Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period Calculator

✖The Dry Weight of Solid is the weight of dry solid present in the system in the drying mass transfer operation.ⓘ Dry Weight of Solid [W_S]			+10% -10%
✖The Initial Moisture Content for Constant Rate Period is defined as the ratio of the weight of moisture to the weight of dry solid present initially in the wet solid for drying operation.ⓘ Initial Moisture Content for Constant Rate Period [X_i(Constant)]			+10% -10%
✖The Critical Moisture Content is the ratio of amount of moisture present in the solids at the transition of constant and falling rate period to that of the weight of dry solid.ⓘ Critical Moisture Content [X_c]			+10% -10%
✖The Constant Rate Drying Time is the time taken for drying operation in the constant rate period.ⓘ Constant Rate Drying Time [t_c]			+10% -10%
✖The Rate of Constant Drying Period is the rate of drying that takes place for a given set of drying conditions in the constant rate period.ⓘ Rate of Constant Drying Period [N_c]			+10% -10%

✖The Drying Surface Area is the total area in the drying mass transfer operation i.e. exposed in contact with the drying medium.ⓘ Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period [A]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Drying Formula PDF PDF Image

Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period Solution

STEP 0: Pre-Calculation Summary

Formula Used

Drying Surface Area = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Critical Moisture Content)/(Constant Rate Drying Time*Rate of Constant Drying Period)
A = W_S*(X_i(Constant)-X_c)/(t_c*N_c)
This formula uses 6 Variables

Variables Used

Drying Surface Area - (Measured in Square Meter) - The Drying Surface Area is the total area in the drying mass transfer operation i.e. exposed in contact with the drying medium.
Dry Weight of Solid - (Measured in Kilogram) - The Dry Weight of Solid is the weight of dry solid present in the system in the drying mass transfer operation.
Initial Moisture Content for Constant Rate Period - The Initial Moisture Content for Constant Rate Period is defined as the ratio of the weight of moisture to the weight of dry solid present initially in the wet solid for drying operation.
Critical Moisture Content - The Critical Moisture Content is the ratio of amount of moisture present in the solids at the transition of constant and falling rate period to that of the weight of dry solid.
Constant Rate Drying Time - (Measured in Second) - The Constant Rate Drying Time is the time taken for drying operation in the constant rate period.
Rate of Constant Drying Period - (Measured in Kilogram per Second per Square Meter) - The Rate of Constant Drying Period is the rate of drying that takes place for a given set of drying conditions in the constant rate period.

STEP 1: Convert Input(s) to Base Unit

Dry Weight of Solid: 100 Kilogram --> 100 Kilogram No Conversion Required
Initial Moisture Content for Constant Rate Period: 0.49 --> No Conversion Required
Critical Moisture Content: 0.11 --> No Conversion Required
Constant Rate Drying Time: 190 Second --> 190 Second No Conversion Required
Rate of Constant Drying Period: 2 Kilogram per Second per Square Meter --> 2 Kilogram per Second per Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A = W_S*(X_i(Constant)-X_c)/(t_c*N_c) --> 100*(0.49-0.11)/(190*2)

Evaluating ... ...

A = 0.1

STEP 3: Convert Result to Output's Unit

0.1 Square Meter --> No Conversion Required

FINAL ANSWER

0.1 Square Meter <-- Drying Surface Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Mass Transfer Operations » Drying » Constant Rate Period Drying » Drying from Initial to Critical Moisture » Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period

Credits

Created by Vaibhav Mishra

DJ Sanghvi College of Engineering (DJSCE), Mumbai

Vaibhav Mishra has created this Calculator and 300+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Drying from Initial to Critical Moisture Calculators

Constant Drying Time from Initial to Critical Moisture Content

LaTeX Go Constant Rate Drying Time = Dry Weight of Solid*((Initial Moisture Content for Constant Rate Period-Critical Moisture Content))/((Drying Surface Area*Rate of Constant Drying Period))

Rate of Constant Drying Period based on Critical Moisture Content

LaTeX Go Rate of Constant Drying Period = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Critical Moisture Content)/(Drying Surface Area*Constant Rate Drying Time)

Rate of Constant Drying Period based on Critical Weight of Moisture

LaTeX Go Rate of Constant Drying Period = (Initial Weight of Moisture for Constant Rate-Critical Weight of Moisture)/(Drying Surface Area*Constant Rate Drying Time)

Constant Drying Time from Initial to Critical Weight of Moisture

LaTeX Go Constant Rate Drying Time = (Initial Weight of Moisture for Constant Rate-Critical Weight of Moisture)/(Drying Surface Area*Rate of Constant Drying Period)

