HCF calculator

Distance from Antenna 1 to Target in Monopulse Radar Calculator

Engineering Chemistry Financial Health More >>

↳

Electronics Chemical Engineering Civil Electrical More >>

⤿

Radar System Amplifiers Analog Communications Analog Electronics More >>

⤿

Special Purpose Radars Radar and Antenna Specifications Radar Antennas Reception

✖Range refers to the distance between the radar antenna (or the radar system) and a target or object that reflects the radar signal.ⓘ Range [R_o]			+10% -10%
✖Distance between Antennas in Monopulse Radar is the distance between the two antennas mounted on the phase comparison Monopulse Radar.ⓘ Distance between Antennas in Monopulse Radar [s_a]			+10% -10%
✖Angle in Monopulse Radar refers to the direction or angle of arrival (AoA) of a target relative to the radar system.ⓘ Angle in Monopulse Radar [θ]			+10% -10%

✖Distance from Antenna 1 to Target in Monopulse Radar is defined as the distance of antenna from the target in the radar system.ⓘ Distance from Antenna 1 to Target in Monopulse Radar [s₁]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Special Purpose Radars Formulas PDF PDF Image

Distance from Antenna 1 to Target in Monopulse Radar Solution

STEP 0: Pre-Calculation Summary

Formula Used

Distance from Antenna 1 to Target = (Range+Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar)
s₁ = (R_o+s_a)/2*sin(θ)
This formula uses 1 Functions, 4 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Distance from Antenna 1 to Target - (Measured in Meter) - Distance from Antenna 1 to Target in Monopulse Radar is defined as the distance of antenna from the target in the radar system.
Range - (Measured in Meter) - Range refers to the distance between the radar antenna (or the radar system) and a target or object that reflects the radar signal.
Distance between Antennas in Monopulse Radar - (Measured in Meter) - Distance between Antennas in Monopulse Radar is the distance between the two antennas mounted on the phase comparison Monopulse Radar.
Angle in Monopulse Radar - (Measured in Radian) - Angle in Monopulse Radar refers to the direction or angle of arrival (AoA) of a target relative to the radar system.

STEP 1: Convert Input(s) to Base Unit

Range: 40000 Meter --> 40000 Meter No Conversion Required
Distance between Antennas in Monopulse Radar: 0.45 Meter --> 0.45 Meter No Conversion Required
Angle in Monopulse Radar: 60 Degree --> 1.0471975511964 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s₁ = (R_o+s_a)/2*sin(θ) --> (40000+0.45)/2*sin(1.0471975511964)

Evaluating ... ...

s₁ = 17320.7029314026

STEP 3: Convert Result to Output's Unit

17320.7029314026 Meter --> No Conversion Required

FINAL ANSWER

17320.7029314026 ≈ 17320.7 Meter <-- Distance from Antenna 1 to Target

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Electronics » Radar System » Special Purpose Radars » Distance from Antenna 1 to Target in Monopulse Radar

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Special Purpose Radars Calculators

Amplitude of Signal Received from Target at Range

LaTeX Go Amplitude of Signal Received = Echo Signal Voltage/(sin((2*pi*(Carrier Frequency+Doppler Frequency Shift)*Time Period)-((4*pi*Carrier Frequency*Range)/[c])))

Amplitude of Reference Signal

LaTeX Go Amplitude of Reference Signal = CW Oscillator Reference Voltage/(sin(2*pi*Angular Frequency*Time Period))

Reference Voltage of CW Oscillator

LaTeX Go CW Oscillator Reference Voltage = Amplitude of Reference Signal*sin(2*pi*Angular Frequency*Time Period)

Doppler Frequency Shift

LaTeX Go Doppler Frequency Shift = (2*Target Velocity)/Wavelength

Distance from Antenna 1 to Target in Monopulse Radar Formula

LaTeX Go

Distance from Antenna 1 to Target = (Range+Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar)
s₁ = (R_o+s_a)/2*sin(θ)

How far apart should stirrups be?

On general standard spacing of 6″ to 7″ (150 – 180mm) between stirrups provided at middle and 4″ to 5″ (100 – 125mm) at end support of column. Spacing of stirrups near the support end is minimum due the maximum shear forces of the supports.

How to Calculate Distance from Antenna 1 to Target in Monopulse Radar?

Distance from Antenna 1 to Target in Monopulse Radar calculator uses Distance from Antenna 1 to Target = (Range+Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar) to calculate the Distance from Antenna 1 to Target, The Distance from Antenna 1 to Target in Monopulse Radar formula is the distance between one of the 2 antennas in the monopulse radar and target as multiple antennas are employed to provide improved angular resolution and tracking accuracy of a target. Distance from Antenna 1 to Target is denoted by s₁ symbol.

How to calculate Distance from Antenna 1 to Target in Monopulse Radar using this online calculator? To use this online calculator for Distance from Antenna 1 to Target in Monopulse Radar, enter Range (R_o), Distance between Antennas in Monopulse Radar (s_a) & Angle in Monopulse Radar (θ) and hit the calculate button. Here is how the Distance from Antenna 1 to Target in Monopulse Radar calculation can be explained with given input values -> 17320.7 = (40000+0.45)/2*sin(1.0471975511964).

FAQ

What is Distance from Antenna 1 to Target in Monopulse Radar?

The Distance from Antenna 1 to Target in Monopulse Radar formula is the distance between one of the 2 antennas in the monopulse radar and target as multiple antennas are employed to provide improved angular resolution and tracking accuracy of a target and is represented as s₁ = (R_o+s_a)/2*sin(θ) or Distance from Antenna 1 to Target = (Range+Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar). Range refers to the distance between the radar antenna (or the radar system) and a target or object that reflects the radar signal, Distance between Antennas in Monopulse Radar is the distance between the two antennas mounted on the phase comparison Monopulse Radar & Angle in Monopulse Radar refers to the direction or angle of arrival (AoA) of a target relative to the radar system.

How to calculate Distance from Antenna 1 to Target in Monopulse Radar?

The Distance from Antenna 1 to Target in Monopulse Radar formula is the distance between one of the 2 antennas in the monopulse radar and target as multiple antennas are employed to provide improved angular resolution and tracking accuracy of a target is calculated using Distance from Antenna 1 to Target = (Range+Distance between Antennas in Monopulse Radar)/2*sin(Angle in Monopulse Radar). To calculate Distance from Antenna 1 to Target in Monopulse Radar, you need Range (R_o), Distance between Antennas in Monopulse Radar (s_a) & Angle in Monopulse Radar (θ). With our tool, you need to enter the respective value for Range, Distance between Antennas in Monopulse Radar & Angle in Monopulse Radar and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search