Freestream Density over Flat under Freestream Flow Conditions Calculator

✖The Drag Force is the resistance experienced by an object moving through a fluid, significantly impacting the performance and stability of hypersonic vehicles.ⓘ Drag Force [F_D]			+10% -10%
✖The Drag Coefficient is a dimensionless number that quantifies the drag or resistance of an object in a fluid environment, specifically for hypersonic vehicles.ⓘ Drag Coefficient [C_D]			+10% -10%
✖The Freestream Velocity is the speed of fluid flow far away from any influence of objects, crucial for analyzing hypersonic vehicle performance and aerodynamic characteristics.ⓘ Freestream Velocity [V_∞]			+10% -10%
✖The Reference Area is the projected area of a hypersonic vehicle that is used for aerodynamic analysis and performance evaluation in flight.ⓘ Reference Area [S]			+10% -10%

✖The Freestream Density is the mass per unit volume of air in the flow field surrounding a hypersonic vehicle, crucial for understanding aerodynamic performance.ⓘ Freestream Density over Flat under Freestream Flow Conditions [ρ_∞]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Hypersonic Flow Formula PDF PDF Image

Freestream Density over Flat under Freestream Flow Conditions Solution

STEP 0: Pre-Calculation Summary

Formula Used

Freestream Density = Drag Force/(0.5*Drag Coefficient*Freestream Velocity^2*Reference Area)
ρ_∞ = F_D/(0.5*C_D*V_∞^2*S)
This formula uses 5 Variables

Variables Used

Freestream Density - (Measured in Kilogram per Cubic Meter) - The Freestream Density is the mass per unit volume of air in the flow field surrounding a hypersonic vehicle, crucial for understanding aerodynamic performance.
Drag Force - (Measured in Newton) - The Drag Force is the resistance experienced by an object moving through a fluid, significantly impacting the performance and stability of hypersonic vehicles.
Drag Coefficient - The Drag Coefficient is a dimensionless number that quantifies the drag or resistance of an object in a fluid environment, specifically for hypersonic vehicles.
Freestream Velocity - (Measured in Meter per Second) - The Freestream Velocity is the speed of fluid flow far away from any influence of objects, crucial for analyzing hypersonic vehicle performance and aerodynamic characteristics.
Reference Area - (Measured in Square Meter) - The Reference Area is the projected area of a hypersonic vehicle that is used for aerodynamic analysis and performance evaluation in flight.

STEP 1: Convert Input(s) to Base Unit

Drag Force: 81.98358 Newton --> 81.98358 Newton No Conversion Required
Drag Coefficient: 0.001537 --> No Conversion Required
Freestream Velocity: 100 Meter per Second --> 100 Meter per Second No Conversion Required
Reference Area: 5.08 Square Meter --> 5.08 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_∞ = F_D/(0.5*C_D*V_∞^2*S) --> 81.98358/(0.5*0.001537*100^2*5.08)

Evaluating ... ...

ρ_∞ = 2.1

STEP 3: Convert Result to Output's Unit

2.1 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

2.1 Kilogram per Cubic Meter <-- Freestream Density

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Hypersonic Flow » Flat Plate for Viscous Flow Case » Approximate Results Applied to Hypersonic Vehicles » Freestream Density over Flat under Freestream Flow Conditions

Credits

Created by Sanjay Krishna

Amrita School of Engineering (ASE), Vallikavu

Sanjay Krishna has created this Calculator and 300+ more calculators!

Verified by Sai Venkata Phanindra Chary Arendra

Vallurupalli Nageswara Rao Vignana Jyothi Institute of Engineering and Technology (VNRVJIET), Hyderabad

Sai Venkata Phanindra Chary Arendra has verified this Calculator and 300+ more calculators!

