Depth of Cut in Slab Milling using Tool Engagement Angle Calculator

✖Tool Engagement Angle in Milling is the angle made by the portion of the tool that engages with the workpiece during machining process.ⓘ Tool Engagement Angle in Milling [θ]			+10% -10%
✖Diameter of a Cutting Tool in Milling is the outer diameter of the cutting part of the tool.ⓘ Diameter of a Cutting Tool [D_cut]			+10% -10%

✖Depth of Cut in Milling is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.ⓘ Depth of Cut in Slab Milling using Tool Engagement Angle [d_cut]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Milling Operation Formulas PDF PDF Image

Depth of Cut in Slab Milling using Tool Engagement Angle Solution

STEP 0: Pre-Calculation Summary

Formula Used

Depth of Cut in Milling = (1-cos(Tool Engagement Angle in Milling))*Diameter of a Cutting Tool/2
d_cut = (1-cos(θ))*D_cut/2
This formula uses 1 Functions, 3 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Depth of Cut in Milling - (Measured in Meter) - Depth of Cut in Milling is the tertiary cutting motion that provides a necessary depth of material that is required to remove by machining. It is usually given in the third perpendicular direction.
Tool Engagement Angle in Milling - (Measured in Radian) - Tool Engagement Angle in Milling is the angle made by the portion of the tool that engages with the workpiece during machining process.
Diameter of a Cutting Tool - (Measured in Meter) - Diameter of a Cutting Tool in Milling is the outer diameter of the cutting part of the tool.

STEP 1: Convert Input(s) to Base Unit

Tool Engagement Angle in Milling: 35 Degree --> 0.610865238197901 Radian (Check conversion here)
Diameter of a Cutting Tool: 54.67 Millimeter --> 0.05467 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_cut = (1-cos(θ))*D_cut/2 --> (1-cos(0.610865238197901))*0.05467/2

Evaluating ... ...

d_cut = 0.00494347886935862

STEP 3: Convert Result to Output's Unit

0.00494347886935862 Meter -->4.94347886935862 Millimeter (Check conversion here)

FINAL ANSWER

4.94347886935862 ≈ 4.943479 Millimeter <-- Depth of Cut in Milling

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Milling Operation » Slab and Slide Milling » Depth of Cut in Slab Milling using Tool Engagement Angle

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Slab and Slide Milling Calculators

Maximum Chip Thickness obtained in Slab Milling using Tool Engagement Angle

LaTeX Go Max Chip Thickness in Slab Milling = Feed Speed in Milling*sin(Tool Engagement Angle in Milling)/(Number of Teeth on Cutting Tool*Rotational Frequency in Milling)

Tool Engagement Angle in Slab Milling using Depth of Cut

LaTeX Go Tool Engagement Angle in Milling = acos(1-(2*Depth of Cut in Milling/Diameter of a Cutting Tool))

Feed Speed of Workpiece in Slab Milling

LaTeX Go Feed Speed in Milling = Feed Rate in Milling*Reciprocating Strokes Frequency

Feed in Slab Milling given Feed Speed

LaTeX Go Feed Rate in Milling = Feed Speed in Milling/Reciprocating Strokes Frequency

Depth of Cut in Slab Milling using Tool Engagement Angle Formula

LaTeX Go

Depth of Cut in Milling = (1-cos(Tool Engagement Angle in Milling))*Diameter of a Cutting Tool/2
d_cut = (1-cos(θ))*D_cut/2

Tool Engagement Controlled Milling

The goal of tool engagement controlled milling is to achieve the highest possible productivity. This requires gaining complete control of the cutting environment in order to cut optimally everywhere along the toolpath.

How to Calculate Depth of Cut in Slab Milling using Tool Engagement Angle?

Depth of Cut in Slab Milling using Tool Engagement Angle calculator uses Depth of Cut in Milling = (1-cos(Tool Engagement Angle in Milling))*Diameter of a Cutting Tool/2 to calculate the Depth of Cut in Milling, The Depth of Cut in Slab Milling using Tool Engagement Angle is a method to determine the maximum Depth of Cut possible for a given Engagement of Tool and Workpiece. Depth of Cut in Milling is denoted by d_cut symbol.

How to calculate Depth of Cut in Slab Milling using Tool Engagement Angle using this online calculator? To use this online calculator for Depth of Cut in Slab Milling using Tool Engagement Angle, enter Tool Engagement Angle in Milling (θ) & Diameter of a Cutting Tool (D_cut) and hit the calculate button. Here is how the Depth of Cut in Slab Milling using Tool Engagement Angle calculation can be explained with given input values -> 4748.227 = (1-cos(0.610865238197901))*0.05467/2.

FAQ

What is Depth of Cut in Slab Milling using Tool Engagement Angle?

The Depth of Cut in Slab Milling using Tool Engagement Angle is a method to determine the maximum Depth of Cut possible for a given Engagement of Tool and Workpiece and is represented as d_cut = (1-cos(θ))*D_cut/2 or Depth of Cut in Milling = (1-cos(Tool Engagement Angle in Milling))*Diameter of a Cutting Tool/2. Tool Engagement Angle in Milling is the angle made by the portion of the tool that engages with the workpiece during machining process & Diameter of a Cutting Tool in Milling is the outer diameter of the cutting part of the tool.

How to calculate Depth of Cut in Slab Milling using Tool Engagement Angle?

The Depth of Cut in Slab Milling using Tool Engagement Angle is a method to determine the maximum Depth of Cut possible for a given Engagement of Tool and Workpiece is calculated using Depth of Cut in Milling = (1-cos(Tool Engagement Angle in Milling))*Diameter of a Cutting Tool/2. To calculate Depth of Cut in Slab Milling using Tool Engagement Angle, you need Tool Engagement Angle in Milling (θ) & Diameter of a Cutting Tool (D_cut). With our tool, you need to enter the respective value for Tool Engagement Angle in Milling & Diameter of a Cutting Tool and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search