Drive Power to be Transmitted given Number of Belts Required Calculator

✖Number of Belts is the number of belts that are required for a given application.ⓘ Number of Belts [N]			+10% -10%
✖Correction Factor for Belt Length is the factor of correction for the belt length.ⓘ Correction Factor for Belt Length [F_cr]			+10% -10%
✖Correction Factor for Arc of Contact is the factor of correction for the arc of contact.ⓘ Correction Factor for Arc of Contact [F_dr]			+10% -10%
✖Power Rating of Single V-Belt is the power rating given to the single V-Belt.ⓘ Power Rating of Single V-Belt [P_r]			+10% -10%
✖Correction Factor for Industrial Service is the correction factor that is used for industrial purpose.ⓘ Correction Factor for Industrial Service [F_ar]			+10% -10%

✖Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.ⓘ Drive Power to be Transmitted given Number of Belts Required [P_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Belt Drives Formulas PDF PDF Image

Drive Power to be Transmitted given Number of Belts Required Solution

STEP 0: Pre-Calculation Summary

Formula Used

Power Transmitted by Belt = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Correction Factor for Industrial Service
P_t = N*(F_cr*F_dr*P_r)/F_ar
This formula uses 6 Variables

Variables Used

Power Transmitted by Belt - (Measured in Watt) - Power Transmitted by Belt is the amount of power that is transmitted from the belt of a belt drive to the pulley.
Number of Belts - Number of Belts is the number of belts that are required for a given application.
Correction Factor for Belt Length - Correction Factor for Belt Length is the factor of correction for the belt length.
Correction Factor for Arc of Contact - Correction Factor for Arc of Contact is the factor of correction for the arc of contact.
Power Rating of Single V-Belt - (Measured in Watt) - Power Rating of Single V-Belt is the power rating given to the single V-Belt.
Correction Factor for Industrial Service - Correction Factor for Industrial Service is the correction factor that is used for industrial purpose.

STEP 1: Convert Input(s) to Base Unit

Number of Belts: 2 --> No Conversion Required
Correction Factor for Belt Length: 1.08 --> No Conversion Required
Correction Factor for Arc of Contact: 0.94 --> No Conversion Required
Power Rating of Single V-Belt: 4.128 Kilowatt --> 4128 Watt (Check conversion here)
Correction Factor for Industrial Service: 1.3 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_t = N*(F_cr*F_dr*P_r)/F_ar --> 2*(1.08*0.94*4128)/1.3

Evaluating ... ...

P_t = 6447.30092307692

STEP 3: Convert Result to Output's Unit

6447.30092307692 Watt -->6.44730092307692 Kilowatt (Check conversion here)

FINAL ANSWER

6.44730092307692 ≈ 6.447301 Kilowatt <-- Power Transmitted by Belt

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Belt Drives » V Belt Drives » Power Transmission » Drive Power to be Transmitted given Number of Belts Required

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Power Transmission Calculators

Belt Velocity given Power Transmitted using V-Belt

LaTeX Go Belt Velocity = Power Transmitted by Belt/(Belt Tension on Tight Side-Belt Tension on Loose Side)

Power Transmitted using V Belt

LaTeX Go Power Transmitted by Belt = (Belt Tension on Tight Side-Belt Tension on Loose Side)*Belt Velocity

Belt Tension in Tight Side of Belt given Power Transmitted using V-Belt

LaTeX Go Belt Tension on Tight Side = Power Transmitted by Belt/Belt Velocity+Belt Tension on Loose Side

Belt Tension in Loose Side of V-Belt given Power Transmitted

LaTeX Go Belt Tension on Loose Side = Belt Tension on Tight Side-Power Transmitted by Belt/Belt Velocity

Drive Power to be Transmitted given Number of Belts Required Formula

LaTeX Go

Define Belt?

A belt is a loop of flexible material used to link two or more rotating shafts mechanically, most often parallel. Belts may be used as a source of motion, to transmit power efficiently or to track relative movement.

How to Calculate Drive Power to be Transmitted given Number of Belts Required?

Drive Power to be Transmitted given Number of Belts Required calculator uses Power Transmitted by Belt = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Correction Factor for Industrial Service to calculate the Power Transmitted by Belt, The Drive Power to be Transmitted given Number of Belts Required formula is defined as a means to assess the power that can be effectively transmitted through a belt drive system, considering the number of belts involved in the design. Power Transmitted by Belt is denoted by P_t symbol.

How to calculate Drive Power to be Transmitted given Number of Belts Required using this online calculator? To use this online calculator for Drive Power to be Transmitted given Number of Belts Required, enter Number of Belts (N), Correction Factor for Belt Length (F_cr), Correction Factor for Arc of Contact (F_dr), Power Rating of Single V-Belt (P_r) & Correction Factor for Industrial Service (F_ar) and hit the calculate button. Here is how the Drive Power to be Transmitted given Number of Belts Required calculation can be explained with given input values -> 0.006447 = 2*(1.08*0.94*4128)/1.3.

FAQ

What is Drive Power to be Transmitted given Number of Belts Required?

The Drive Power to be Transmitted given Number of Belts Required formula is defined as a means to assess the power that can be effectively transmitted through a belt drive system, considering the number of belts involved in the design and is represented as P_t = N*(F_cr*F_dr*P_r)/F_ar or Power Transmitted by Belt = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Correction Factor for Industrial Service. Number of Belts is the number of belts that are required for a given application, Correction Factor for Belt Length is the factor of correction for the belt length, Correction Factor for Arc of Contact is the factor of correction for the arc of contact, Power Rating of Single V-Belt is the power rating given to the single V-Belt & Correction Factor for Industrial Service is the correction factor that is used for industrial purpose.

How to calculate Drive Power to be Transmitted given Number of Belts Required?

The Drive Power to be Transmitted given Number of Belts Required formula is defined as a means to assess the power that can be effectively transmitted through a belt drive system, considering the number of belts involved in the design is calculated using Power Transmitted by Belt = Number of Belts*(Correction Factor for Belt Length*Correction Factor for Arc of Contact*Power Rating of Single V-Belt)/Correction Factor for Industrial Service. To calculate Drive Power to be Transmitted given Number of Belts Required, you need Number of Belts (N), Correction Factor for Belt Length (F_cr), Correction Factor for Arc of Contact (F_dr), Power Rating of Single V-Belt (P_r) & Correction Factor for Industrial Service (F_ar). With our tool, you need to enter the respective value for Number of Belts, Correction Factor for Belt Length, Correction Factor for Arc of Contact, Power Rating of Single V-Belt & Correction Factor for Industrial Service and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Power Transmitted by Belt?

In this formula, Power Transmitted by Belt uses Number of Belts, Correction Factor for Belt Length, Correction Factor for Arc of Contact, Power Rating of Single V-Belt & Correction Factor for Industrial Service. We can use 1 other way(s) to calculate the same, which is/are as follows -

Power Transmitted by Belt = (Belt Tension on Tight Side-Belt Tension on Loose Side)*Belt Velocity

Home

FREE PDFs

🔍 Search