< Approximate Results Applied to Hypersonic Vehicles Calculators

Freestream Velocity over Flat Plate using Stanton Number

LaTeX Go Freestream Velocity = Local Heat Transfer Rate/(Stanton Number*Freestream Density*(Adiabatic Wall Enthalpy-Wall Enthalpy))

Freestream Density over Flat Plate using Stanton Number

LaTeX Go Freestream Density = Local Heat Transfer Rate/(Stanton Number*Freestream Velocity*(Adiabatic Wall Enthalpy-Wall Enthalpy))

Freestream Stanton Number for Flat Plate

LaTeX Go Stanton Number = Local Heat Transfer Rate/(Freestream Density*Freestream Velocity*(Adiabatic Wall Enthalpy-Wall Enthalpy))

Local Heat Transfer over Flat Plate using Stanton Number

LaTeX Go Local Heat Transfer Rate = Stanton Number*Freestream Density*Freestream Velocity*(Adiabatic Wall Enthalpy-Wall Enthalpy)

Freestream Density over Flat under Freestream Flow Conditions Formula

LaTeX Go

Freestream Density = Drag Force/(0.5*Drag Coefficient*Freestream Velocity^2*Reference Area)
ρ_∞ = F_D/(0.5*C_D*V_∞^2*S)

What is Drag Force?

A drag force is the resistance force caused by the motion of a body through a fluid, such as water or air. A drag force acts opposite to the direction of the oncoming flow velocity.

How to Calculate Freestream Density over Flat under Freestream Flow Conditions?

Freestream Density over Flat under Freestream Flow Conditions calculator uses Freestream Density = Drag Force/(0.5*Drag Coefficient*Freestream Velocity^2*Reference Area) to calculate the Freestream Density, Freestream Density over Flat under Freestream Flow Conditions formula is defined as a measure of air density in the freestream region, which is the undisturbed flow far away from the flat plate, under freestream flow conditions, and is an essential parameter in the study of viscous flow over a flat plate. Freestream Density is denoted by ρ_∞ symbol.

How to calculate Freestream Density over Flat under Freestream Flow Conditions using this online calculator? To use this online calculator for Freestream Density over Flat under Freestream Flow Conditions, enter Drag Force (F_D), Drag Coefficient (C_D), Freestream Velocity (V_∞) & Reference Area (S) and hit the calculate button. Here is how the Freestream Density over Flat under Freestream Flow Conditions calculation can be explained with given input values -> 2.100421 = 81.98358/(0.5*0.001537*100^2*5.08).

FAQ

What is Freestream Density over Flat under Freestream Flow Conditions?

Freestream Density over Flat under Freestream Flow Conditions formula is defined as a measure of air density in the freestream region, which is the undisturbed flow far away from the flat plate, under freestream flow conditions, and is an essential parameter in the study of viscous flow over a flat plate and is represented as ρ_∞ = F_D/(0.5*C_D*V_∞^2*S) or Freestream Density = Drag Force/(0.5*Drag Coefficient*Freestream Velocity^2*Reference Area). The Drag Force is the resistance experienced by an object moving through a fluid, significantly impacting the performance and stability of hypersonic vehicles, The Drag Coefficient is a dimensionless number that quantifies the drag or resistance of an object in a fluid environment, specifically for hypersonic vehicles, The Freestream Velocity is the speed of fluid flow far away from any influence of objects, crucial for analyzing hypersonic vehicle performance and aerodynamic characteristics & The Reference Area is the projected area of a hypersonic vehicle that is used for aerodynamic analysis and performance evaluation in flight.

How to calculate Freestream Density over Flat under Freestream Flow Conditions?

Freestream Density over Flat under Freestream Flow Conditions formula is defined as a measure of air density in the freestream region, which is the undisturbed flow far away from the flat plate, under freestream flow conditions, and is an essential parameter in the study of viscous flow over a flat plate is calculated using Freestream Density = Drag Force/(0.5*Drag Coefficient*Freestream Velocity^2*Reference Area). To calculate Freestream Density over Flat under Freestream Flow Conditions, you need Drag Force (F_D), Drag Coefficient (C_D), Freestream Velocity (V_∞) & Reference Area (S). With our tool, you need to enter the respective value for Drag Force, Drag Coefficient, Freestream Velocity & Reference Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Freestream Density?

In this formula, Freestream Density uses Drag Force, Drag Coefficient, Freestream Velocity & Reference Area. We can use 1 other way(s) to calculate the same, which is/are as follows -

Freestream Density = Local Heat Transfer Rate/(Stanton Number*Freestream Velocity*(Adiabatic Wall Enthalpy-Wall Enthalpy))

Home

FREE PDFs

🔍 Search