Electric Field Intensity given Electrophoretic Mobility Calculator

✖Drift Velocity of Dispersed Particle is defined as average velocity attained by charged particles, such as electrons, in a material due to an electric field.ⓘ Drift Velocity of Dispersed Particle [v]			+10% -10%
✖Electrophoretic Mobility is defined as the ratio of electrophoretic (drift) velocity to the electric field strength at the location where the velocity is measured.ⓘ Electrophoretic Mobility [μ_e]			+10% -10%

✖The Electric Field Intensity is a vector quantity that has both magnitude and direction. It depends on the amount of charge present on the test charge particle.ⓘ Electric Field Intensity given Electrophoretic Mobility [E]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Surface Chemistry Formula PDF PDF Image

Electric Field Intensity given Electrophoretic Mobility Solution

STEP 0: Pre-Calculation Summary

Formula Used

Electric Field Intensity = Drift Velocity of Dispersed Particle/Electrophoretic Mobility
E = v/μ_e
This formula uses 3 Variables

Variables Used

Electric Field Intensity - (Measured in Volt per Meter) - The Electric Field Intensity is a vector quantity that has both magnitude and direction. It depends on the amount of charge present on the test charge particle.
Drift Velocity of Dispersed Particle - (Measured in Meter per Second) - Drift Velocity of Dispersed Particle is defined as average velocity attained by charged particles, such as electrons, in a material due to an electric field.
Electrophoretic Mobility - (Measured in Square Meter per Volt per Second) - Electrophoretic Mobility is defined as the ratio of electrophoretic (drift) velocity to the electric field strength at the location where the velocity is measured.

STEP 1: Convert Input(s) to Base Unit

Drift Velocity of Dispersed Particle: 5 Meter per Second --> 5 Meter per Second No Conversion Required
Electrophoretic Mobility: 1.5 Square Meter per Volt per Second --> 1.5 Square Meter per Volt per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

E = v/μ_e --> 5/1.5

Evaluating ... ...

E = 3.33333333333333

STEP 3: Convert Result to Output's Unit

3.33333333333333 Volt per Meter --> No Conversion Required

FINAL ANSWER

3.33333333333333 ≈ 3.333333 Volt per Meter <-- Electric Field Intensity

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Surface Chemistry » Colloidal Structures in Surfactant Solutions » Electrophoresis and other Electrokinetics Phenomena » Electric Field Intensity given Electrophoretic Mobility

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Electrophoresis and other Electrokinetics Phenomena Calculators

Viscosity of Solvent given Zeta Potential using Smoluchowski Equation

LaTeX Go Dynamic Viscosity of Liquid = (Zeta Potential*Relative Permittivity of Solvent)/(4*pi*Ionic Mobility)

Ionic Mobility given Zeta Potential using Smoluchowski Equation

LaTeX Go Ionic Mobility = (Zeta Potential*Relative Permittivity of Solvent)/(4*pi*Dynamic Viscosity of Liquid)

Relative Permittivity of Solvent given Zeta Potential

LaTeX Go Relative Permittivity of Solvent = (4*pi*Dynamic Viscosity of Liquid*Ionic Mobility)/Zeta Potential

Zeta Potential using Smoluchowski Equation

LaTeX Go Zeta Potential = (4*pi*Dynamic Viscosity of Liquid*Ionic Mobility)/Relative Permittivity of Solvent

Electric Field Intensity given Electrophoretic Mobility Formula

LaTeX Go

Electric Field Intensity = Drift Velocity of Dispersed Particle/Electrophoretic Mobility
E = v/μ_e

What is Electrophoresis?

Electrophoresis is the motion of dispersed particles relative to a fluid under the influence of a spatially uniform electric field. Electrophoresis of positively charged particles (cations) is sometimes called cataphoresis, while electrophoresis of negatively charged particles (anions) is sometimes called anaphoresis. Electrophoresis is used in laboratories to separate macromolecules based on size. The technique applies a negative charge so proteins move towards a positive charge. Electrophoresis is used extensively in DNA, RNA and protein analysis.

How to Calculate Electric Field Intensity given Electrophoretic Mobility?

Electric Field Intensity given Electrophoretic Mobility calculator uses Electric Field Intensity = Drift Velocity of Dispersed Particle/Electrophoretic Mobility to calculate the Electric Field Intensity, The Electric Field Intensity given Electrophoretic Mobility is a vector field that quantifies the force experienced by a charged particle due to the influence of charge not associated with that particle. Electric Field Intensity is denoted by E symbol.

How to calculate Electric Field Intensity given Electrophoretic Mobility using this online calculator? To use this online calculator for Electric Field Intensity given Electrophoretic Mobility, enter Drift Velocity of Dispersed Particle (v) & Electrophoretic Mobility (μ_e) and hit the calculate button. Here is how the Electric Field Intensity given Electrophoretic Mobility calculation can be explained with given input values -> 3.333333 = 5/1.5.

FAQ

What is Electric Field Intensity given Electrophoretic Mobility?

The Electric Field Intensity given Electrophoretic Mobility is a vector field that quantifies the force experienced by a charged particle due to the influence of charge not associated with that particle and is represented as E = v/μ_e or Electric Field Intensity = Drift Velocity of Dispersed Particle/Electrophoretic Mobility. Drift Velocity of Dispersed Particle is defined as average velocity attained by charged particles, such as electrons, in a material due to an electric field & Electrophoretic Mobility is defined as the ratio of electrophoretic (drift) velocity to the electric field strength at the location where the velocity is measured.

How to calculate Electric Field Intensity given Electrophoretic Mobility?

The Electric Field Intensity given Electrophoretic Mobility is a vector field that quantifies the force experienced by a charged particle due to the influence of charge not associated with that particle is calculated using Electric Field Intensity = Drift Velocity of Dispersed Particle/Electrophoretic Mobility. To calculate Electric Field Intensity given Electrophoretic Mobility, you need Drift Velocity of Dispersed Particle (v) & Electrophoretic Mobility (μ_e). With our tool, you need to enter the respective value for Drift Velocity of Dispersed Particle & Electrophoretic Mobility and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search