LCM of two numbers

Dynamic Viscosity for Total Force in piston Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Hydraulics and Waterworks Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Laminar Flow Buoyancy And Floatation Culverts Dams More >>

⤿

Dash Pot Mechanism Laminar Flow around a Sphere Stokes’ Law Laminar Flow between Parallel Flat Plates, one plate moving and other at rest, Couette Flow Laminar Flow between Parallel Plates, both Plates at Rest More >>

⤿

When Piston Velocity is Negligible to Average Velocity of Oil in Clearance Space Dynamic Viscosity Velocity of Piston

⤿

When Shear Force is Negligible

✖The Total Force in Piston is the sum of pressure forces acting on its surface due to the fluid flow.ⓘ Total Force in Piston [F_Total]			+10% -10%
✖Velocity of piston in reciprocating pump is defined as the product of sin of angular velocity and time, radius of crank and angular velocity.ⓘ Velocity of Piston [v_piston]			+10% -10%
✖Piston Length is how far the piston travels in the cylinder, which is determined by the cranks on the crankshaft. length.ⓘ Piston Length [L_P]			+10% -10%
✖Diameter of Piston is the actual diameter of the piston while the bore is the size of the cylinder and will always be larger than the piston.ⓘ Diameter of Piston [D]			+10% -10%
✖Radial Clearance or gap is the distance between two surfaces adjacent to each other.ⓘ Radial Clearance [C_R]			+10% -10%

✖The Dynamic Viscosity refers to the internal resistance of a fluid to flow when a force is applied.ⓘ Dynamic Viscosity for Total Force in piston [μ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Dash Pot Mechanism Formulas PDF PDF Image

Dynamic Viscosity for Total Force in piston Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dynamic Viscosity = Total Force in Piston/(0.75*pi*Velocity of Piston*Piston Length*((Diameter of Piston/Radial Clearance)^3))
μ = F_Total/(0.75*pi*v_piston*L_P*((D/C_R)^3))
This formula uses 1 Constants, 6 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Dynamic Viscosity - (Measured in Pascal Second) - The Dynamic Viscosity refers to the internal resistance of a fluid to flow when a force is applied.
Total Force in Piston - (Measured in Newton) - The Total Force in Piston is the sum of pressure forces acting on its surface due to the fluid flow.
Velocity of Piston - (Measured in Meter per Second) - Velocity of piston in reciprocating pump is defined as the product of sin of angular velocity and time, radius of crank and angular velocity.
Piston Length - (Measured in Meter) - Piston Length is how far the piston travels in the cylinder, which is determined by the cranks on the crankshaft. length.
Diameter of Piston - (Measured in Meter) - Diameter of Piston is the actual diameter of the piston while the bore is the size of the cylinder and will always be larger than the piston.
Radial Clearance - (Measured in Meter) - Radial Clearance or gap is the distance between two surfaces adjacent to each other.

STEP 1: Convert Input(s) to Base Unit

Total Force in Piston: 2.5 Newton --> 2.5 Newton No Conversion Required
Velocity of Piston: 0.045 Meter per Second --> 0.045 Meter per Second No Conversion Required
Piston Length: 5 Meter --> 5 Meter No Conversion Required
Diameter of Piston: 3.5 Meter --> 3.5 Meter No Conversion Required
Radial Clearance: 0.45 Meter --> 0.45 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

μ = F_Total/(0.75*pi*v_piston*L_P*((D/C_R)^3)) --> 2.5/(0.75*pi*0.045*5*((3.5/0.45)^3))

Evaluating ... ...

