Deflection of conical spring Solution

STEP 0: Pre-Calculation Summary
Formula Used
Deflection of Conical Spring = .0123*((Actual Mean Diameter of Spring)^2)/Diameter of Spring Wire
y = .0123*((Da)^2)/dsw
This formula uses 3 Variables
Variables Used
Deflection of Conical Spring - (Measured in Meter) - Deflection of conical spring is how a spring responds when force is applied or released.
Actual Mean Diameter of Spring - (Measured in Meter) - Actual mean diameter of spring is a straight line passing from side to side through the centre of spring.
Diameter of Spring Wire - (Measured in Meter) - Diameter of spring wire is the diameter of the wire of which a spring is made.
STEP 1: Convert Input(s) to Base Unit
Actual Mean Diameter of Spring: 0.1 Millimeter --> 0.0001 Meter (Check conversion ​here)
Diameter of Spring Wire: 115 Millimeter --> 0.115 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
y = .0123*((Da)^2)/dsw --> .0123*((0.0001)^2)/0.115
Evaluating ... ...
y = 1.0695652173913E-09
STEP 3: Convert Result to Output's Unit
1.0695652173913E-09 Meter -->1.0695652173913E-06 Millimeter (Check conversion ​here)
FINAL ANSWER
1.0695652173913E-06 1.1E-6 Millimeter <-- Deflection of Conical Spring
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has created this Calculator and 100+ more calculators!
Verifier Image
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

Single Spring Installations Calculators

Inside diameter of member given Mean diameter of Conical spring
​ LaTeX ​ Go Inside Diameter = Mean Diameter of Conical Spring-((3/2)*Nominal Packing Cross-section of Bush Seal)
Mean diameter of conical spring
​ LaTeX ​ Go Mean Diameter of Conical Spring = Inside Diameter+((3/2)*Nominal Packing Cross-section of Bush Seal)
Nominal packing cross section given Mean diameter of Conical spring
​ LaTeX ​ Go Nominal Packing Cross-section of Bush Seal = (Mean Diameter of Conical Spring-Inside Diameter)*2/3
Diameter of wire for spring given Mean diameter of Conical spring
​ LaTeX ​ Go Diameter of Spring Wire = ((pi*(Mean Diameter of Conical Spring)^2)/139300)^1/3

Deflection of conical spring Formula

​LaTeX ​Go
Deflection of Conical Spring = .0123*((Actual Mean Diameter of Spring)^2)/Diameter of Spring Wire
y = .0123*((Da)^2)/dsw

What is Deflection of conical spring?

Deflection of conical spring is defined as how a spring responds when force is applied or released.compression spring compresses one inch for every 200 pounds of load applied to it, its deflection rate is 200 lbs. per inch.

How to Calculate Deflection of conical spring?

Deflection of conical spring calculator uses Deflection of Conical Spring = .0123*((Actual Mean Diameter of Spring)^2)/Diameter of Spring Wire to calculate the Deflection of Conical Spring, The Deflection of conical spring formula is defined as how a spring responds when force is applied or released. Deflection of Conical Spring is denoted by y symbol.

How to calculate Deflection of conical spring using this online calculator? To use this online calculator for Deflection of conical spring, enter Actual Mean Diameter of Spring (Da) & Diameter of Spring Wire (dsw) and hit the calculate button. Here is how the Deflection of conical spring calculation can be explained with given input values -> 154.4452 = .0123*((0.0001)^2)/0.115.

FAQ

What is Deflection of conical spring?
The Deflection of conical spring formula is defined as how a spring responds when force is applied or released and is represented as y = .0123*((Da)^2)/dsw or Deflection of Conical Spring = .0123*((Actual Mean Diameter of Spring)^2)/Diameter of Spring Wire. Actual mean diameter of spring is a straight line passing from side to side through the centre of spring & Diameter of spring wire is the diameter of the wire of which a spring is made.
How to calculate Deflection of conical spring?
The Deflection of conical spring formula is defined as how a spring responds when force is applied or released is calculated using Deflection of Conical Spring = .0123*((Actual Mean Diameter of Spring)^2)/Diameter of Spring Wire. To calculate Deflection of conical spring, you need Actual Mean Diameter of Spring (Da) & Diameter of Spring Wire (dsw). With our tool, you need to enter the respective value for Actual Mean Diameter of Spring & Diameter of Spring Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!