Re greater than 10000 formula is defined as a measure of the resistance to fluid flow of a duct. Friction Factor is denoted by f symbol.

How to calculate Friction factor for Re greater than 10000 using this online calculator? To use this online calculator for Friction factor for Re greater than 10000, enter Reynolds Number Dia (Re_D) and hit the calculate button. Here is how the Friction factor for Re greater than 10000 calculation can be explained with given input values -> 0.042072 = 0.184*1600^(-0.2).

FAQ

What is Friction factor for Re greater than 10000?

The Friction factor for Re greater than 10000 formula is defined as a measure of the resistance to fluid flow of a duct and is represented as f = 0.184*Re_D^(-0.2) or Friction Factor = 0.184*Reynolds Number Dia^(-0.2). Reynolds Number Dia is the ratio of inertial forces to viscous forces.

How to calculate Friction factor for Re greater than 10000?

The Friction factor for Re greater than 10000 formula is defined as a measure of the resistance to fluid flow of a duct is calculated using Friction Factor = 0.184*Reynolds Number Dia^(-0.2). To calculate Friction factor for Re greater than 10000, you need Reynolds Number Dia (Re_D). With our tool, you need to enter the respective value for Reynolds Number Dia and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Friction Factor?

In this formula, Friction Factor uses Reynolds Number Dia. We can use 3 other way(s) to calculate the same, which is/are as follows -

Friction Factor = 0.25*(1.82*log10(Reynolds Number Dia)-1.64)^-2
Friction Factor = 1.325/((ln((Surface Roughness/3.7*Diameter)+(5.74/(Reynolds Number^0.9))))^2)
Friction Factor = 0.316*Reynolds Number Dia^-0.25

Home

FREE PDFs

🔍 Search