Dynamic Viscosity given Power Requirement for Flocculation Calculator

✖Power Requirement refers to the amount of energy needed to operate various processes, systems, or equipment involved in environmental management.ⓘ Power Requirement [P]			+10% -10%
✖Mean Velocity Gradient refers to the rate of change of velocity within a fluid over a specified distance or depth.ⓘ Mean Velocity Gradient [G]			+10% -10%
✖Volume of Tank refers to the total capacity or size of a tank used for storing liquids, such as water, chemicals, or wastewater.ⓘ Volume of Tank [V]			+10% -10%

✖Dynamic Viscosity refers to a measure of a fluid's resistance to flow under an applied force or shear stress.ⓘ Dynamic Viscosity given Power Requirement for Flocculation [μ_viscosity]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Rapid Mix Basin and Flocculation Basin Formulas PDF PDF Image

Dynamic Viscosity given Power Requirement for Flocculation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dynamic Viscosity = (Power Requirement/((Mean Velocity Gradient)^2*Volume of Tank))
μ_viscosity = (P/((G)^2*V))
This formula uses 4 Variables

Variables Used

Dynamic Viscosity - (Measured in Pascal Second) - Dynamic Viscosity refers to a measure of a fluid's resistance to flow under an applied force or shear stress.
Power Requirement - (Measured in Watt) - Power Requirement refers to the amount of energy needed to operate various processes, systems, or equipment involved in environmental management.
Mean Velocity Gradient - (Measured in 1 Per Second) - Mean Velocity Gradient refers to the rate of change of velocity within a fluid over a specified distance or depth.
Volume of Tank - (Measured in Cubic Meter) - Volume of Tank refers to the total capacity or size of a tank used for storing liquids, such as water, chemicals, or wastewater.

STEP 1: Convert Input(s) to Base Unit

Power Requirement: 3 Kilojoule per Second --> 3000 Watt (Check conversion here)
Mean Velocity Gradient: 2 1 Per Second --> 2 1 Per Second No Conversion Required
Volume of Tank: 9 Cubic Meter --> 9 Cubic Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

μ_viscosity = (P/((G)^2*V)) --> (3000/((2)^2*9))

Evaluating ... ...

μ_viscosity = 83.3333333333333

STEP 3: Convert Result to Output's Unit

83.3333333333333 Pascal Second -->833.333333333333 Poise (Check conversion here)

FINAL ANSWER

833.333333333333 ≈ 833.3333 Poise <-- Dynamic Viscosity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of Rapid Mix Basin and Flocculation Basin » Dynamic Viscosity given Power Requirement for Flocculation

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Design of Rapid Mix Basin and Flocculation Basin Calculators

Mean Velocity Gradient given Power Requirement

LaTeX Go Mean Velocity Gradient = sqrt(Power Requirement/(Dynamic Viscosity*Volume of Tank))

Hydraulic Retention Time given Volume of Rapid Mix Basin

LaTeX Go Hydraulic Retention Time in Seconds = Volume of Rapid Mix Basin/Francis Discharge with Suppressed End

Wastewater Flow given Volume of Rapid Mix Basin

LaTeX Go Waste Water Flow = Volume of Rapid Mix Basin/Hydraulic Retention Time

Volume of Rapid Mix Basin

LaTeX Go Volume of Rapid Mix Basin = Hydraulic Retention Time*Waste Water Flow

Dynamic Viscosity given Power Requirement for Flocculation Formula

LaTeX Go

Dynamic Viscosity = (Power Requirement/((Mean Velocity Gradient)^2*Volume of Tank))
μ_viscosity = (P/((G)^2*V))

What is Dynamic Viscosity?

Dynamic Viscosity (also known as absolute viscosity) is the measurement of the fluid 's internal resistance to flow while kinematic viscosity refers to the ratio of dynamic viscosity to density.

How to Calculate Dynamic Viscosity given Power Requirement for Flocculation?

Dynamic Viscosity given Power Requirement for Flocculation calculator uses Dynamic Viscosity = (Power Requirement/((Mean Velocity Gradient)^2*Volume of Tank)) to calculate the Dynamic Viscosity, The Dynamic Viscosity given Power Requirement for Flocculation is defined as the relationship of dynamic viscosity with power requirement to analyze fluid behavior in various systems, such as wastewater treatment plants, water distribution networks, or environmental fluid dynamics studies. Dynamic Viscosity is denoted by μ_viscosity symbol.

How to calculate Dynamic Viscosity given Power Requirement for Flocculation using this online calculator? To use this online calculator for Dynamic Viscosity given Power Requirement for Flocculation, enter Power Requirement (P), Mean Velocity Gradient (G) & Volume of Tank (V) and hit the calculate button. Here is how the Dynamic Viscosity given Power Requirement for Flocculation calculation can be explained with given input values -> 8333.333 = (3000/((2)^2*9)).

FAQ

What is Dynamic Viscosity given Power Requirement for Flocculation?

The Dynamic Viscosity given Power Requirement for Flocculation is defined as the relationship of dynamic viscosity with power requirement to analyze fluid behavior in various systems, such as wastewater treatment plants, water distribution networks, or environmental fluid dynamics studies and is represented as μ_viscosity = (P/((G)^2*V)) or Dynamic Viscosity = (Power Requirement/((Mean Velocity Gradient)^2*Volume of Tank)). Power Requirement refers to the amount of energy needed to operate various processes, systems, or equipment involved in environmental management, Mean Velocity Gradient refers to the rate of change of velocity within a fluid over a specified distance or depth & Volume of Tank refers to the total capacity or size of a tank used for storing liquids, such as water, chemicals, or wastewater.

How to calculate Dynamic Viscosity given Power Requirement for Flocculation?

The Dynamic Viscosity given Power Requirement for Flocculation is defined as the relationship of dynamic viscosity with power requirement to analyze fluid behavior in various systems, such as wastewater treatment plants, water distribution networks, or environmental fluid dynamics studies is calculated using Dynamic Viscosity = (Power Requirement/((Mean Velocity Gradient)^2*Volume of Tank)). To calculate Dynamic Viscosity given Power Requirement for Flocculation, you need Power Requirement (P), Mean Velocity Gradient (G) & Volume of Tank (V). With our tool, you need to enter the respective value for Power Requirement, Mean Velocity Gradient & Volume of Tank and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Dynamic Viscosity?

In this formula, Dynamic Viscosity uses Power Requirement, Mean Velocity Gradient & Volume of Tank. We can use 2 other way(s) to calculate the same, which is/are as follows -

Dynamic Viscosity = (Power Requirement/((Mean Velocity Gradient)^2*Volume of Tank))
Dynamic Viscosity = (Power Requirement/((Mean Velocity Gradient)^2*Volume of Tank))

Home

FREE PDFs

🔍 Search