Degree of Restraint (Butt joints) Calculator

✖Transverse Shrinkage of Unrestrained Joint is shrinkage produced when there is no restriction on the joint.ⓘ Transverse Shrinkage of Unrestrained Joint [S]			+10% -10%
✖Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.ⓘ Transverse Shrinkage [s]			+10% -10%

✖Degree of restraint is defined as the amount of reaction stress for a unit transverse shrinkage.ⓘ Degree of Restraint (Butt joints) [k_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Distortion in Weldments Formulas PDF PDF Image

Degree of Restraint (Butt joints) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Degree of Restraint = (1000/86*(Transverse Shrinkage of Unrestrained Joint/Transverse Shrinkage-1))^(1/0.87)
k_s = (1000/86*(S/s-1))^(1/0.87)
This formula uses 3 Variables

Variables Used

Degree of Restraint - Degree of restraint is defined as the amount of reaction stress for a unit transverse shrinkage.
Transverse Shrinkage of Unrestrained Joint - (Measured in Meter) - Transverse Shrinkage of Unrestrained Joint is shrinkage produced when there is no restriction on the joint.
Transverse Shrinkage - (Measured in Meter) - Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.

STEP 1: Convert Input(s) to Base Unit

Transverse Shrinkage of Unrestrained Joint: 100 Millimeter --> 0.1 Meter (Check conversion here)
Transverse Shrinkage: 4 Millimeter --> 0.004 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

k_s = (1000/86*(S/s-1))^(1/0.87) --> (1000/86*(0.1/0.004-1))^(1/0.87)

Evaluating ... ...

k_s = 647.387227726476

STEP 3: Convert Result to Output's Unit

647.387227726476 --> No Conversion Required

FINAL ANSWER

647.387227726476 ≈ 647.3872 <-- Degree of Restraint

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Welding » Distortion in Weldments » Transverse Shrinkage in Joints » Butt Joints » Degree of Restraint (Butt joints)

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Chilvera Bhanu Teja

Institute of Aeronautical Engineering (IARE), Hyderabad

Chilvera Bhanu Teja has verified this Calculator and 200+ more calculators!

< Butt Joints Calculators

Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint

LaTeX Go Total Transverse Shrinkage = Transverse Shrinkage in First Pass+Constant For Multi Pass Shrinkage*(log10(Total Weight of Weld Metal Deposited/Weld Metal Deposited in First Pass))

Plate Thickness for given Transverse Shrinkage in Butt Joints

LaTeX Go Plate Thickness in Butt Joint = (5.08*Cross Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening))

Transverse Shrinkage in Butt Joints

LaTeX Go Transverse Shrinkage of Butt Joint = (5.08*(Cross Sectional Area of Weld/Plate Thickness in Butt Joint))+(1.27*Root Opening)

Cross-sectional area of weld for given transverse shrinkage in butt joints

LaTeX Go Cross Sectional Area of Weld = (Plate Thickness in Butt Joint*(Transverse Shrinkage of Butt Joint-1.27*Root Opening))/5.08

Degree of Restraint (Butt joints) Formula

LaTeX Go

Degree of Restraint = (1000/86*(Transverse Shrinkage of Unrestrained Joint/Transverse Shrinkage-1))^(1/0.87)
k_s = (1000/86*(S/s-1))^(1/0.87)

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Degree of Restraint (Butt joints)?

Degree of Restraint (Butt joints) calculator uses Degree of Restraint = (1000/86*(Transverse Shrinkage of Unrestrained Joint/Transverse Shrinkage-1))^(1/0.87) to calculate the Degree of Restraint, The Degree of Restraint (Butt joints) formula is defined as the amount of reaction stress for a unit transverse shrinkage. Degree of Restraint is denoted by k_s symbol.

How to calculate Degree of Restraint (Butt joints) using this online calculator? To use this online calculator for Degree of Restraint (Butt joints), enter Transverse Shrinkage of Unrestrained Joint (S) & Transverse Shrinkage (s) and hit the calculate button. Here is how the Degree of Restraint (Butt joints) calculation can be explained with given input values -> 647.3872 = (1000/86*(0.1/0.004-1))^(1/0.87).

FAQ

What is Degree of Restraint (Butt joints)?

The Degree of Restraint (Butt joints) formula is defined as the amount of reaction stress for a unit transverse shrinkage and is represented as k_s = (1000/86*(S/s-1))^(1/0.87) or Degree of Restraint = (1000/86*(Transverse Shrinkage of Unrestrained Joint/Transverse Shrinkage-1))^(1/0.87). Transverse Shrinkage of Unrestrained Joint is shrinkage produced when there is no restriction on the joint & Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.

How to calculate Degree of Restraint (Butt joints)?

The Degree of Restraint (Butt joints) formula is defined as the amount of reaction stress for a unit transverse shrinkage is calculated using Degree of Restraint = (1000/86*(Transverse Shrinkage of Unrestrained Joint/Transverse Shrinkage-1))^(1/0.87). To calculate Degree of Restraint (Butt joints), you need Transverse Shrinkage of Unrestrained Joint (S) & Transverse Shrinkage (s). With our tool, you need to enter the respective value for Transverse Shrinkage of Unrestrained Joint & Transverse Shrinkage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search