Dosage Used given Capacity of Chlorinator at Peak Flow Calculator

✖Chlorine Required means pounds of chlorine required per day.ⓘ Chlorine Required [Cl₂]			+10% -10%
✖Peaking Factor is the ratio of the maximum flow to the average daily flow in a water system.ⓘ Peaking Factor [f]			+10% -10%
✖Average Flow often refers to the average velocity of a fluid over a certain period of time or through a specific area.ⓘ Average Flow [Q_a]			+10% -10%

✖Dosage used to obtain coliform reduction refers to the amount of disinfectant added to the wastewater to achieve the desired level of pathogen reduction or disinfection efficacy.ⓘ Dosage Used given Capacity of Chlorinator at Peak Flow [D]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of a Chlorination System for Wastewater Disinfection Formulas PDF PDF Image

Dosage Used given Capacity of Chlorinator at Peak Flow Solution

STEP 0: Pre-Calculation Summary

Formula Used

Dosage = (Chlorine Required/(Peaking Factor*Average Flow*8.34))
D = (Cl₂/(f*Q_a*8.34))
This formula uses 4 Variables

Variables Used

Dosage - (Measured in Kilogram per Cubic Meter) - Dosage used to obtain coliform reduction refers to the amount of disinfectant added to the wastewater to achieve the desired level of pathogen reduction or disinfection efficacy.
Chlorine Required - (Measured in Kilogram per Second) - Chlorine Required means pounds of chlorine required per day.
Peaking Factor - Peaking Factor is the ratio of the maximum flow to the average daily flow in a water system.
Average Flow - (Measured in Cubic Meter per Second) - Average Flow often refers to the average velocity of a fluid over a certain period of time or through a specific area.

STEP 1: Convert Input(s) to Base Unit

Chlorine Required: 10 Kilogram per Day --> 0.000115740740740741 Kilogram per Second (Check conversion here)
Peaking Factor: 0.9999 --> No Conversion Required
Average Flow: 2.5 Cubic Meter per Second --> 2.5 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

D = (Cl₂/(f*Q_a*8.34)) --> (0.000115740740740741/(0.9999*2.5*8.34))

Evaluating ... ...

D = 5.55166983080759E-06

STEP 3: Convert Result to Output's Unit

5.55166983080759E-06 Kilogram per Cubic Meter -->0.00555166983080759 Milligram per Liter (Check conversion here)

FINAL ANSWER

0.00555166983080759 ≈ 0.005552 Milligram per Liter <-- Dosage

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of a Chlorination System for Wastewater Disinfection » Dosage Used given Capacity of Chlorinator at Peak Flow

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Design of a Chlorination System for Wastewater Disinfection Calculators

Residence Time given Number of Coliform Organisms at Any Particular Time

LaTeX Go Residence Time = ((Number of Coliform/Number of Coliform at Initial Time)^(1/3)-1)/(0.23*Chlorine Residual)

Total Chlorine Residual at Any Particular Time

LaTeX Go Chlorine Residual = ((Number of Coliform/Number of Coliform at Initial Time)^(1/3)-1)/(0.23*Residence Time)

Number of Coliform Organisms at any Initial Time

LaTeX Go Number of Coliform = (Number of Coliform at Initial Time/(1+0.23*Chlorine Residual*Residence Time)^(-3))

Number of Coliform Organisms at Any Particular Time

LaTeX Go Number of Coliform at Initial Time = Number of Coliform*(1+0.23*Chlorine Residual*Residence Time)^(-3)

Dosage Used given Capacity of Chlorinator at Peak Flow Formula

LaTeX Go

Dosage = (Chlorine Required/(Peaking Factor*Average Flow*8.34))
D = (Cl₂/(f*Q_a*8.34))

What is coliform ?

Coliform bacteria are defined as Rod shaped Gram-negative non-spore forming and motile or non-motile bacteria which can ferment lactose with the production of acid and gas when incubated at 35–37°C.

How to Calculate Dosage Used given Capacity of Chlorinator at Peak Flow?

Dosage Used given Capacity of Chlorinator at Peak Flow calculator uses Dosage = (Chlorine Required/(Peaking Factor*Average Flow*8.34)) to calculate the Dosage, The Dosage Used given Capacity of Chlorinator at Peak Flow is defined as the amount of disinfectant added to the wastewater to achieve the desired level of pathogen reduction or disinfection efficacy when we have prior information of chlorine required, average flow and peaking factor. Dosage is denoted by D symbol.

How to calculate Dosage Used given Capacity of Chlorinator at Peak Flow using this online calculator? To use this online calculator for Dosage Used given Capacity of Chlorinator at Peak Flow, enter Chlorine Required (Cl₂), Peaking Factor (f) & Average Flow (Q_a) and hit the calculate button. Here is how the Dosage Used given Capacity of Chlorinator at Peak Flow calculation can be explained with given input values -> 2.775557 = (0.000115740740740741/(0.9999*2.5*8.34)).

FAQ

What is Dosage Used given Capacity of Chlorinator at Peak Flow?

The Dosage Used given Capacity of Chlorinator at Peak Flow is defined as the amount of disinfectant added to the wastewater to achieve the desired level of pathogen reduction or disinfection efficacy when we have prior information of chlorine required, average flow and peaking factor and is represented as D = (Cl₂/(f*Q_a*8.34)) or Dosage = (Chlorine Required/(Peaking Factor*Average Flow*8.34)). Chlorine Required means pounds of chlorine required per day, Peaking Factor is the ratio of the maximum flow to the average daily flow in a water system & Average Flow often refers to the average velocity of a fluid over a certain period of time or through a specific area.

How to calculate Dosage Used given Capacity of Chlorinator at Peak Flow?

The Dosage Used given Capacity of Chlorinator at Peak Flow is defined as the amount of disinfectant added to the wastewater to achieve the desired level of pathogen reduction or disinfection efficacy when we have prior information of chlorine required, average flow and peaking factor is calculated using Dosage = (Chlorine Required/(Peaking Factor*Average Flow*8.34)). To calculate Dosage Used given Capacity of Chlorinator at Peak Flow, you need Chlorine Required (Cl₂), Peaking Factor (f) & Average Flow (Q_a). With our tool, you need to enter the respective value for Chlorine Required, Peaking Factor & Average Flow and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Dosage?

In this formula, Dosage uses Chlorine Required, Peaking Factor & Average Flow. We can use 1 other way(s) to calculate the same, which is/are as follows -

Dosage = (Chlorine Required/(8.34*Average Flow))

Home

FREE PDFs

🔍 Search