Displacement of Surface using Depth during Indentation and Depth of Contact Calculator

Chemistry Engineering Financial Health More >>

↳

Nanomaterials and Nanochemistry Analytical chemistry Atmospheric Chemistry Atomic structure More >>

⤿

Mechanical and Nanomechanical Properties Electronic Structure in Clusters and Nanoparticles Magnetism in Nanomaterials Nanocomposites The End of Compromise More >>

✖The Depth during Indentation is the sum of displacement of surface and the depth of contact, which is measured during indentation.ⓘ Depth during Indentation [h]			+10% -10%
✖The Depth of Contact is defined as the depth of penetration when the indenter is in contact with the sample.ⓘ Depth of Contact [h_c]			+10% -10%

✖The Displacement of Surface is simply the displacement of the surface on the perimeter of the contact due to elastic depression.ⓘ Displacement of Surface using Depth during Indentation and Depth of Contact [h_s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemistry Formula PDF PDF Image

Displacement of Surface using Depth during Indentation and Depth of Contact Solution

STEP 0: Pre-Calculation Summary

Formula Used

Displacement of Surface = Depth during Indentation-Depth of Contact
h_s = h-h_c
This formula uses 3 Variables

Variables Used

Displacement of Surface - (Measured in Meter) - The Displacement of Surface is simply the displacement of the surface on the perimeter of the contact due to elastic depression.
Depth during Indentation - (Measured in Meter) - The Depth during Indentation is the sum of displacement of surface and the depth of contact, which is measured during indentation.
Depth of Contact - (Measured in Meter) - The Depth of Contact is defined as the depth of penetration when the indenter is in contact with the sample.

STEP 1: Convert Input(s) to Base Unit

Depth during Indentation: 100 Nanometer --> 1E-07 Meter (Check conversion here)
Depth of Contact: 60 Nanometer --> 6E-08 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_s = h-h_c --> 1E-07-6E-08

Evaluating ... ...

h_s = 4E-08

STEP 3: Convert Result to Output's Unit

4E-08 Meter -->40 Nanometer (Check conversion here)

FINAL ANSWER

40 Nanometer <-- Displacement of Surface

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Nanomaterials and Nanochemistry » Mechanical and Nanomechanical Properties » Displacement of Surface using Depth during Indentation and Depth of Contact

Credits

Created by Abhijit gharphalia

national institute of technology meghalaya (NIT Meghalaya), Shillong

Abhijit gharphalia has created this Calculator and 50+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Mechanical and Nanomechanical Properties Calculators

Depth during Indentation using Displacement of Surface and Depth of Contact

LaTeX Go Depth during Indentation = Displacement of Surface+Depth of Contact

Displacement of Surface using Depth during Indentation and Depth of Contact

LaTeX Go Displacement of Surface = Depth during Indentation-Depth of Contact

Depth of Contact using Depth during Indentation and Displacement of Surface

LaTeX Go Depth of Contact = Depth during Indentation-Displacement of Surface

Depth of Contact using Maximum Depth and Displacement of Surface

LaTeX Go Depth of Contact = Maximum Depth-Displacement of Surface

Displacement of Surface using Depth during Indentation and Depth of Contact Formula

LaTeX Go

Displacement of Surface = Depth during Indentation-Depth of Contact
h_s = h-h_c

What is Vicker's hardness test?

The Vicker's hardness test was developed in 1921 by Robert L. Smith and George E. Sandland at Vickers Ltd as an alternative to the Brinell method to measure the hardness of materials. The Vickers test is often easier to use than other hardness tests since the required calculations are independent of the size of the indenter, and the indenter can be used for all materials irrespective of hardness.

How to Calculate Displacement of Surface using Depth during Indentation and Depth of Contact?

Displacement of Surface using Depth during Indentation and Depth of Contact calculator uses Displacement of Surface = Depth during Indentation-Depth of Contact to calculate the Displacement of Surface, The Displacement of Surface using Depth during Indentation and Depth of Contact formula is defined as the difference between the depth during indentation and the depth of contact. Displacement of Surface is denoted by h_s symbol.

How to calculate Displacement of Surface using Depth during Indentation and Depth of Contact using this online calculator? To use this online calculator for Displacement of Surface using Depth during Indentation and Depth of Contact, enter Depth during Indentation (h) & Depth of Contact (h_c) and hit the calculate button. Here is how the Displacement of Surface using Depth during Indentation and Depth of Contact calculation can be explained with given input values -> 4E+10 = 1E-07-6E-08.

FAQ

What is Displacement of Surface using Depth during Indentation and Depth of Contact?

The Displacement of Surface using Depth during Indentation and Depth of Contact formula is defined as the difference between the depth during indentation and the depth of contact and is represented as h_s = h-h_c or Displacement of Surface = Depth during Indentation-Depth of Contact. The Depth during Indentation is the sum of displacement of surface and the depth of contact, which is measured during indentation & The Depth of Contact is defined as the depth of penetration when the indenter is in contact with the sample.

How to calculate Displacement of Surface using Depth during Indentation and Depth of Contact?

The Displacement of Surface using Depth during Indentation and Depth of Contact formula is defined as the difference between the depth during indentation and the depth of contact is calculated using Displacement of Surface = Depth during Indentation-Depth of Contact. To calculate Displacement of Surface using Depth during Indentation and Depth of Contact, you need Depth during Indentation (h) & Depth of Contact (h_c). With our tool, you need to enter the respective value for Depth during Indentation & Depth of Contact and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Displacement of Surface?

In this formula, Displacement of Surface uses Depth during Indentation & Depth of Contact. We can use 2 other way(s) to calculate the same, which is/are as follows -

Displacement of Surface = Maximum Depth-Depth of Contact
Displacement of Surface = ((pi-2)/pi)*(Maximum Depth-Final Depth)

Home

FREE PDFs

🔍 Search