Elastic Modulus of Rock given Deflection due to Moments on Arch Dam Calculator

✖Moment acting on Arch Dam is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.ⓘ Moment acting on Arch Dam [M_t]			+10% -10%
✖Constant K5 is defined as the constant depending on b/a ratio and Poisson ratio of an Arch Dam.ⓘ Constant K5 [K₅]			+10% -10%
✖The Deflection due to Moments on Arch Dam is the degree to which a structural element is displaced under a load (due to its deformation).ⓘ Deflection due to Moments on Arch Dam [δ]			+10% -10%
✖Thickness of Circular Arch refers to the distance between the intrados (the inner curve or surface of the arch) and the extrados (the outer curve or surface of the arch).ⓘ Thickness of Circular Arch [T]			+10% -10%

✖Elastic Modulus of Rock is defined as the linear elastic deformation response of rock under deformation.ⓘ Elastic Modulus of Rock given Deflection due to Moments on Arch Dam [E]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Arch Dams Formulas PDF PDF Image

Elastic Modulus of Rock given Deflection due to Moments on Arch Dam Solution

STEP 0: Pre-Calculation Summary

Formula Used

Elastic Modulus of Rock = Moment acting on Arch Dam*Constant K5/(Deflection due to Moments on Arch Dam*Thickness of Circular Arch)
E = M_t*K₅/(δ*T)
This formula uses 5 Variables

Variables Used

Elastic Modulus of Rock - (Measured in Pascal) - Elastic Modulus of Rock is defined as the linear elastic deformation response of rock under deformation.
Moment acting on Arch Dam - (Measured in Joule) - Moment acting on Arch Dam is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.
Constant K5 - Constant K5 is defined as the constant depending on b/a ratio and Poisson ratio of an Arch Dam.
Deflection due to Moments on Arch Dam - (Measured in Meter) - The Deflection due to Moments on Arch Dam is the degree to which a structural element is displaced under a load (due to its deformation).
Thickness of Circular Arch - (Measured in Meter) - Thickness of Circular Arch refers to the distance between the intrados (the inner curve or surface of the arch) and the extrados (the outer curve or surface of the arch).

STEP 1: Convert Input(s) to Base Unit

Moment acting on Arch Dam: 54.5 Newton Meter --> 54.5 Joule (Check conversion here)
Constant K5: 9.5 --> No Conversion Required
Deflection due to Moments on Arch Dam: 48.1 Meter --> 48.1 Meter No Conversion Required
Thickness of Circular Arch: 1.21 Meter --> 1.21 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

E = M_t*K₅/(δ*T) --> 54.5*9.5/(48.1*1.21)

Evaluating ... ...

E = 8.89589525953162

STEP 3: Convert Result to Output's Unit

8.89589525953162 Pascal -->8.89589525953162 Newton per Square Meter (Check conversion here)

FINAL ANSWER

8.89589525953162 ≈ 8.895895 Newton per Square Meter <-- Elastic Modulus of Rock

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Dams » Arch Dams » Elastic Modulus of Rock » Elastic Modulus of Rock given Deflection due to Moments on Arch Dam

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Elastic Modulus of Rock Calculators

Elastic Modulus of Rock given Rotation due to Moment on Arch Dam

LaTeX Go Elastic Modulus of Rock = Moment acting on Arch Dam*Constant K1/(Angle of Rotation*Thickness of Circular Arch*Horizontal Thickness of an Arch)

Elastic Modulus of Rock given Rotation due to Twist on Arch Dam

LaTeX Go Elastic Modulus of Rock = Cantilever Twisting Moment*Constant K4/(Angle of Rotation*Thickness of Circular Arch^2)

Elastic Modulus of Rock given Deflection due to Thrust on Arch Dam

LaTeX Go Elastic Modulus of Rock = Thrust of Abutments*Constant K2/(Deflection due to Moments on Arch Dam)

Elastic Modulus of Rock given Deflection due to Shear on Arch Dam

LaTeX Go Elastic Modulus of Rock = Shear Force*Constant K3/Deflection due to Moments on Arch Dam

Elastic Modulus of Rock given Deflection due to Moments on Arch Dam Formula

LaTeX Go

Elastic Modulus of Rock = Moment acting on Arch Dam*Constant K5/(Deflection due to Moments on Arch Dam*Thickness of Circular Arch)
E = M_t*K₅/(δ*T)

What is Elastic Modulus of Rock ?

