Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity Calculator

✖The Mass Density refers to the substance is its mass per unit volume.ⓘ Mass Density [ρ_d]			+10% -10%
✖Mass Density of Fluid refers to the mass per unit volume of the fluid, typically expressed in kilograms per cubic meter (kg/m³).ⓘ Mass Density of Fluid [ρ_f]			+10% -10%
✖The Diameter refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere.ⓘ Diameter [D]			+10% -10%
✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%

✖The Dynamic Viscosity D refers to the property of a fluid that quantifies its internal resistance to flow when subjected to an external force or shear stress.ⓘ Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity [μ_viscosity]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity
μ_viscosity = [g]*(ρ_d-ρ_f)*D^2/18*V_s
This formula uses 1 Constants, 5 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Dynamic Viscosity D - (Measured in Pascal Second) - The Dynamic Viscosity D refers to the property of a fluid that quantifies its internal resistance to flow when subjected to an external force or shear stress.
Mass Density - (Measured in Kilogram per Cubic Meter) - The Mass Density refers to the substance is its mass per unit volume.
Mass Density of Fluid - (Measured in Kilogram per Cubic Meter) - Mass Density of Fluid refers to the mass per unit volume of the fluid, typically expressed in kilograms per cubic meter (kg/m³).
Diameter - (Measured in Meter) - The Diameter refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

STEP 1: Convert Input(s) to Base Unit

Mass Density: 1500 Kilogram per Cubic Meter --> 1500 Kilogram per Cubic Meter No Conversion Required
Mass Density of Fluid: 1000 Kilogram per Cubic Meter --> 1000 Kilogram per Cubic Meter No Conversion Required
Diameter: 0.06 Meter --> 0.06 Meter No Conversion Required
Settling Velocity: 1.5 Meter per Second --> 1.5 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

μ_viscosity = [g]*(ρ_d-ρ_f)*D^2/18*V_s --> [g]*(1500-1000)*0.06^2/18*1.5

Evaluating ... ...

μ_viscosity = 1.4709975

STEP 3: Convert Result to Output's Unit

1.4709975 Pascal Second -->14.709975 Poise (Check conversion here)

FINAL ANSWER

14.709975 ≈ 14.70997 Poise <-- Dynamic Viscosity D

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Viscosity » Dynamic Viscosity » Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Dynamic Viscosity Calculators

Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity

LaTeX Go Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity

Dynamic Viscosity given Particle Reynold's Number

LaTeX Go Dynamic Viscosity D = Mass Density of Fluid*Settling Velocity*Diameter/Reynold Number

Dynamic Viscosity given Drag Force as per Stokes Law

LaTeX Go Dynamic Viscosity D = Drag Force/pi*3*Settling Velocity*Diameter

Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity Formula

LaTeX Go

Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity
μ_viscosity = [g]*(ρ_d-ρ_f)*D^2/18*V_s

What is Settling Viscosity?

Settling Viscosity refers to a particle in stationary air will settle under the action of gravity and reach a terminal velocity quite rapidly. The settling velocity also referred to as the “sedimentation velocity” is defined as the terminal velocity of a particle in still fluid.

How to Calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity?

Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity calculator uses Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity to calculate the Dynamic Viscosity D, The Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity formula is defined as the measure of a fluid's resistance to flow. It describes the internal friction between layers of fluid as they move past one another. The higher the dynamic viscosity, the more resistance the fluid has to flow. Dynamic Viscosity D is denoted by μ_viscosity symbol.

How to calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity using this online calculator? To use this online calculator for Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity, enter Mass Density (ρ_d), Mass Density of Fluid (ρ_f), Diameter (D) & Settling Velocity (V_s) and hit the calculate button. Here is how the Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity calculation can be explained with given input values -> 426.8835 = [g]*(1500-1000)*0.06^2/18*1.5.

FAQ

What is Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity?

The Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity formula is defined as the measure of a fluid's resistance to flow. It describes the internal friction between layers of fluid as they move past one another. The higher the dynamic viscosity, the more resistance the fluid has to flow and is represented as μ_viscosity = [g]*(ρ_d-ρ_f)*D^2/18*V_s or Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity. The Mass Density refers to the substance is its mass per unit volume, Mass Density of Fluid refers to the mass per unit volume of the fluid, typically expressed in kilograms per cubic meter (kg/m³), The Diameter refers to straight line passing from side to side through the center of a body or figure, especially a circle or sphere & The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

How to calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity?

The Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity formula is defined as the measure of a fluid's resistance to flow. It describes the internal friction between layers of fluid as they move past one another. The higher the dynamic viscosity, the more resistance the fluid has to flow is calculated using Dynamic Viscosity D = [g]*(Mass Density-Mass Density of Fluid)*Diameter^2/18*Settling Velocity. To calculate Dynamic Viscosity for Settling Velocity with respect to Dynamic Viscosity, you need Mass Density (ρ_d), Mass Density of Fluid (ρ_f), Diameter (D) & Settling Velocity (V_s). With our tool, you need to enter the respective value for Mass Density, Mass Density of Fluid, Diameter & Settling Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Dynamic Viscosity D?

In this formula, Dynamic Viscosity D uses Mass Density, Mass Density of Fluid, Diameter & Settling Velocity. We can use 2 other way(s) to calculate the same, which is/are as follows -

Dynamic Viscosity D = Mass Density of Fluid*Settling Velocity*Diameter/Reynold Number
Dynamic Viscosity D = Drag Force/pi*3*Settling Velocity*Diameter

Home

FREE PDFs

🔍 Search