Discharge through Section Considering Condition of Maximum Discharge Calculator

✖Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Cross-Sectional Area of Channel [A_cs]			+10% -10%
✖Top Width is defined as the width at the top of the section.ⓘ Top Width [T]			+10% -10%

✖Discharge of Channel is the rate of flow of a liquid.ⓘ Discharge through Section Considering Condition of Maximum Discharge [Q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Specific Energy and Critical Depth Formulas PDF PDF Image

Discharge through Section Considering Condition of Maximum Discharge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge of Channel = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)
Q = sqrt((A_cs^3)*[g]/T)
This formula uses 1 Constants, 1 Functions, 3 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Discharge of Channel - (Measured in Cubic Meter per Second) - Discharge of Channel is the rate of flow of a liquid.
Cross-Sectional Area of Channel - (Measured in Square Meter) - Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Top Width - (Measured in Meter) - Top Width is defined as the width at the top of the section.

STEP 1: Convert Input(s) to Base Unit

Cross-Sectional Area of Channel: 3.4 Square Meter --> 3.4 Square Meter No Conversion Required
Top Width: 2.1 Meter --> 2.1 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = sqrt((A_cs^3)*[g]/T) --> sqrt((3.4^3)*[g]/2.1)

Evaluating ... ...

Q = 13.5478090233563

STEP 3: Convert Result to Output's Unit

13.5478090233563 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

13.5478090233563 ≈ 13.54781 Cubic Meter per Second <-- Discharge of Channel

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Flow in Open Channels » Specific Energy and Critical Depth » Discharge through Section Considering Condition of Maximum Discharge

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Specific Energy and Critical Depth Calculators

Mean Velocity of Flow for Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Mean Velocity = sqrt((Total Energy-(Depth of Flow+Height above Datum))*2*[g])

Depth of Flow given Total Energy per Unit Weight of Water in Flow Section

LaTeX Go Depth of Flow = Total Energy-(((Mean Velocity^2)/(2*[g]))+Height above Datum)

Datum Height for Total Energy per unit Weight of Water in Flow Section

LaTeX Go Height above Datum = Total Energy-(((Mean Velocity^2)/(2*[g]))+Depth of Flow)

Total Energy per unit Weight of Water in Flow Section

LaTeX Go Total Energy = ((Mean Velocity^2)/(2*[g]))+Depth of Flow+Height above Datum

Discharge through Section Considering Condition of Maximum Discharge Formula

LaTeX Go

Discharge of Channel = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)
Q = sqrt((A_cs^3)*[g]/T)

What is Rate of Flow?

In physics and engineering, in particular fluid dynamics, the volumetric flow rate is the volume of fluid which passes per unit time; usually it is represented by the symbol Q. The SI unit is cubic metres per second. Another unit used is standard cubic centimetres per minute. In hydrometry, it is known as discharge.

How to Calculate Discharge through Section Considering Condition of Maximum Discharge?

Discharge through Section Considering Condition of Maximum Discharge calculator uses Discharge of Channel = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width) to calculate the Discharge of Channel, The Discharge through Section Considering Condition of Maximum Discharge is defined as the maximum flow rate of fluid passing through a given section, accounting for factors like flow velocity, channel geometry, and fluid properties. Discharge of Channel is denoted by Q symbol.

How to calculate Discharge through Section Considering Condition of Maximum Discharge using this online calculator? To use this online calculator for Discharge through Section Considering Condition of Maximum Discharge, enter Cross-Sectional Area of Channel (A_cs) & Top Width (T) and hit the calculate button. Here is how the Discharge through Section Considering Condition of Maximum Discharge calculation can be explained with given input values -> 125.5416 = sqrt((3.4^3)*[g]/2.1).

FAQ

What is Discharge through Section Considering Condition of Maximum Discharge?

The Discharge through Section Considering Condition of Maximum Discharge is defined as the maximum flow rate of fluid passing through a given section, accounting for factors like flow velocity, channel geometry, and fluid properties and is represented as Q = sqrt((A_cs^3)*[g]/T) or Discharge of Channel = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width). Cross-Sectional Area of Channel is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point & Top Width is defined as the width at the top of the section.

How to calculate Discharge through Section Considering Condition of Maximum Discharge?

The Discharge through Section Considering Condition of Maximum Discharge is defined as the maximum flow rate of fluid passing through a given section, accounting for factors like flow velocity, channel geometry, and fluid properties is calculated using Discharge of Channel = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width). To calculate Discharge through Section Considering Condition of Maximum Discharge, you need Cross-Sectional Area of Channel (A_cs) & Top Width (T). With our tool, you need to enter the respective value for Cross-Sectional Area of Channel & Top Width and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge of Channel?

In this formula, Discharge of Channel uses Cross-Sectional Area of Channel & Top Width. We can use 2 other way(s) to calculate the same, which is/are as follows -

Discharge of Channel = sqrt((Cross-Sectional Area of Channel^3)*[g]/Top Width)
Discharge of Channel = sqrt(2*[g]*Cross-Sectional Area of Channel^2*(Total Energy-Depth of Flow))

Home

FREE PDFs

🔍 Search