Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation Calculator

✖Time Interval from the peak in a straight-line method in days.ⓘ Time Interval [N]

+10%

-10%

✖Drainage Area is the total surface area, where the water from rain which is not absorbed into the ground flows over the ground surface, back into streams, to finally reach that point.ⓘ Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation [A_D]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Components of a Hydrograph Formulas PDF PDF Image

Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Drainage Area = (Time Interval/0.83)^(1/0.2)
A_D = (N/0.83)^(1/0.2)
This formula uses 2 Variables

Variables Used

Drainage Area - (Measured in Square Meter) - Drainage Area is the total surface area, where the water from rain which is not absorbed into the ground flows over the ground surface, back into streams, to finally reach that point.
Time Interval - (Measured in Day) - Time Interval from the peak in a straight-line method in days.

STEP 1: Convert Input(s) to Base Unit

Time Interval: 3 Day --> 3 Day No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_D = (N/0.83)^(1/0.2) --> (3/0.83)^(1/0.2)

Evaluating ... ...

A_D = 616.90147937882

STEP 3: Convert Result to Output's Unit

616.90147937882 Square Meter --> No Conversion Required

FINAL ANSWER

616.90147937882 ≈ 616.9015 Square Meter <-- Drainage Area

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Hydrographs » Components of a Hydrograph » Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Components of a Hydrograph Calculators

Discharge at Initial Time in Alternative Form of Exponential Decay

LaTeX Go Discharge at Time t=0 = Discharge at Time t/exp(-Constant 'a' for Discharge in Exponential Decay*Time)

Discharge in Alternative Form of Exponential Decay

LaTeX Go Discharge at Time t = Discharge at Time t=0*exp(-Constant 'a' for Discharge in Exponential Decay*Time)

Discharge at Initial Time

LaTeX Go Discharge at Time t=0 = Discharge at Time t/(Recession Constant^Time)

Discharge concerning Recession Constant

LaTeX Go Discharge at Time t = Discharge at Time t=0*Recession Constant^Time

Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation Formula

LaTeX Go

Drainage Area = (Time Interval/0.83)^(1/0.2)
A_D = (N/0.83)^(1/0.2)

What is Base Flow Separation?

Separation of the Base Flow is achieved by joining with a straight line the beginning of the surface runoff to a point on the recession limb representing the end of the direct runoff.

How to Calculate Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation?

Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation calculator uses Drainage Area = (Time Interval/0.83)^(1/0.2) to calculate the Drainage Area, The Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation formula is defined as the total surface area, upstream of a point on stream, where water from rain is not absorbed into the ground and flows over the ground surface, back into streams, to finally reach that point. Drainage Area is denoted by A_D symbol.

How to calculate Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation using this online calculator? To use this online calculator for Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation, enter Time Interval (N) and hit the calculate button. Here is how the Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation calculation can be explained with given input values -> 616.9015 = (259200/0.83)^(1/0.2).

FAQ

What is Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation?

How to calculate Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation?

The Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation formula is defined as the total surface area, upstream of a point on stream, where water from rain is not absorbed into the ground and flows over the ground surface, back into streams, to finally reach that point is calculated using Drainage Area = (Time Interval/0.83)^(1/0.2). To calculate Drainage Area given Time Interval from Peak in Straight-Line Method of Baseflow Separation, you need Time Interval (N). With our tool, you need to enter the respective value for Time Interval and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search