Driver Sight Height given Angle Grades Calculator

✖Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road.ⓘ Sight Distance [S]			+10% -10%
✖Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave.ⓘ Length of Curve [L_s]			+10% -10%
✖The Height of The Obstruction refers to its vertical dimension, blocking a line of sight or path, often in transportation, construction or safety.ⓘ The Height of The Obstruction [h₂]			+10% -10%
✖A negative grade angle indicates an incline slope.ⓘ Negative Grade Angle [n₂]			+10% -10%
✖A positive grade angle indicates an upward slope.ⓘ Positive Grade Angle [n₁]			+10% -10%

✖Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle.ⓘ Driver Sight Height given Angle Grades [h₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Vertical alignment Formula PDF PDF Image

Driver Sight Height given Angle Grades Solution

STEP 0: Pre-Calculation Summary

Formula Used

Driver Sight Height = (Sight Distance-Length of Curve/2-The Height of The Obstruction/Negative Grade Angle)*Positive Grade Angle
h₁ = (S-L_s/2-h₂/n₂)*n₁
This formula uses 6 Variables

Variables Used

Driver Sight Height - (Measured in Meter) - Driver Sight Height refers to the vertical distance between the driver's eye level and the road surface while seated in a vehicle.
Sight Distance - (Measured in Meter) - Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road.
Length of Curve - (Measured in Meter) - Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave.
The Height of The Obstruction - (Measured in Meter) - The Height of The Obstruction refers to its vertical dimension, blocking a line of sight or path, often in transportation, construction or safety.
Negative Grade Angle - A negative grade angle indicates an incline slope.
Positive Grade Angle - (Measured in Radian) - A positive grade angle indicates an upward slope.

STEP 1: Convert Input(s) to Base Unit

Sight Distance: 4.536929 Meter --> 4.536929 Meter No Conversion Required
Length of Curve: 8.953859 Meter --> 8.953859 Meter No Conversion Required
The Height of The Obstruction: 0.36 Meter --> 0.36 Meter No Conversion Required
Negative Grade Angle: -0.402266 --> No Conversion Required
Positive Grade Angle: 45 Degree --> 0.785398163397301 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h₁ = (S-L_s/2-h₂/n₂)*n₁ --> (4.536929-8.953859/2-0.36/(-0.402266))*0.785398163397301

Evaluating ... ...

h₁ = 0.750000048498681

STEP 3: Convert Result to Output's Unit

0.750000048498681 Meter --> No Conversion Required

FINAL ANSWER

0.750000048498681 ≈ 0.75 Meter <-- Driver Sight Height

(Calculation completed in 00.021 seconds)

You are here -

Home » Physics » Transportation System » Vertical alignment » Mechanical » Length of Summit Curve with Grade Angles » Driver Sight Height given Angle Grades

Credits

Created by Rahul

Dayanada Sagar college of Engineering (DSCE), banglore

Rahul has created this Calculator and 50+ more calculators!

Verified by Kartikay Pandit

National Institute Of Technology (NIT), Hamirpur

Kartikay Pandit has verified this Calculator and 400+ more calculators!

< Length of Summit Curve with Grade Angles Calculators

Length of Summit Curve Given Angle Grades

LaTeX Go Length of Curve = 2*(Sight Distance-Driver Sight Height/Positive Grade Angle-The Height of The Obstruction/Negative Grade Angle)

Negative Grade Angle Given Sight Distance

LaTeX Go Negative Grade Angle = The Height of The Obstruction/(Sight Distance-Length of Curve/2-Driver Sight Height/Positive Grade Angle)

Height of Obstruction Given Angle Grades

LaTeX Go The Height of The Obstruction = (Sight Distance-Length of Curve/2-Driver Sight Height/Positive Grade Angle)*Negative Grade Angle

Driver Sight Height given Angle Grades

LaTeX Go Driver Sight Height = (Sight Distance-Length of Curve/2-The Height of The Obstruction/Negative Grade Angle)*Positive Grade Angle

Driver Sight Height given Angle Grades Formula

LaTeX Go

Driver Sight Height = (Sight Distance-Length of Curve/2-The Height of The Obstruction/Negative Grade Angle)*Positive Grade Angle
h₁ = (S-L_s/2-h₂/n₂)*n₁

Driver Sight Distance given Angle Grades

The driver sight distance given angle grades calculates the visual distance available for a driver, considering both positive (upward) and negative (downward) road grades. This calculation is crucial in road design to ensure adequate visibility for safe driving while accounting for changes in road elevation.

How to Calculate Driver Sight Height given Angle Grades?

Driver Sight Height given Angle Grades calculator uses Driver Sight Height = (Sight Distance-Length of Curve/2-The Height of The Obstruction/Negative Grade Angle)*Positive Grade Angle to calculate the Driver Sight Height, Driver Sight Height given Angle Grades formula is determined by half the length of the curve added to the sight distance multiplied by the positive grade angle, further added to the height of the obstruction divided by the negative grade angle. Driver Sight Height is denoted by h₁ symbol.

How to calculate Driver Sight Height given Angle Grades using this online calculator? To use this online calculator for Driver Sight Height given Angle Grades, enter Sight Distance (S), Length of Curve (L_s), The Height of The Obstruction (h₂), Negative Grade Angle (n₂) & Positive Grade Angle (n₁) and hit the calculate button. Here is how the Driver Sight Height given Angle Grades calculation can be explained with given input values -> 0.75 = (4.536929-8.953859/2-0.36/(-0.402266))*0.785398163397301.

FAQ

What is Driver Sight Height given Angle Grades?

Driver Sight Height given Angle Grades formula is determined by half the length of the curve added to the sight distance multiplied by the positive grade angle, further added to the height of the obstruction divided by the negative grade angle and is represented as h₁ = (S-L_s/2-h₂/n₂)*n₁ or Driver Sight Height = (Sight Distance-Length of Curve/2-The Height of The Obstruction/Negative Grade Angle)*Positive Grade Angle. Sight Distance is s the minimum distance between two vehicles moving along a curve, when the driver of one vehicle can just see the other vehicle on the road, Length of Curve is the distance along the road where the alignment changes from upward to downward slope, creating a valley-shaped concave, The Height of The Obstruction refers to its vertical dimension, blocking a line of sight or path, often in transportation, construction or safety, A negative grade angle indicates an incline slope & A positive grade angle indicates an upward slope.

How to calculate Driver Sight Height given Angle Grades?

Driver Sight Height given Angle Grades formula is determined by half the length of the curve added to the sight distance multiplied by the positive grade angle, further added to the height of the obstruction divided by the negative grade angle is calculated using Driver Sight Height = (Sight Distance-Length of Curve/2-The Height of The Obstruction/Negative Grade Angle)*Positive Grade Angle. To calculate Driver Sight Height given Angle Grades, you need Sight Distance (S), Length of Curve (L_s), The Height of The Obstruction (h₂), Negative Grade Angle (n₂) & Positive Grade Angle (n₁). With our tool, you need to enter the respective value for Sight Distance, Length of Curve, The Height of The Obstruction, Negative Grade Angle & Positive Grade Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search