Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius Calculator

✖Radius of Inner Fibre is the radius of the inner fiber of a curved structural element.ⓘ Radius of Inner Fibre [R_i]			+10% -10%
✖Radius of Outer Fibre is the radius of the outer fiber of a curved structural element.ⓘ Radius of Outer Fibre [R_o]			+10% -10%

✖Distance from Neutral Axis of Curved Beam is defined as the distance from an axis in the cross-section of a curved beam along which there are no longitudinal stresses or strains.ⓘ Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius [y]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Curved Beams Formulas PDF PDF Image

Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius Solution

STEP 0: Pre-Calculation Summary

Formula Used

Distance from Neutral Axis of Curved Beam = Radius of Inner Fibre*ln(Radius of Outer Fibre/Radius of Inner Fibre)
y = R_i*ln(R_o/R_i)
This formula uses 1 Functions, 3 Variables

Functions Used

ln - The natural logarithm, also known as the logarithm to the base e, is the inverse function of the natural exponential function., ln(Number)

Variables Used

Distance from Neutral Axis of Curved Beam - (Measured in Meter) - Distance from Neutral Axis of Curved Beam is defined as the distance from an axis in the cross-section of a curved beam along which there are no longitudinal stresses or strains.
Radius of Inner Fibre - (Measured in Meter) - Radius of Inner Fibre is the radius of the inner fiber of a curved structural element.
Radius of Outer Fibre - (Measured in Meter) - Radius of Outer Fibre is the radius of the outer fiber of a curved structural element.

STEP 1: Convert Input(s) to Base Unit

Radius of Inner Fibre: 70 Millimeter --> 0.07 Meter (Check conversion here)
Radius of Outer Fibre: 90 Millimeter --> 0.09 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

y = R_i*ln(R_o/R_i) --> 0.07*ln(0.09/0.07)

Evaluating ... ...

y = 0.0175920099796634

STEP 3: Convert Result to Output's Unit

0.0175920099796634 Meter -->17.5920099796634 Millimeter (Check conversion here)

FINAL ANSWER

17.5920099796634 ≈ 17.59201 Millimeter <-- Distance from Neutral Axis of Curved Beam

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design Against Static Load » Design of Curved Beams » Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Design of Curved Beams Calculators

Bending stress in fibre of curved beam given eccentricity

LaTeX Go Bending Stress = ((Bending Moment in Curved Beam*Distance from Neutral Axis of Curved Beam)/(Cross Sectional Area of Curved Beam*(Eccentricity Between Centroidal and Neutral Axis)*(Radius of Neutral Axis-Distance from Neutral Axis of Curved Beam)))

Bending stress in fiber of curved beam

LaTeX Go Bending Stress = (Bending Moment in Curved Beam*Distance from Neutral Axis of Curved Beam)/(Cross Sectional Area of Curved Beam*Eccentricity Between Centroidal and Neutral Axis*(Radius of Neutral Axis-Distance from Neutral Axis of Curved Beam))

Eccentricity between centroidal and neutral axis of curved beam given radius of both axis

LaTeX Go Eccentricity Between Centroidal and Neutral Axis = Radius of Centroidal Axis-Radius of Neutral Axis

Eccentricity between central and neutral axis of curved beam

LaTeX Go Eccentricity Between Centroidal and Neutral Axis = Radius of Centroidal Axis-Radius of Neutral Axis

Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius Formula

LaTeX Go

Distance from Neutral Axis of Curved Beam = Radius of Inner Fibre*ln(Radius of Outer Fibre/Radius of Inner Fibre)
y = R_i*ln(R_o/R_i)

What Does Stress Concentration Factor (Kt) Mean?

A stress concentration factor (Kt) is a dimensionless factor that is used to quantify how concentrated the stress is in a mechanical part. It is defined as the ratio of the highest stress in the part compared to reference stress.
A stress concentration, also known as a stress riser/raiser, is a point in a part where the stress is significantly greater than its surrounding area. Stress concentrations occur as a result of irregularities in the geometry or within the material of a component structure that cause an interruption of the stress flow. These interruptions typically arise from discontinuities such as holes, grooves, notches, and fillets. Stress concentrations may also be caused by accidental damage such as nicks and scratches. A discontinuity’s degree of concentration under typical tensile loads is usually expressed by the non-dimensional stress concentration factor (Kt), which is the ratio of the highest stress to the reference (far-field) stress

How to Calculate Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius?

Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius calculator uses Distance from Neutral Axis of Curved Beam = Radius of Inner Fibre*ln(Radius of Outer Fibre/Radius of Inner Fibre) to calculate the Distance from Neutral Axis of Curved Beam, Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius is the distance between the fiber of the curved beam and the neutral axis at which the resultant stress is zero. Distance from Neutral Axis of Curved Beam is denoted by y symbol.

How to calculate Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius using this online calculator? To use this online calculator for Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius, enter Radius of Inner Fibre (R_i) & Radius of Outer Fibre (R_o) and hit the calculate button. Here is how the Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius calculation can be explained with given input values -> 17592.01 = 0.07*ln(0.09/0.07).

FAQ

What is Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius?

Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius is the distance between the fiber of the curved beam and the neutral axis at which the resultant stress is zero and is represented as y = R_i*ln(R_o/R_i) or Distance from Neutral Axis of Curved Beam = Radius of Inner Fibre*ln(Radius of Outer Fibre/Radius of Inner Fibre). Radius of Inner Fibre is the radius of the inner fiber of a curved structural element & Radius of Outer Fibre is the radius of the outer fiber of a curved structural element.

How to calculate Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius?

Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius is the distance between the fiber of the curved beam and the neutral axis at which the resultant stress is zero is calculated using Distance from Neutral Axis of Curved Beam = Radius of Inner Fibre*ln(Radius of Outer Fibre/Radius of Inner Fibre). To calculate Distance of fibre from neutral axis of rectangular curved beam given inner and outer fiber radius, you need Radius of Inner Fibre (R_i) & Radius of Outer Fibre (R_o). With our tool, you need to enter the respective value for Radius of Inner Fibre & Radius of Outer Fibre and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Distance from Neutral Axis of Curved Beam?

In this formula, Distance from Neutral Axis of Curved Beam uses Radius of Inner Fibre & Radius of Outer Fibre. We can use 1 other way(s) to calculate the same, which is/are as follows -

Distance from Neutral Axis of Curved Beam = 2*(Radius of Centroidal Axis-Radius of Inner Fibre)

Home

FREE PDFs

🔍 Search