< Important Formulas in Drying Mass Transfer Operation Calculators

Constant Drying Time from Initial to Critical Moisture Content

LaTeX Go Constant Rate Drying Time = Dry Weight of Solid*((Initial Moisture Content for Constant Rate Period-Critical Moisture Content))/((Drying Surface Area*Rate of Constant Drying Period))

Critical Moisture Content based on Initial Moisture Content for Constant Rate Period

LaTeX Go Critical Moisture Content = Initial Moisture Content for Constant Rate Period-((Drying Surface Area*Constant Rate Drying Time*Rate of Constant Drying Period)/Dry Weight of Solid)

Constant Drying Time from Initial to Critical Weight of Moisture

LaTeX Go Constant Rate Drying Time = (Initial Weight of Moisture for Constant Rate-Critical Weight of Moisture)/(Drying Surface Area*Rate of Constant Drying Period)

Total Drying Time based on Constant Drying Time and Falling Drying Time

LaTeX Go Total Drying Time = Constant Rate Drying Time+Falling Rate Drying Time

Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period Formula

LaTeX Go

What is Constant Rate Drying Period?

The constant rate drying period is a stage in the drying process where the rate of moisture removal from the material is constant and is determined by the drying conditions, such as temperature, humidity, and airflow. During this period, the moisture on the surface of the material is rapidly removed, resulting in a steep decline in the moisture content of the material.

How to Calculate Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period?

Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period calculator uses Drying Surface Area = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Critical Moisture Content)/(Constant Rate Drying Time*Rate of Constant Drying Period) to calculate the Drying Surface Area, The Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period formula is defined as the drying surface required to attain the drying from initial to critical moisture content in the Constant Rate Drying Period. Drying Surface Area is denoted by A symbol.

How to calculate Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period using this online calculator? To use this online calculator for Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period, enter Dry Weight of Solid (W_S), Initial Moisture Content for Constant Rate Period (X_i(Constant)), Critical Moisture Content (X_c), Constant Rate Drying Time (t_c) & Rate of Constant Drying Period (N_c) and hit the calculate button. Here is how the Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period calculation can be explained with given input values -> 0.1 = 100*(0.49-0.11)/(190*2).

FAQ

What is Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period?

The Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period formula is defined as the drying surface required to attain the drying from initial to critical moisture content in the Constant Rate Drying Period and is represented as A = W_S*(X_i(Constant)-X_c)/(t_c*N_c) or Drying Surface Area = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Critical Moisture Content)/(Constant Rate Drying Time*Rate of Constant Drying Period). The Dry Weight of Solid is the weight of dry solid present in the system in the drying mass transfer operation, The Initial Moisture Content for Constant Rate Period is defined as the ratio of the weight of moisture to the weight of dry solid present initially in the wet solid for drying operation, The Critical Moisture Content is the ratio of amount of moisture present in the solids at the transition of constant and falling rate period to that of the weight of dry solid, The Constant Rate Drying Time is the time taken for drying operation in the constant rate period & The Rate of Constant Drying Period is the rate of drying that takes place for a given set of drying conditions in the constant rate period.

How to calculate Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period?

The Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period formula is defined as the drying surface required to attain the drying from initial to critical moisture content in the Constant Rate Drying Period is calculated using Drying Surface Area = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Critical Moisture Content)/(Constant Rate Drying Time*Rate of Constant Drying Period). To calculate Drying Surface Area based on Initial to Critical Moisture Content for Constant Rate Period, you need Dry Weight of Solid (W_S), Initial Moisture Content for Constant Rate Period (X_i(Constant)), Critical Moisture Content (X_c), Constant Rate Drying Time (t_c) & Rate of Constant Drying Period (N_c). With our tool, you need to enter the respective value for Dry Weight of Solid, Initial Moisture Content for Constant Rate Period, Critical Moisture Content, Constant Rate Drying Time & Rate of Constant Drying Period and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Drying Surface Area?

In this formula, Drying Surface Area uses Dry Weight of Solid, Initial Moisture Content for Constant Rate Period, Critical Moisture Content, Constant Rate Drying Time & Rate of Constant Drying Period. We can use 3 other way(s) to calculate the same, which is/are as follows -

Drying Surface Area = (Initial Weight of Moisture for Constant Rate-Critical Weight of Moisture)/(Constant Rate Drying Time*Rate of Constant Drying Period)
Drying Surface Area = (Initial Weight of Moisture for Constant Rate-Critical Weight of Moisture)/(Constant Rate Drying Time*Rate of Constant Drying Period)
Drying Surface Area = Dry Weight of Solid*(Initial Moisture Content for Constant Rate Period-Final Moisture Content for Constant Rate Period)/(Constant Rate Drying Time*Rate of Constant Drying Period)

Home

FREE PDFs

🔍 Search