Electrostatic Deflection Sensitivity of CRT Calculator

✖Distance between deflecting plates in Cathode ray tube is used to measure the electrostatic deflection as well as its sensitivity.ⓘ Distance between Deflecting Plates [d]			+10% -10%
✖Screen and Deflecting Plates Distance is the distance at which screen and mid of selecting plates are placed.ⓘ Screen and Deflecting Plates Distance [L]			+10% -10%
✖Deflection of beam is the degree to which a structural element is displaced under a load (due to its deformation). It may refer to an angle or a distance.ⓘ Deflection of Beam [δ]			+10% -10%
✖Electron Velocity is defined as the velocity of an electron when an external electric field is applied on it.ⓘ Electron Velocity [V_e]			+10% -10%

✖The Electrostatic deflection sensitivity measures the sensitivity of electrostatic deflecting system in cathode ray tube.ⓘ Electrostatic Deflection Sensitivity of CRT [S_e]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Charge Carrier Characteristics Formulas PDF PDF Image

Electrostatic Deflection Sensitivity of CRT Solution

STEP 0: Pre-Calculation Summary

Formula Used

Electrostatic Deflection Sensitivity = (Distance between Deflecting Plates*Screen and Deflecting Plates Distance)/(2*Deflection of Beam*Electron Velocity)
S_e = (d*L)/(2*δ*V_e)
This formula uses 5 Variables

Variables Used

Electrostatic Deflection Sensitivity - (Measured in Meter per Volt) - The Electrostatic deflection sensitivity measures the sensitivity of electrostatic deflecting system in cathode ray tube.
Distance between Deflecting Plates - (Measured in Meter) - Distance between deflecting plates in Cathode ray tube is used to measure the electrostatic deflection as well as its sensitivity.
Screen and Deflecting Plates Distance - (Measured in Meter) - Screen and Deflecting Plates Distance is the distance at which screen and mid of selecting plates are placed.
Deflection of Beam - (Measured in Meter) - Deflection of beam is the degree to which a structural element is displaced under a load (due to its deformation). It may refer to an angle or a distance.
Electron Velocity - (Measured in Meter per Second) - Electron Velocity is defined as the velocity of an electron when an external electric field is applied on it.

STEP 1: Convert Input(s) to Base Unit

Distance between Deflecting Plates: 2.5 Millimeter --> 0.0025 Meter (Check conversion here)
Screen and Deflecting Plates Distance: 50 Millimeter --> 0.05 Meter (Check conversion here)
Deflection of Beam: 1.15 Millimeter --> 0.00115 Meter (Check conversion here)
Electron Velocity: 501509 Meter per Second --> 501509 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_e = (d*L)/(2*δ*V_e) --> (0.0025*0.05)/(2*0.00115*501509)

Evaluating ... ...

S_e = 1.08368595751934E-07

STEP 3: Convert Result to Output's Unit

1.08368595751934E-07 Meter per Volt --> No Conversion Required

FINAL ANSWER

1.08368595751934E-07 ≈ 1.1E-7 Meter per Volt <-- Electrostatic Deflection Sensitivity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electronics » EDC » Charge Carrier Characteristics » Electrostatic Deflection Sensitivity of CRT

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Charge Carrier Characteristics Calculators

Current Density due to Electrons

LaTeX Go Electron Current Density = [Charge-e]*Electron Concentration*Mobility of Electron*Electric Field Intensity

Current Density due to Holes

LaTeX Go Holes Current Density = [Charge-e]*Holes Concentration*Mobility of Holes*Electric Field Intensity

Electrons Diffusion Constant

LaTeX Go Electron Diffusion Constant = Mobility of Electron*(([BoltZ]*Temperature)/[Charge-e])

Hole Diffusion Length

LaTeX Go Holes Diffusion Length = sqrt(Holes Diffusion Constant*Hole Carrier Lifetime)

Electrostatic Deflection Sensitivity of CRT Formula

LaTeX Go

Electrostatic Deflection Sensitivity = (Distance between Deflecting Plates*Screen and Deflecting Plates Distance)/(2*Deflection of Beam*Electron Velocity)
S_e = (d*L)/(2*δ*V_e)

Explain working of cathode ray tube.

The cathode ray tube uses deflecting plates for modifying the path of electrons. The electrons after exiting through the electron gun pass through deflecting plates. The CRT uses vertical and horizontal plates for focussing the electron beam.

The vertical plate produces an electrical field in the horizontal plane and causes horizontal deflection. The other pair is mounted horizontally and generates an electric field in the vertical plane and causes vertical deflection. These plates allow the beam to pass through the deflecting plates without striking them.

How to Calculate Electrostatic Deflection Sensitivity of CRT?

Electrostatic Deflection Sensitivity of CRT calculator uses Electrostatic Deflection Sensitivity = (Distance between Deflecting Plates*Screen and Deflecting Plates Distance)/(2*Deflection of Beam*Electron Velocity) to calculate the Electrostatic Deflection Sensitivity, Electrostatic Deflection Sensitivity of CRT is defined as the deflection of screen per unit deflection voltage and is achieved by aligning the path of charged particles by applying the electric field between the deflecting plates of cathode ray tube (CRT). Electrostatic Deflection Sensitivity is denoted by S_e symbol.

How to calculate Electrostatic Deflection Sensitivity of CRT using this online calculator? To use this online calculator for Electrostatic Deflection Sensitivity of CRT, enter Distance between Deflecting Plates (d), Screen and Deflecting Plates Distance (L), Deflection of Beam (δ) & Electron Velocity (V_e) and hit the calculate button. Here is how the Electrostatic Deflection Sensitivity of CRT calculation can be explained with given input values -> 1.1E-7 = (0.0025*0.05)/(2*0.00115*501509).

FAQ

What is Electrostatic Deflection Sensitivity of CRT?

Electrostatic Deflection Sensitivity of CRT is defined as the deflection of screen per unit deflection voltage and is achieved by aligning the path of charged particles by applying the electric field between the deflecting plates of cathode ray tube (CRT) and is represented as S_e = (d*L)/(2*δ*V_e) or Electrostatic Deflection Sensitivity = (Distance between Deflecting Plates*Screen and Deflecting Plates Distance)/(2*Deflection of Beam*Electron Velocity). Distance between deflecting plates in Cathode ray tube is used to measure the electrostatic deflection as well as its sensitivity, Screen and Deflecting Plates Distance is the distance at which screen and mid of selecting plates are placed, Deflection of beam is the degree to which a structural element is displaced under a load (due to its deformation). It may refer to an angle or a distance & Electron Velocity is defined as the velocity of an electron when an external electric field is applied on it.

How to calculate Electrostatic Deflection Sensitivity of CRT?

Electrostatic Deflection Sensitivity of CRT is defined as the deflection of screen per unit deflection voltage and is achieved by aligning the path of charged particles by applying the electric field between the deflecting plates of cathode ray tube (CRT) is calculated using Electrostatic Deflection Sensitivity = (Distance between Deflecting Plates*Screen and Deflecting Plates Distance)/(2*Deflection of Beam*Electron Velocity). To calculate Electrostatic Deflection Sensitivity of CRT, you need Distance between Deflecting Plates (d), Screen and Deflecting Plates Distance (L), Deflection of Beam (δ) & Electron Velocity (V_e). With our tool, you need to enter the respective value for Distance between Deflecting Plates, Screen and Deflecting Plates Distance, Deflection of Beam & Electron Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search