Effective Pull in V-Belt Calculator

✖Belt Tension on Tight Side is defined as the belt's tension on the belt's tight side.ⓘ Belt Tension on Tight Side [P₁]			+10% -10%
✖Belt Tension on Loose Side is defined as the belt's tension on the belt's loose side.ⓘ Belt Tension on Loose Side [P₂]			+10% -10%

✖Effective Pull in V Belt is defined as the difference between the tension of the tight side of the belt and the loose side of the belt.ⓘ Effective Pull in V-Belt [P_e]

⎘ Copy

👎

Formula

Reset

👍

Download Design of Belt Drives Formulas PDF PDF Image

Effective Pull in V-Belt Solution

STEP 0: Pre-Calculation Summary

Formula Used

Effective Pull in V Belt = Belt Tension on Tight Side-Belt Tension on Loose Side
P_e = P₁-P₂
This formula uses 3 Variables

Variables Used

Effective Pull in V Belt - (Measured in Newton) - Effective Pull in V Belt is defined as the difference between the tension of the tight side of the belt and the loose side of the belt.
Belt Tension on Tight Side - (Measured in Newton) - Belt Tension on Tight Side is defined as the belt's tension on the belt's tight side.
Belt Tension on Loose Side - (Measured in Newton) - Belt Tension on Loose Side is defined as the belt's tension on the belt's loose side.

STEP 1: Convert Input(s) to Base Unit

Belt Tension on Tight Side: 800 Newton --> 800 Newton No Conversion Required
Belt Tension on Loose Side: 550 Newton --> 550 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_e = P₁-P₂ --> 800-550

Evaluating ... ...

P_e = 250

STEP 3: Convert Result to Output's Unit

250 Newton --> No Conversion Required

FINAL ANSWER

250 Newton <-- Effective Pull in V Belt

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Belt Drives » V Belt Drives » V Belt Characteristics and Parameters » Effective Pull in V-Belt

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< V Belt Characteristics and Parameters Calculators

Belt Velocity of V-Belt given Belt Tension in Loose Side

Go Belt Velocity = sqrt((Belt Tension on Tight Side-(e^(Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V belt angle/2)))*Belt Tension on Loose Side)/(Mass of Meter Length of V Belt*(1-(e^(Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V belt angle/2))))))

Angle of Wrap of V-Belt given Belt Tension in Loose Side of Belt

Go Wrap Angle on Pulley = sin(V belt angle/2)*ln((Belt Tension on Tight Side-Mass of Meter Length of V Belt*Belt Velocity^2)/(Belt Tension on Loose Side-Mass of Meter Length of V Belt*Belt Velocity^2))/Coefficient of Friction for Belt Drive

Belt Tension in Loose Side of V-Belt

Go Belt Tension on Loose Side = (Belt Tension on Tight Side-Mass of Meter Length of V Belt*Belt Velocity^2)/(e^Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V belt angle/2))+Mass of Meter Length of V Belt*Belt Velocity^2

Belt Tension in Tight Side of V-Belt

Go Belt Tension on Tight Side = (e^Coefficient of Friction for Belt Drive*Wrap Angle on Pulley/sin(V belt angle/2))*(Belt Tension on Loose Side-Mass of Meter Length of V Belt*Belt Velocity^2)+Mass of Meter Length of V Belt*Belt Velocity^2

Effective Pull in V-Belt Formula

Effective Pull in V Belt = Belt Tension on Tight Side-Belt Tension on Loose Side
P_e = P₁-P₂

Defne a V-Belt?

A V-belt is the rubber belt that drives the alternator, air conditioning compressor, power steering pump, and water pump. It's called a V-belt because of its “V” shaped cross-section. All belts wear out over time and need to be replaced. If you notice cracks or frayed peeling rubber, you should have the belt changed immediately to avoid serious engine damage that could occur.

How to Calculate Effective Pull in V-Belt?

Effective Pull in V-Belt calculator uses Effective Pull in V Belt = Belt Tension on Tight Side-Belt Tension on Loose Side to calculate the Effective Pull in V Belt, The Effective Pull in V-Belt formula is defined as the difference between the tension of the tight side of the belt and the loose side of the belt. Effective Pull in V Belt is denoted by P_e symbol.

How to calculate Effective Pull in V-Belt using this online calculator? To use this online calculator for Effective Pull in V-Belt, enter Belt Tension on Tight Side (P₁) & Belt Tension on Loose Side (P₂) and hit the calculate button. Here is how the Effective Pull in V-Belt calculation can be explained with given input values -> 250 = 800-550.

FAQ

What is Effective Pull in V-Belt?

The Effective Pull in V-Belt formula is defined as the difference between the tension of the tight side of the belt and the loose side of the belt and is represented as P_e = P₁-P₂ or Effective Pull in V Belt = Belt Tension on Tight Side-Belt Tension on Loose Side. Belt Tension on Tight Side is defined as the belt's tension on the belt's tight side & Belt Tension on Loose Side is defined as the belt's tension on the belt's loose side.

How to calculate Effective Pull in V-Belt?

The Effective Pull in V-Belt formula is defined as the difference between the tension of the tight side of the belt and the loose side of the belt is calculated using Effective Pull in V Belt = Belt Tension on Tight Side-Belt Tension on Loose Side. To calculate Effective Pull in V-Belt, you need Belt Tension on Tight Side (P₁) & Belt Tension on Loose Side (P₂). With our tool, you need to enter the respective value for Belt Tension on Tight Side & Belt Tension on Loose Side and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search