Eccentricity given Maximum Stress for Column with Eccentric Load Calculator

✖Maximum stress at crack tip refers to the highest stress concentration that occurs at the very tip of a crack in a material.ⓘ Maximum Stress at Crack Tip [σ_max]			+10% -10%
✖Eccentric load on column refers to a load that is applied at a point away from the centroidal axis of the column’s cross-section where loading introduces both axial stress and bending stress.ⓘ Eccentric Load on Column [P]			+10% -10%
✖Cross-sectional area of column is the area of the shape we get when we cut through the column perpendicular to its length, helps in determining the column’s ability to bear loads and resist stresses.ⓘ Cross-Sectional Area of Column [A_sectional]			+10% -10%
✖Section modulus for column is a geometric property of a cross-section that measures the ability of a section to resist bending and is crucial for determining the bending stress in structural elements.ⓘ Section Modulus for Column [S]			+10% -10%
✖Effective column length, often that represents the length of a column that influences its buckling behavior.ⓘ Effective Column Length [l_e]			+10% -10%
✖Modulus of elasticity of column is a measure of a material’s stiffness or rigidity, is defined as the ratio of longitudinal stress to longitudinal strain within the elastic limit of a material.ⓘ Modulus of Elasticity of Column [ε_column]			+10% -10%
✖Moment of inertia also known as the rotational inertia or angular mass, is a measure of an object’s resistance to changes in its rotational motion around a specific axis.ⓘ Moment of Inertia [I]			+10% -10%

✖Eccentricity of column refers to the distance between the line of action of the applied load and the centroidal axis of the column’s cross-section.ⓘ Eccentricity given Maximum Stress for Column with Eccentric Load [e]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Column And Struts Formula PDF PDF Image

Eccentricity given Maximum Stress for Column with Eccentric Load Solution

STEP 0: Pre-Calculation Summary

Formula Used

Eccentricity of Column = ((Maximum Stress at Crack Tip-(Eccentric Load on Column/Cross-Sectional Area of Column))*Section Modulus for Column)/((Eccentric Load on Column*sec(Effective Column Length*sqrt(Eccentric Load on Column/(Modulus of Elasticity of Column*Moment of Inertia))))/2)
e = ((σ_max-(P/A_sectional))*S)/((P*sec(l_e*sqrt(P/(ε_column*I))))/2)
This formula uses 2 Functions, 8 Variables

Functions Used

sec - Secant is a trigonometric function that is defined ratio of the hypotenuse to the shorter side adjacent to an acute angle (in a right-angled triangle); the reciprocal of a cosine., sec(Angle)
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Eccentricity of Column - (Measured in Meter) - Eccentricity of column refers to the distance between the line of action of the applied load and the centroidal axis of the column’s cross-section.
Maximum Stress at Crack Tip - (Measured in Pascal) - Maximum stress at crack tip refers to the highest stress concentration that occurs at the very tip of a crack in a material.
Eccentric Load on Column - (Measured in Newton) - Eccentric load on column refers to a load that is applied at a point away from the centroidal axis of the column’s cross-section where loading introduces both axial stress and bending stress.
Cross-Sectional Area of Column - (Measured in Square Meter) - Cross-sectional area of column is the area of the shape we get when we cut through the column perpendicular to its length, helps in determining the column’s ability to bear loads and resist stresses.
Section Modulus for Column - (Measured in Cubic Meter) - Section modulus for column is a geometric property of a cross-section that measures the ability of a section to resist bending and is crucial for determining the bending stress in structural elements.
Effective Column Length - (Measured in Meter) - Effective column length, often that represents the length of a column that influences its buckling behavior.
Modulus of Elasticity of Column - (Measured in Pascal) - Modulus of elasticity of column is a measure of a material’s stiffness or rigidity, is defined as the ratio of longitudinal stress to longitudinal strain within the elastic limit of a material.
Moment of Inertia - (Measured in Kilogram Square Meter) - Moment of inertia also known as the rotational inertia or angular mass, is a measure of an object’s resistance to changes in its rotational motion around a specific axis.

