Distance of Top of Pipe to below Surface of Fill given Unit Pressure Calculator

✖The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface.ⓘ Unit Pressure [P_t]			+10% -10%
✖The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base.ⓘ Slant Height [h_Slant]			+10% -10%
✖Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.ⓘ Superimposed Load [P]			+10% -10%

✖The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill.ⓘ Distance of Top of Pipe to below Surface of Fill given Unit Pressure [H]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sewers their Construction , Maintenance and Required Appurtenances Formulas PDF PDF Image

Distance of Top of Pipe to below Surface of Fill given Unit Pressure Solution

STEP 0: Pre-Calculation Summary

Formula Used

Distance between Pipe and Fill = ((Unit Pressure*2*pi*(Slant Height)^5)/(3*Superimposed Load))^(1/3)
H = ((P_t*2*pi*(h_Slant)^5)/(3*P))^(1/3)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Distance between Pipe and Fill - (Measured in Meter) - The Distance between Pipe and Fill refers to the distance between the upper part of pipe to lower end of fill.
Unit Pressure - (Measured in Pascal) - The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface.
Slant Height - (Measured in Meter) - The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base.
Superimposed Load - (Measured in Newton) - Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.

STEP 1: Convert Input(s) to Base Unit

Unit Pressure: 16 Pascal --> 16 Pascal No Conversion Required
Slant Height: 1.5 Meter --> 1.5 Meter No Conversion Required
Superimposed Load: 10 Newton --> 10 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H = ((P_t*2*pi*(h_Slant)^5)/(3*P))^(1/3) --> ((16*2*pi*(1.5)^5)/(3*10))^(1/3)

Evaluating ... ...

H = 2.94133820387017

STEP 3: Convert Result to Output's Unit

2.94133820387017 Meter --> No Conversion Required

FINAL ANSWER

2.94133820387017 ≈ 2.941338 Meter <-- Distance between Pipe and Fill

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Sewers their Construction , Maintenance and Required Appurtenances » Pressure Due to External Loads » Distance of Top of Pipe to below Surface of Fill given Unit Pressure

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Pressure Due to External Loads Calculators

External Diameter of Pipe given Load Per Unit Length for Pipes

LaTeX Go External Diameter = sqrt(Load per unit Length/(Pipe Coefficient*Specific Weight of Fill))

Pipe Coefficient given Load Per Unit Length for Pipes

LaTeX Go Pipe Coefficient = (Load per unit Length/(Specific Weight of Fill*(External Diameter)^2))

Specific Weight of Fill Material given Load Per Unit Length for Pipes

LaTeX Go Specific Weight of Fill = Load per unit Length/(Pipe Coefficient*(External Diameter)^2)

Load Per Unit Length for Pipes Resting on Undisturbed Ground on Cohesion Less Soil

LaTeX Go Load per unit Length = Pipe Coefficient*Specific Weight of Fill*(External Diameter)^2

Distance of Top of Pipe to below Surface of Fill given Unit Pressure Formula

LaTeX Go

Distance between Pipe and Fill = ((Unit Pressure*2*pi*(Slant Height)^5)/(3*Superimposed Load))^(1/3)
H = ((P_t*2*pi*(h_Slant)^5)/(3*P))^(1/3)

What is load ?

Mechanical load is the physical stress on a mechanical system or component. Loads can be static or dynamic. Some loads are specified as part of the design criteria of a mechanical system. Depending on the usage, some mechanical loads can be measured by an appropriate test method in a laboratory or in the field.

How to Calculate Distance of Top of Pipe to below Surface of Fill given Unit Pressure?

Distance of Top of Pipe to below Surface of Fill given Unit Pressure calculator uses Distance between Pipe and Fill = ((Unit Pressure*2*pi*(Slant Height)^5)/(3*Superimposed Load))^(1/3) to calculate the Distance between Pipe and Fill, The Distance of Top of Pipe to below Surface of Fill given Unit Pressure calculates the distance of top of pipe to below the surface of fill when we have other parameters known. Distance between Pipe and Fill is denoted by H symbol.

How to calculate Distance of Top of Pipe to below Surface of Fill given Unit Pressure using this online calculator? To use this online calculator for Distance of Top of Pipe to below Surface of Fill given Unit Pressure, enter Unit Pressure (P_t), Slant Height (h_Slant) & Superimposed Load (P) and hit the calculate button. Here is how the Distance of Top of Pipe to below Surface of Fill given Unit Pressure calculation can be explained with given input values -> 2.941338 = ((16*2*pi*(1.5)^5)/(3*10))^(1/3).

FAQ

What is Distance of Top of Pipe to below Surface of Fill given Unit Pressure?

The Distance of Top of Pipe to below Surface of Fill given Unit Pressure calculates the distance of top of pipe to below the surface of fill when we have other parameters known and is represented as H = ((P_t*2*pi*(h_Slant)^5)/(3*P))^(1/3) or Distance between Pipe and Fill = ((Unit Pressure*2*pi*(Slant Height)^5)/(3*Superimposed Load))^(1/3). The Unit Pressure refers to a developed at any point in the fill at a depth of H below the surface, The Slant Height refers to the height of a cone from the vertex to the periphery (rather than the center) of the base & Superimposed Load Thermal Expansion Coefficient is a material property that is indicative of the extent to which a material expands upon heating.

How to calculate Distance of Top of Pipe to below Surface of Fill given Unit Pressure?

The Distance of Top of Pipe to below Surface of Fill given Unit Pressure calculates the distance of top of pipe to below the surface of fill when we have other parameters known is calculated using Distance between Pipe and Fill = ((Unit Pressure*2*pi*(Slant Height)^5)/(3*Superimposed Load))^(1/3). To calculate Distance of Top of Pipe to below Surface of Fill given Unit Pressure, you need Unit Pressure (P_t), Slant Height (h_Slant) & Superimposed Load (P). With our tool, you need to enter the respective value for Unit Pressure, Slant Height & Superimposed Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search