The elastic modulus describes the linear elastic deformation response of rock under deformation. The static elastic modulus of an intact rock, Ei, is typically calculated as the slope of the stress–strain curve of a rock deforming under uniaxial compression (Ulusay and Hudson 2007).

How to Calculate Elastic Modulus of Rock given Deflection due to Moments on Arch Dam?

Elastic Modulus of Rock given Deflection due to Moments on Arch Dam calculator uses Elastic Modulus of Rock = Moment acting on Arch Dam*Constant K5/(Deflection due to Moments on Arch Dam*Thickness of Circular Arch) to calculate the Elastic Modulus of Rock, Elastic Modulus of Rock given Deflection due to Moments on Arch Dam formula is defined as measure of its stiffness and resistance to deformation when subjected to moments or forces on an arch dam, resulting in deflection. Elastic Modulus of Rock is denoted by E symbol.

How to calculate Elastic Modulus of Rock given Deflection due to Moments on Arch Dam using this online calculator? To use this online calculator for Elastic Modulus of Rock given Deflection due to Moments on Arch Dam, enter Moment acting on Arch Dam (M_t), Constant K5 (K₅), Deflection due to Moments on Arch Dam (δ) & Thickness of Circular Arch (T) and hit the calculate button. Here is how the Elastic Modulus of Rock given Deflection due to Moments on Arch Dam calculation can be explained with given input values -> 8.895895 = 54.5*9.5/(48.1*1.21).

FAQ

What is Elastic Modulus of Rock given Deflection due to Moments on Arch Dam?

Elastic Modulus of Rock given Deflection due to Moments on Arch Dam formula is defined as measure of its stiffness and resistance to deformation when subjected to moments or forces on an arch dam, resulting in deflection and is represented as E = M_t*K₅/(δ*T) or Elastic Modulus of Rock = Moment acting on Arch Dam*Constant K5/(Deflection due to Moments on Arch Dam*Thickness of Circular Arch). Moment acting on Arch Dam is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member, Constant K5 is defined as the constant depending on b/a ratio and Poisson ratio of an Arch Dam, The Deflection due to Moments on Arch Dam is the degree to which a structural element is displaced under a load (due to its deformation) & Thickness of Circular Arch refers to the distance between the intrados (the inner curve or surface of the arch) and the extrados (the outer curve or surface of the arch).

How to calculate Elastic Modulus of Rock given Deflection due to Moments on Arch Dam?

Elastic Modulus of Rock given Deflection due to Moments on Arch Dam formula is defined as measure of its stiffness and resistance to deformation when subjected to moments or forces on an arch dam, resulting in deflection is calculated using Elastic Modulus of Rock = Moment acting on Arch Dam*Constant K5/(Deflection due to Moments on Arch Dam*Thickness of Circular Arch). To calculate Elastic Modulus of Rock given Deflection due to Moments on Arch Dam, you need Moment acting on Arch Dam (M_t), Constant K5 (K₅), Deflection due to Moments on Arch Dam (δ) & Thickness of Circular Arch (T). With our tool, you need to enter the respective value for Moment acting on Arch Dam, Constant K5, Deflection due to Moments on Arch Dam & Thickness of Circular Arch and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Elastic Modulus of Rock?

In this formula, Elastic Modulus of Rock uses Moment acting on Arch Dam, Constant K5, Deflection due to Moments on Arch Dam & Thickness of Circular Arch. We can use 3 other way(s) to calculate the same, which is/are as follows -

Elastic Modulus of Rock = Moment acting on Arch Dam*Constant K1/(Angle of Rotation*Thickness of Circular Arch*Horizontal Thickness of an Arch)
Elastic Modulus of Rock = Thrust of Abutments*Constant K2/(Deflection due to Moments on Arch Dam)
Elastic Modulus of Rock = Shear Force*Constant K3/Deflection due to Moments on Arch Dam

Home

FREE PDFs

🔍 Search