STEP 1: Convert Input(s) to Base Unit

Maximum Stress at Crack Tip: 6E-05 Megapascal --> 60 Pascal (Check conversion here)
Eccentric Load on Column: 40 Newton --> 40 Newton No Conversion Required
Cross-Sectional Area of Column: 0.66671 Square Meter --> 0.66671 Square Meter No Conversion Required
Section Modulus for Column: 13 Cubic Meter --> 13 Cubic Meter No Conversion Required
Effective Column Length: 200 Millimeter --> 0.2 Meter (Check conversion here)
Modulus of Elasticity of Column: 2 Megapascal --> 2000000 Pascal (Check conversion here)
Moment of Inertia: 0.000168 Kilogram Square Meter --> 0.000168 Kilogram Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

e = ((σ_max-(P/A_sectional))*S)/((P*sec(l_e*sqrt(P/(ε_column*I))))/2) --> ((60-(40/0.66671))*13)/((40*sec(0.2*sqrt(40/(2000000*0.000168))))/2)

Evaluating ... ...

e = 0.00252880230831189

STEP 3: Convert Result to Output's Unit

0.00252880230831189 Meter -->2.52880230831189 Millimeter (Check conversion here)

FINAL ANSWER

2.52880230831189 ≈ 2.528802 Millimeter <-- Eccentricity of Column

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Column And Struts » Mechanical » Columns With Eccentric Load » Eccentricity given Maximum Stress for Column with Eccentric Load

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Columns With Eccentric Load Calculators

Modulus of Elasticity given Deflection at Section of Column with Eccentric Load

LaTeX Go Modulus of Elasticity of Column = (Eccentric Load on Column/(Moment of Inertia*(((acos(1-(Deflection of Column/(Deflection of Free End+Eccentricity of Load))))/Distance b/w Fixed End and Deflection Point)^2)))

Eccentric Load given Deflection at Section of Column with Eccentric Load

LaTeX Go Eccentric Load on Column = (((acos(1-(Deflection of Column/(Deflection of Free End+Eccentricity of Load))))/Distance b/w Fixed End and Deflection Point)^2)*(Modulus of Elasticity of Column*Moment of Inertia)

Eccentricity given Moment at Section of Column with Eccentric Load

LaTeX Go Eccentricity of Column = (Moment of Force/Eccentric Load on Column)-Deflection of Free End+Deflection of Column

Moment at Section of Column with Eccentric Load

LaTeX Go Moment of Force = Eccentric Load on Column*(Deflection of Free End+Eccentricity of Load-Deflection of Column)

Eccentricity given Maximum Stress for Column with Eccentric Load Formula

LaTeX Go

What is buckling or crippling load?

Buckling Load is the highest load at which the column will buckle. Crippling load is the max load beyond that load, it cant use further it becomes disable to use.

How to Calculate Eccentricity given Maximum Stress for Column with Eccentric Load?

Eccentricity given Maximum Stress for Column with Eccentric Load calculator uses Eccentricity of Column = ((Maximum Stress at Crack Tip-(Eccentric Load on Column/Cross-Sectional Area of Column))*Section Modulus for Column)/((Eccentric Load on Column*sec(Effective Column Length*sqrt(Eccentric Load on Column/(Modulus of Elasticity of Column*Moment of Inertia))))/2) to calculate the Eccentricity of Column, Eccentricity given Maximum Stress for Column with Eccentric Load formula is defined as a measure of how much a column's load is offset from its central axis, which affects the column's ability to withstand stress and compression. It is a critical parameter in structural engineering to ensure the stability and safety of columns under eccentric loads. Eccentricity of Column is denoted by e symbol.

How to calculate Eccentricity given Maximum Stress for Column with Eccentric Load using this online calculator? To use this online calculator for Eccentricity given Maximum Stress for Column with Eccentric Load, enter Maximum Stress at Crack Tip (σ_max), Eccentric Load on Column (P), Cross-Sectional Area of Column (A_sectional), Section Modulus for Column (S), Effective Column Length (l_e), Modulus of Elasticity of Column (ε_column) & Moment of Inertia (I) and hit the calculate button. Here is how the Eccentricity given Maximum Stress for Column with Eccentric Load calculation can be explained with given input values -> 2E+7 = ((60-(40/0.66671))*13)/((40*sec(0.2*sqrt(40/(2000000*0.000168))))/2).

