Elongation in Pipes given Change in Temperature Calculator

✖The Original Length refers to the material refers to its initial size or dimension before any external forces are applied.ⓘ Original Length [L₀]			+10% -10%
✖Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.ⓘ Thermal Expansion Coefficient [α]			+10% -10%
✖The Change in Temperature refers to the difference between the initial and final temperature.ⓘ Change in Temperature [∆T]			+10% -10%

✖The Elongation refers to the change in length due to subjected load.ⓘ Elongation in Pipes given Change in Temperature [∆]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sewers their Construction , Maintenance and Required Appurtenances Formulas PDF PDF Image

Elongation in Pipes given Change in Temperature Solution

STEP 0: Pre-Calculation Summary

Formula Used

Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature
∆ = L₀*α*∆T
This formula uses 4 Variables

Variables Used

Elongation - (Measured in Meter) - The Elongation refers to the change in length due to subjected load.
Original Length - (Measured in Meter) - The Original Length refers to the material refers to its initial size or dimension before any external forces are applied.
Thermal Expansion Coefficient - (Measured in 1 Per Kelvin) - Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.
Change in Temperature - (Measured in Kelvin) - The Change in Temperature refers to the difference between the initial and final temperature.

STEP 1: Convert Input(s) to Base Unit

Original Length: 5000 Millimeter --> 5 Meter (Check conversion here)
Thermal Expansion Coefficient: 1.5E-06 1 Per Kelvin --> 1.5E-06 1 Per Kelvin No Conversion Required
Change in Temperature: 50 Kelvin --> 50 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

∆ = L₀*α*∆T --> 5*1.5E-06*50

Evaluating ... ...

∆ = 0.000375

STEP 3: Convert Result to Output's Unit

0.000375 Meter -->0.375 Millimeter (Check conversion here)

FINAL ANSWER

0.375 Millimeter <-- Elongation

(Calculation completed in 00.007 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Sewers their Construction , Maintenance and Required Appurtenances » Pressure Due to External Loads » Elongation in Pipes given Change in Temperature

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Pressure Due to External Loads Calculators

External Diameter of Pipe given Load Per Unit Length for Pipes

LaTeX Go External Diameter = sqrt(Load per unit Length/(Pipe Coefficient*Specific Weight of Fill))

Pipe Coefficient given Load Per Unit Length for Pipes

LaTeX Go Pipe Coefficient = (Load per unit Length/(Specific Weight of Fill*(External Diameter)^2))

Specific Weight of Fill Material given Load Per Unit Length for Pipes

LaTeX Go Specific Weight of Fill = Load per unit Length/(Pipe Coefficient*(External Diameter)^2)

Load Per Unit Length for Pipes Resting on Undisturbed Ground on Cohesion Less Soil

LaTeX Go Load per unit Length = Pipe Coefficient*Specific Weight of Fill*(External Diameter)^2

Elongation in Pipes given Change in Temperature Formula

LaTeX Go

Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature
∆ = L₀*α*∆T

What is elongation ?

A mechanical property of metal that is the degree to which a material may be bent, stretched, or compressed before it ruptures. It is a point between tensile strength and yield strength and is expressed as a percentage of the original length.

How to Calculate Elongation in Pipes given Change in Temperature?

Elongation in Pipes given Change in Temperature calculator uses Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature to calculate the Elongation, The Elongation in Pipes given Change in Temperature is defined as the state of being elongated or lengthened also : the process of growing or increasing in length chain. Elongation is denoted by ∆ symbol.

How to calculate Elongation in Pipes given Change in Temperature using this online calculator? To use this online calculator for Elongation in Pipes given Change in Temperature, enter Original Length (L₀), Thermal Expansion Coefficient (α) & Change in Temperature (∆T) and hit the calculate button. Here is how the Elongation in Pipes given Change in Temperature calculation can be explained with given input values -> 375 = 5*1.5E-06*50.

FAQ

What is Elongation in Pipes given Change in Temperature?

The Elongation in Pipes given Change in Temperature is defined as the state of being elongated or lengthened also : the process of growing or increasing in length chain and is represented as ∆ = L₀*α*∆T or Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature. The Original Length refers to the material refers to its initial size or dimension before any external forces are applied, Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating & The Change in Temperature refers to the difference between the initial and final temperature.

How to calculate Elongation in Pipes given Change in Temperature?

The Elongation in Pipes given Change in Temperature is defined as the state of being elongated or lengthened also : the process of growing or increasing in length chain is calculated using Elongation = Original Length*Thermal Expansion Coefficient*Change in Temperature. To calculate Elongation in Pipes given Change in Temperature, you need Original Length (L₀), Thermal Expansion Coefficient (α) & Change in Temperature (∆T). With our tool, you need to enter the respective value for Original Length, Thermal Expansion Coefficient & Change in Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search