Drawdown given Specific Capacity of Well Calculator

✖Discharge is the rate of flow of a liquid.ⓘ Discharge [Q]			+10% -10%
✖The Specific Capacity refers to the measure used in hydrogeology to evaluate the efficiency of a well, defined as the amount of water a well can produce per unit of drawdown.ⓘ Specific Capacity [S_c]			+10% -10%

✖The Total Drawdown in Well refers to the reduction in water level from the original, static level to the level during pumping.ⓘ Drawdown given Specific Capacity of Well [s_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Characteristic Well Losses Formulas PDF PDF Image

Drawdown given Specific Capacity of Well Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Drawdown = Discharge/Specific Capacity
s_t = Q/S_c
This formula uses 3 Variables

Variables Used

Total Drawdown - (Measured in Meter) - The Total Drawdown in Well refers to the reduction in water level from the original, static level to the level during pumping.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the rate of flow of a liquid.
Specific Capacity - (Measured in Square Meter per Second) - The Specific Capacity refers to the measure used in hydrogeology to evaluate the efficiency of a well, defined as the amount of water a well can produce per unit of drawdown.

STEP 1: Convert Input(s) to Base Unit

Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Specific Capacity: 0.037 Square Meter per Second --> 0.037 Square Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s_t = Q/S_c --> 1.01/0.037

Evaluating ... ...

s_t = 27.2972972972973

STEP 3: Convert Result to Output's Unit

27.2972972972973 Meter --> No Conversion Required

FINAL ANSWER

27.2972972972973 ≈ 27.2973 Meter <-- Total Drawdown

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Characteristic Well Losses » Specific Capacity of Well » Drawdown given Specific Capacity of Well

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specific Capacity of Well Calculators

Specific Capacity given Aquifer Loss

LaTeX Go Specific Capacity = (Discharge/(Head Loss in Well+Aquifer Loss))

Drawdown given Specific Capacity of Well

LaTeX Go Total Drawdown = Discharge/Specific Capacity

Discharge given Specific Capacity

LaTeX Go Discharge = Specific Capacity*Total Drawdown

Specific Capacity given Drawdown

LaTeX Go Specific Capacity = Discharge/Total Drawdown

Drawdown given Specific Capacity of Well Formula

LaTeX Go

Total Drawdown = Discharge/Specific Capacity
s_t = Q/S_c

What is Drawdown?

A drawdown is a peak-to-trough decline during a specific period for an investment, trading account, or fund. A drawdown is usually quoted as the percentage between the peak and the subsequent trough.

How to Calculate Drawdown given Specific Capacity of Well?

Drawdown given Specific Capacity of Well calculator uses Total Drawdown = Discharge/Specific Capacity to calculate the Total Drawdown, The Drawdown given Specific Capacity of Well formula is defined as the measure of the decline in water level in a well due to pumping, which is influenced by the well's specific capacity, a key parameter in evaluating well performance and sustainability in groundwater resources management. Total Drawdown is denoted by s_t symbol.

How to calculate Drawdown given Specific Capacity of Well using this online calculator? To use this online calculator for Drawdown given Specific Capacity of Well, enter Discharge (Q) & Specific Capacity (S_c) and hit the calculate button. Here is how the Drawdown given Specific Capacity of Well calculation can be explained with given input values -> 27.2973 = 1.01/0.037.

FAQ

What is Drawdown given Specific Capacity of Well?

The Drawdown given Specific Capacity of Well formula is defined as the measure of the decline in water level in a well due to pumping, which is influenced by the well's specific capacity, a key parameter in evaluating well performance and sustainability in groundwater resources management and is represented as s_t = Q/S_c or Total Drawdown = Discharge/Specific Capacity. Discharge is the rate of flow of a liquid & The Specific Capacity refers to the measure used in hydrogeology to evaluate the efficiency of a well, defined as the amount of water a well can produce per unit of drawdown.

How to calculate Drawdown given Specific Capacity of Well?

The Drawdown given Specific Capacity of Well formula is defined as the measure of the decline in water level in a well due to pumping, which is influenced by the well's specific capacity, a key parameter in evaluating well performance and sustainability in groundwater resources management is calculated using Total Drawdown = Discharge/Specific Capacity. To calculate Drawdown given Specific Capacity of Well, you need Discharge (Q) & Specific Capacity (S_c). With our tool, you need to enter the respective value for Discharge & Specific Capacity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search