Dynamic Viscosity when Reynold's Number is Unity Calculator

✖The Mass Density of a substance is its mass per unit volume.ⓘ Mass Density [ρ]			+10% -10%
✖Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer.ⓘ Flow Velocity for Unconfined Aquifer [V_f]			+10% -10%
✖Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.ⓘ Diameter for Unconfined Aquifer [D]			+10% -10%

✖Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied.ⓘ Dynamic Viscosity when Reynold's Number is Unity [μ_viscosity]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Unconfined Aquifer Formulas PDF PDF Image

Dynamic Viscosity when Reynold's Number is Unity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dynamic Viscosity for Aquifer = Mass Density*Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer
μ_viscosity = ρ*V_f*D
This formula uses 4 Variables

Variables Used

Dynamic Viscosity for Aquifer - (Measured in Poise) - Dynamic Viscosity for Aquifer of a fluid is the measure of its resistance to flow when an external force is applied.
Mass Density - (Measured in Kilogram per Cubic Meter) - The Mass Density of a substance is its mass per unit volume.
Flow Velocity for Unconfined Aquifer - (Measured in Meter per Second) - Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer.
Diameter for Unconfined Aquifer - (Measured in Meter) - Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.

STEP 1: Convert Input(s) to Base Unit

Mass Density: 997 Kilogram per Cubic Meter --> 997 Kilogram per Cubic Meter No Conversion Required
Flow Velocity for Unconfined Aquifer: 0.01 Meter per Second --> 0.01 Meter per Second No Conversion Required
Diameter for Unconfined Aquifer: 0.02 Meter --> 0.02 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

μ_viscosity = ρ*V_f*D --> 997*0.01*0.02

Evaluating ... ...

μ_viscosity = 0.1994

STEP 3: Convert Result to Output's Unit

0.01994 Pascal Second -->0.1994 Poise (Check conversion here)

FINAL ANSWER

0.1994 Poise <-- Dynamic Viscosity for Aquifer

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Well Hydraulics » Unconfined Aquifer » Radial Distance and Radius of well » Dynamic Viscosity when Reynold's Number is Unity

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Radial Distance and Radius of well Calculators

Radial Distance of Well 2 based on Discharge of Two Wells under Consideration

LaTeX Go Radial Distance at Well 2 = Radial Distance at Observation Well 1*exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of Well based on Discharge in Unconfined Aquifer

LaTeX Go Radius of Well given Discharge = Radius of Influence/exp((pi*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Radial Distance of Well 1 based on Discharge of Two Wells under Consideration

LaTeX Go Radial Distance 1 = Radial Distance at Observation Well 2/exp((pi*Coefficient of Permeability of Soil Particle*(Depth of Water 2^2-Depth of Water 1^2))/Discharge)

Radius of Well based on Discharge in Unconfined Aquifer with Base 10

LaTeX Go Radius of Well given Discharge = Radius of Influence/10^((1.36*Coefficient of Permeability of Soil Particle*(Initial Aquifer Thickness^2-Depth of Water^2))/Discharge)

Dynamic Viscosity when Reynold's Number is Unity Formula

LaTeX Go

Dynamic Viscosity for Aquifer = Mass Density*Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer
μ_viscosity = ρ*V_f*D

What is Dynamic Viscosity?

Dynamic viscosity (also known as absolute viscosity) is the measurement of the fluid's internal resistance to flow while kinematic viscosity refers to the ratio of dynamic viscosity to density.

How to Calculate Dynamic Viscosity when Reynold's Number is Unity?

Dynamic Viscosity when Reynold's Number is Unity calculator uses Dynamic Viscosity for Aquifer = Mass Density*Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer to calculate the Dynamic Viscosity for Aquifer, The Dynamic Viscosity when Reynold's Number is Unity formula is defined as the calculation of the value of dynamic viscosity when we have Reynold's Number is equal to one. Dynamic Viscosity for Aquifer is denoted by μ_viscosity symbol.

How to calculate Dynamic Viscosity when Reynold's Number is Unity using this online calculator? To use this online calculator for Dynamic Viscosity when Reynold's Number is Unity, enter Mass Density (ρ), Flow Velocity for Unconfined Aquifer (V_f) & Diameter for Unconfined Aquifer (D) and hit the calculate button. Here is how the Dynamic Viscosity when Reynold's Number is Unity calculation can be explained with given input values -> 1.994 = 997*0.01*0.02.

FAQ

What is Dynamic Viscosity when Reynold's Number is Unity?

The Dynamic Viscosity when Reynold's Number is Unity formula is defined as the calculation of the value of dynamic viscosity when we have Reynold's Number is equal to one and is represented as μ_viscosity = ρ*V_f*D or Dynamic Viscosity for Aquifer = Mass Density*Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer. The Mass Density of a substance is its mass per unit volume, Flow Velocity for Unconfined Aquifer is the velocity of groundwater flow which is proportional to the magnitude of the hydraulic gradient and the hydraulic conductivity of the aquifer & Diameter for Unconfined Aquifer is a straight line passing from side to side through the center of a body or figure, especially a circle or sphere.

How to calculate Dynamic Viscosity when Reynold's Number is Unity?

The Dynamic Viscosity when Reynold's Number is Unity formula is defined as the calculation of the value of dynamic viscosity when we have Reynold's Number is equal to one is calculated using Dynamic Viscosity for Aquifer = Mass Density*Flow Velocity for Unconfined Aquifer*Diameter for Unconfined Aquifer. To calculate Dynamic Viscosity when Reynold's Number is Unity, you need Mass Density (ρ), Flow Velocity for Unconfined Aquifer (V_f) & Diameter for Unconfined Aquifer (D). With our tool, you need to enter the respective value for Mass Density, Flow Velocity for Unconfined Aquifer & Diameter for Unconfined Aquifer and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search