Distance between Plates given Mean Velocity of Flow Calculator

✖The Discharge in Laminar Flow refers to the fluid flowing per second through a channel or section of a pipe.ⓘ Discharge in Laminar Flow [Q]			+10% -10%
✖Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.ⓘ Mean Velocity [V_mean]			+10% -10%

✖Width is the measurement or extent of something from side to side.ⓘ Distance between Plates given Mean Velocity of Flow [w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Laminar Flow between Parallel Plates, both Plates at Rest Formulas PDF PDF Image

Distance between Plates given Mean Velocity of Flow Solution

STEP 0: Pre-Calculation Summary

Formula Used

Width = Discharge in Laminar Flow/Mean Velocity
w = Q/V_mean
This formula uses 3 Variables

Variables Used

Width - (Measured in Meter) - Width is the measurement or extent of something from side to side.
Discharge in Laminar Flow - (Measured in Cubic Meter per Second) - The Discharge in Laminar Flow refers to the fluid flowing per second through a channel or section of a pipe.
Mean Velocity - (Measured in Meter per Second) - Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.

STEP 1: Convert Input(s) to Base Unit

Discharge in Laminar Flow: 55 Cubic Meter per Second --> 55 Cubic Meter per Second No Conversion Required
Mean Velocity: 32.4 Meter per Second --> 32.4 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w = Q/V_mean --> 55/32.4

Evaluating ... ...

w = 1.69753086419753

STEP 3: Convert Result to Output's Unit

1.69753086419753 Meter --> No Conversion Required

FINAL ANSWER

1.69753086419753 ≈ 1.697531 Meter <-- Width

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Laminar Flow » Laminar Flow between Parallel Plates, both Plates at Rest » Distance between Plates given Mean Velocity of Flow

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Laminar Flow between Parallel Plates, both Plates at Rest Calculators

Velocity Distribution Profile

LaTeX Go Velocity of Liquid = -(1/(2*Dynamic Viscosity))*Pressure Gradient*(Width*Horizontal Distance-(Horizontal Distance^2))

Distance between Plates using Velocity Distribution Profile

LaTeX Go Width = (((-Velocity of Liquid*2*Dynamic Viscosity)/Pressure Gradient)+(Horizontal Distance^2))/Horizontal Distance

Distance between Plates given Maximum Velocity between Plates

LaTeX Go Width = sqrt((8*Dynamic Viscosity*Maximum Velocity)/(Pressure Gradient))

Maximum Velocity between Plates

LaTeX Go Maximum Velocity = ((Width^2)*Pressure Gradient)/(8*Dynamic Viscosity)

Distance between Plates given Mean Velocity of Flow Formula

LaTeX Go

Width = Discharge in Laminar Flow/Mean Velocity
w = Q/V_mean

What is Rate of Flow?

Rate of flow may refer to: Mass flow rate, the movement of mass per time. Volumetric flow rate, the volume of a fluid which passes through a given surface per unit of time. Heat flow rate, the movement of heat per time.

How to Calculate Distance between Plates given Mean Velocity of Flow?

Distance between Plates given Mean Velocity of Flow calculator uses Width = Discharge in Laminar Flow/Mean Velocity to calculate the Width, The Distance between Plates given Mean Velocity of Flow is defined as the width of section at a particular point in the flowing stream. Width is denoted by w symbol.

How to calculate Distance between Plates given Mean Velocity of Flow using this online calculator? To use this online calculator for Distance between Plates given Mean Velocity of Flow, enter Discharge in Laminar Flow (Q) & Mean Velocity (V_mean) and hit the calculate button. Here is how the Distance between Plates given Mean Velocity of Flow calculation can be explained with given input values -> 0.010802 = 55/32.4.

FAQ

What is Distance between Plates given Mean Velocity of Flow?

The Distance between Plates given Mean Velocity of Flow is defined as the width of section at a particular point in the flowing stream and is represented as w = Q/V_mean or Width = Discharge in Laminar Flow/Mean Velocity. The Discharge in Laminar Flow refers to the fluid flowing per second through a channel or section of a pipe & Mean velocity is defined as the average velocity of a fluid at a point and over an arbitrary time T.

How to calculate Distance between Plates given Mean Velocity of Flow?

The Distance between Plates given Mean Velocity of Flow is defined as the width of section at a particular point in the flowing stream is calculated using Width = Discharge in Laminar Flow/Mean Velocity. To calculate Distance between Plates given Mean Velocity of Flow, you need Discharge in Laminar Flow (Q) & Mean Velocity (V_mean). With our tool, you need to enter the respective value for Discharge in Laminar Flow & Mean Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Width?

In this formula, Width uses Discharge in Laminar Flow & Mean Velocity. We can use 3 other way(s) to calculate the same, which is/are as follows -

Width = (((-Velocity of Liquid*2*Dynamic Viscosity)/Pressure Gradient)+(Horizontal Distance^2))/Horizontal Distance
Width = sqrt((8*Dynamic Viscosity*Maximum Velocity)/(Pressure Gradient))
Width = ((Discharge in Laminar Flow*12*Dynamic Viscosity)/Pressure Gradient)^(1/3)

Home

FREE PDFs

🔍 Search