μ = 0.0100225853375654

STEP 3: Convert Result to Output's Unit

0.0100225853375654 Pascal Second -->0.100225853375654 Poise (Check conversion here)

FINAL ANSWER

0.100225853375654 ≈ 0.100226 Poise <-- Dynamic Viscosity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Laminar Flow » Dash Pot Mechanism » When Piston Velocity is Negligible to Average Velocity of Oil in Clearance Space » When Shear Force is Negligible » Dynamic Viscosity for Total Force in piston

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< When Shear Force is Negligible Calculators

Dynamic Viscosity for Total Force in piston

LaTeX Go Dynamic Viscosity = Total Force in Piston/(0.75*pi*Velocity of Piston*Piston Length*((Diameter of Piston/Radial Clearance)^3))

Length of Piston for Total Force in Piston

LaTeX Go Piston Length = Total Force in Piston/(0.75*pi*Dynamic Viscosity*Velocity of Piston*((Diameter of Piston/Radial Clearance)^3))

Dynamic Viscosity for Total Force in piston Formula

LaTeX Go

Dynamic Viscosity = Total Force in Piston/(0.75*pi*Velocity of Piston*Piston Length*((Diameter of Piston/Radial Clearance)^3))
μ = F_Total/(0.75*pi*v_piston*L_P*((D/C_R)^3))

What is Dynamic Viscosity?

The dynamic viscosity η (η = "eta") is a measure of the viscosity of a fluid (fluid: liquid, flowing substance). The higher the viscosity, the thicker (less liquid) the fluid; the lower the viscosity, the thinner (more liquid) it is.

How to Calculate Dynamic Viscosity for Total Force in piston?

Dynamic Viscosity for Total Force in piston calculator uses Dynamic Viscosity = Total Force in Piston/(0.75*pi*Velocity of Piston*Piston Length*((Diameter of Piston/Radial Clearance)^3)) to calculate the Dynamic Viscosity, The Dynamic Viscosity for Total Force in piston is defined as the resistance developed due to viscous flow in the oil tank. Dynamic Viscosity is denoted by μ symbol.

How to calculate Dynamic Viscosity for Total Force in piston using this online calculator? To use this online calculator for Dynamic Viscosity for Total Force in piston, enter Total Force in Piston (F_Total), Velocity of Piston (v_piston), Piston Length (L_P), Diameter of Piston (D) & Radial Clearance (C_R) and hit the calculate button. Here is how the Dynamic Viscosity for Total Force in piston calculation can be explained with given input values -> 1.002259 = 2.5/(0.75*pi*0.045*5*((3.5/0.45)^3)).

FAQ

What is Dynamic Viscosity for Total Force in piston?

The Dynamic Viscosity for Total Force in piston is defined as the resistance developed due to viscous flow in the oil tank and is represented as μ = F_Total/(0.75*pi*v_piston*L_P*((D/C_R)^3)) or Dynamic Viscosity = Total Force in Piston/(0.75*pi*Velocity of Piston*Piston Length*((Diameter of Piston/Radial Clearance)^3)). The Total Force in Piston is the sum of pressure forces acting on its surface due to the fluid flow, Velocity of piston in reciprocating pump is defined as the product of sin of angular velocity and time, radius of crank and angular velocity, Piston Length is how far the piston travels in the cylinder, which is determined by the cranks on the crankshaft. length, Diameter of Piston is the actual diameter of the piston while the bore is the size of the cylinder and will always be larger than the piston & Radial Clearance or gap is the distance between two surfaces adjacent to each other.

How to calculate Dynamic Viscosity for Total Force in piston?

The Dynamic Viscosity for Total Force in piston is defined as the resistance developed due to viscous flow in the oil tank is calculated using Dynamic Viscosity = Total Force in Piston/(0.75*pi*Velocity of Piston*Piston Length*((Diameter of Piston/Radial Clearance)^3)). To calculate Dynamic Viscosity for Total Force in piston, you need Total Force in Piston (F_Total), Velocity of Piston (v_piston), Piston Length (L_P), Diameter of Piston (D) & Radial Clearance (C_R). With our tool, you need to enter the respective value for Total Force in Piston, Velocity of Piston, Piston Length, Diameter of Piston & Radial Clearance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search