FAQ

What is Eccentricity given Maximum Stress for Column with Eccentric Load?

Eccentricity given Maximum Stress for Column with Eccentric Load formula is defined as a measure of how much a column's load is offset from its central axis, which affects the column's ability to withstand stress and compression. It is a critical parameter in structural engineering to ensure the stability and safety of columns under eccentric loads and is represented as e = ((σ_max-(P/A_sectional))*S)/((P*sec(l_e*sqrt(P/(ε_column*I))))/2) or Eccentricity of Column = ((Maximum Stress at Crack Tip-(Eccentric Load on Column/Cross-Sectional Area of Column))*Section Modulus for Column)/((Eccentric Load on Column*sec(Effective Column Length*sqrt(Eccentric Load on Column/(Modulus of Elasticity of Column*Moment of Inertia))))/2). Maximum stress at crack tip refers to the highest stress concentration that occurs at the very tip of a crack in a material, Eccentric load on column refers to a load that is applied at a point away from the centroidal axis of the column’s cross-section where loading introduces both axial stress and bending stress, Cross-sectional area of column is the area of the shape we get when we cut through the column perpendicular to its length, helps in determining the column’s ability to bear loads and resist stresses, Section modulus for column is a geometric property of a cross-section that measures the ability of a section to resist bending and is crucial for determining the bending stress in structural elements, Effective column length, often that represents the length of a column that influences its buckling behavior, Modulus of elasticity of column is a measure of a material’s stiffness or rigidity, is defined as the ratio of longitudinal stress to longitudinal strain within the elastic limit of a material & Moment of inertia also known as the rotational inertia or angular mass, is a measure of an object’s resistance to changes in its rotational motion around a specific axis.

How to calculate Eccentricity given Maximum Stress for Column with Eccentric Load?

Eccentricity given Maximum Stress for Column with Eccentric Load formula is defined as a measure of how much a column's load is offset from its central axis, which affects the column's ability to withstand stress and compression. It is a critical parameter in structural engineering to ensure the stability and safety of columns under eccentric loads is calculated using Eccentricity of Column = ((Maximum Stress at Crack Tip-(Eccentric Load on Column/Cross-Sectional Area of Column))*Section Modulus for Column)/((Eccentric Load on Column*sec(Effective Column Length*sqrt(Eccentric Load on Column/(Modulus of Elasticity of Column*Moment of Inertia))))/2). To calculate Eccentricity given Maximum Stress for Column with Eccentric Load, you need Maximum Stress at Crack Tip (σ_max), Eccentric Load on Column (P), Cross-Sectional Area of Column (A_sectional), Section Modulus for Column (S), Effective Column Length (l_e), Modulus of Elasticity of Column (ε_column) & Moment of Inertia (I). With our tool, you need to enter the respective value for Maximum Stress at Crack Tip, Eccentric Load on Column, Cross-Sectional Area of Column, Section Modulus for Column, Effective Column Length, Modulus of Elasticity of Column & Moment of Inertia and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Eccentricity of Column?

In this formula, Eccentricity of Column uses Maximum Stress at Crack Tip, Eccentric Load on Column, Cross-Sectional Area of Column, Section Modulus for Column, Effective Column Length, Modulus of Elasticity of Column & Moment of Inertia. We can use 2 other way(s) to calculate the same, which is/are as follows -

Eccentricity of Column = (Moment of Force/Eccentric Load on Column)-Deflection of Free End+Deflection of Column
Eccentricity of Column = (Deflection of Column/(1-cos(Distance b/w Fixed End and Deflection Point*sqrt(Eccentric Load on Column/(Modulus of Elasticity of Column*Moment of Inertia)))))-Deflection of Free End

Home

FREE PDFs

🔍 Search