Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity Solution

STEP 0: Pre-Calculation Summary
Formula Used
Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity
μviscosity = [g]*(ρd-ρf)*D^2/18*Vs
This formula uses 1 Constants, 5 Variables
Constants Used
[g] - Gravitational acceleration on Earth Value Taken As 9.80665
Variables Used
Dynamic Viscosity D - (Measured in Pascal Second) - The Dynamic Viscosity D refers to the property of a fluid that quantifies its internal resistance to flow when subjected to an external force or shear stress.
Mass Density - (Measured in Kilogram per Cubic Meter) - The Mass Density refers to the substance is its mass per unit volume.
Mass Density of Fluid - (Measured in Kilogram per Cubic Meter) - Mass Density of Fluid refers to the mass per unit volume of the fluid, typically expressed in kilograms per cubic meter (kg/m³).
Diameter - (Measured in Meter) - The Diameter refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.
STEP 1: Convert Input(s) to Base Unit
Mass Density: 1500 Kilogram per Cubic Meter --> 1500 Kilogram per Cubic Meter No Conversion Required
Mass Density of Fluid: 1000 Kilogram per Cubic Meter --> 1000 Kilogram per Cubic Meter No Conversion Required
Diameter: 0.06 Meter --> 0.06 Meter No Conversion Required
Settling Velocity: 1.5 Meter per Second --> 1.5 Meter per Second No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
μviscosity = [g]*(ρdf)*D^2/18*Vs --> [g]*(1500-1000)*0.06^2/18*1.5
Evaluating ... ...
μviscosity = 1.4709975
STEP 3: Convert Result to Output's Unit
1.4709975 Pascal Second -->14.709975 Poise (Check conversion ​here)
FINAL ANSWER
14.709975 14.70997 Poise <-- Dynamic Viscosity D
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has created this Calculator and 500+ more calculators!
Verifier Image
Verified by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has verified this Calculator and 500+ more calculators!

Dynamic Viscosity Calculators

Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity
​ LaTeX ​ Go Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity
Dynamic Viscosity given Particle Reynold's Number
​ LaTeX ​ Go Dynamic Viscosity D = Mass Density of Fluid*Settling Velocity*Diameter/Reynold Number
Dynamic Viscosity given Drag Force as per Stokes Law
​ LaTeX ​ Go Dynamic Viscosity D = Drag Force/pi*3*Settling Velocity*Diameter

Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity Formula

​LaTeX ​Go
Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity
μviscosity = [g]*(ρd-ρf)*D^2/18*Vs

What is Settling Viscosity?

Settling Viscosity refers to a particle in stationary air will settle under the action of gravity and reach a terminal velocity quite rapidly. The settling velocity also referred to as the “sedimentation velocity” is defined as the terminal velocity of a particle in still fluid.

How to Calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity?

Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity calculator uses Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity to calculate the Dynamic Viscosity D, The Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity formula is defined as the measure of a fluid's resistance to flow. It describes the internal friction between layers of fluid as they move past one another. The higher the dynamic viscosity, the more resistance the fluid has to flow. Dynamic Viscosity D is denoted by μviscosity symbol.

How to calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity using this online calculator? To use this online calculator for Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity, enter Mass Density d), Mass Density of Fluid f), Diameter (D) & Settling Velocity (Vs) and hit the calculate button. Here is how the Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity calculation can be explained with given input values -> 426.8835 = [g]*(1500-1000)*0.06^2/18*1.5.

FAQ

What is Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity?
The Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity formula is defined as the measure of a fluid's resistance to flow. It describes the internal friction between layers of fluid as they move past one another. The higher the dynamic viscosity, the more resistance the fluid has to flow and is represented as μviscosity = [g]*(ρdf)*D^2/18*Vs or Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity. The Mass Density refers to the substance is its mass per unit volume, Mass Density of Fluid refers to the mass per unit volume of the fluid, typically expressed in kilograms per cubic meter (kg/m³), The Diameter refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere & The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.
How to calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity?
The Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity formula is defined as the measure of a fluid's resistance to flow. It describes the internal friction between layers of fluid as they move past one another. The higher the dynamic viscosity, the more resistance the fluid has to flow is calculated using Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity. To calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity, you need Mass Density d), Mass Density of Fluid f), Diameter (D) & Settling Velocity (Vs). With our tool, you need to enter the respective value for Mass Density, Mass Density of Fluid, Diameter & Settling Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Dynamic Viscosity D?
In this formula, Dynamic Viscosity D uses Mass Density, Mass Density of Fluid, Diameter & Settling Velocity. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Dynamic Viscosity D = Mass Density of Fluid*Settling Velocity*Diameter/Reynold Number
  • Dynamic Viscosity D = Drag Force/pi*3*Settling Velocity*Diameter
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!