Drawdown at Well given Coefficient of Transmissibility with Base 10 Solution

STEP 0: Pre-Calculation Summary
Formula Used
Total Drawdown in Well = Discharge/((2.72*Coefficient of Transmissibility)/(log((Radius of Influence/Radius of Well),10)))
Stw = Q/((2.72*Tenvi)/(log((Rw/r),10)))
This formula uses 1 Functions, 5 Variables
Functions Used
log - Logarithmic function is an inverse function to exponentiation., log(Base, Number)
Variables Used
Total Drawdown in Well - (Measured in Meter) - Total Drawdown in Well is defined as the reduction in hydraulic head observed at a well in an aquifer, typically due to pumping a well as part of an aquifer test or well test.
Discharge - (Measured in Cubic Meter per Second) - Discharge is the flow rate of water that is extracted from or injected into a well.
Coefficient of Transmissibility - (Measured in Square Meter per Second) - Coefficient of Transmissibility is defined as the rate of flow of water in gallons per day through a vertical strip of the aquifer.
Radius of Influence - (Measured in Meter) - Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table.
Radius of Well - (Measured in Meter) - Radius of Well is defined as the distance from center of well to its outer boundary.
STEP 1: Convert Input(s) to Base Unit
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Coefficient of Transmissibility: 1.5 Square Meter per Second --> 1.5 Square Meter per Second No Conversion Required
Radius of Influence: 8.6 Meter --> 8.6 Meter No Conversion Required
Radius of Well: 7.5 Meter --> 7.5 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Stw = Q/((2.72*Tenvi)/(log((Rw/r),10))) --> 1.01/((2.72*1.5)/(log((8.6/7.5),10)))
Evaluating ... ...
Stw = 4.16488445289163
STEP 3: Convert Result to Output's Unit
4.16488445289163 Meter --> No Conversion Required
FINAL ANSWER
4.16488445289163 4.164884 Meter <-- Total Drawdown in Well
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

Drawdown at well Calculators

Drawdown at Well given Confined Aquifer Discharge
​ LaTeX ​ Go Total Drawdown in Well = Discharge/((2*pi*Coefficient of Permeability in Well Hydraulics*Aquifer Thickness During Pumping)/(log((Radius of Influence/Radius of Well),e)))
Drawdown at Well given Confined Aquifer Discharge with Base 10
​ LaTeX ​ Go Total Drawdown in Well = Discharge/((2.72*Coefficient of Permeability in Well Hydraulics*Aquifer Thickness)/(log((Radius of Influence/Radius of Well),10)))
Drawdown at Well given Coefficient of Transmissibility
​ LaTeX ​ Go Total Drawdown = Discharge/((2*pi*Coefficient of Transmissibility)/(log((Radius of Influence/Radius of Well),e)))
Drawdown at Well given Coefficient of Transmissibility with Base 10
​ LaTeX ​ Go Total Drawdown in Well = Discharge/((2.72*Coefficient of Transmissibility)/(log((Radius of Influence/Radius of Well),10)))

Drawdown at Well given Coefficient of Transmissibility with Base 10 Formula

​LaTeX ​Go
Total Drawdown in Well = Discharge/((2.72*Coefficient of Transmissibility)/(log((Radius of Influence/Radius of Well),10)))
Stw = Q/((2.72*Tenvi)/(log((Rw/r),10)))

What is Drawdown?

A drawdown is a peak-to-trough decline during a specific period for an investment, trading account, or fund. A drawdown is usually quoted as the percentage between the peak and the subsequent trough.

How to Calculate Drawdown at Well given Coefficient of Transmissibility with Base 10?

Drawdown at Well given Coefficient of Transmissibility with Base 10 calculator uses Total Drawdown in Well = Discharge/((2.72*Coefficient of Transmissibility)/(log((Radius of Influence/Radius of Well),10))) to calculate the Total Drawdown in Well, The Drawdown at Well given Coefficient of Transmissibility with Base 10 formula is defined as the value of drawdown at well when we have prior information of coefficient of transmissibility. Total Drawdown in Well is denoted by Stw symbol.

How to calculate Drawdown at Well given Coefficient of Transmissibility with Base 10 using this online calculator? To use this online calculator for Drawdown at Well given Coefficient of Transmissibility with Base 10, enter Discharge (Q), Coefficient of Transmissibility (Tenvi), Radius of Influence (Rw) & Radius of Well (r) and hit the calculate button. Here is how the Drawdown at Well given Coefficient of Transmissibility with Base 10 calculation can be explained with given input values -> 4.164884 = 1.01/((2.72*1.5)/(log((8.6/7.5),10))).

FAQ

What is Drawdown at Well given Coefficient of Transmissibility with Base 10?
The Drawdown at Well given Coefficient of Transmissibility with Base 10 formula is defined as the value of drawdown at well when we have prior information of coefficient of transmissibility and is represented as Stw = Q/((2.72*Tenvi)/(log((Rw/r),10))) or Total Drawdown in Well = Discharge/((2.72*Coefficient of Transmissibility)/(log((Radius of Influence/Radius of Well),10))). Discharge is the flow rate of water that is extracted from or injected into a well, Coefficient of Transmissibility is defined as the rate of flow of water in gallons per day through a vertical strip of the aquifer, Radius of Influence measured from the center of the well to the point where drawdown curve meets the original water table & Radius of Well is defined as the distance from center of well to its outer boundary.
How to calculate Drawdown at Well given Coefficient of Transmissibility with Base 10?
The Drawdown at Well given Coefficient of Transmissibility with Base 10 formula is defined as the value of drawdown at well when we have prior information of coefficient of transmissibility is calculated using Total Drawdown in Well = Discharge/((2.72*Coefficient of Transmissibility)/(log((Radius of Influence/Radius of Well),10))). To calculate Drawdown at Well given Coefficient of Transmissibility with Base 10, you need Discharge (Q), Coefficient of Transmissibility (Tenvi), Radius of Influence (Rw) & Radius of Well (r). With our tool, you need to enter the respective value for Discharge, Coefficient of Transmissibility, Radius of Influence & Radius of Well and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Total Drawdown in Well?
In this formula, Total Drawdown in Well uses Discharge, Coefficient of Transmissibility, Radius of Influence & Radius of Well. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Total Drawdown in Well = Discharge/((2*pi*Coefficient of Permeability in Well Hydraulics*Aquifer Thickness During Pumping)/(log((Radius of Influence/Radius of Well),e)))
  • Total Drawdown in Well = Discharge/((2.72*Coefficient of Permeability in Well Hydraulics*Aquifer Thickness)/(log((Radius of Influence/Radius of Well),10)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!