Discharge Rate with respect to Settling Velocity Calculator

✖The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs.ⓘ Area [A]			+10% -10%
✖The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.ⓘ Settling Velocity [V_s]			+10% -10%

✖The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.ⓘ Discharge Rate with respect to Settling Velocity [Q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Discharge Rate with respect to Settling Velocity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge = Area*Settling Velocity
Q = A*V_s
This formula uses 3 Variables

Variables Used

Discharge - (Measured in Cubic Meter per Second) - The Discharge refers to the volume of fluid (usually water) that flows through a given cross-sectional area per unit of time.
Area - (Measured in Square Meter) - The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs.
Settling Velocity - (Measured in Meter per Second) - The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

STEP 1: Convert Input(s) to Base Unit

Area: 50 Square Meter --> 50 Square Meter No Conversion Required
Settling Velocity: 1.5 Meter per Second --> 1.5 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = A*V_s --> 50*1.5

Evaluating ... ...

Q = 75

STEP 3: Convert Result to Output's Unit

75 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

75 Cubic Meter per Second <-- Discharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Water 1 Sedimentation » Discharge Rate » Discharge Rate with respect to Settling Velocity

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has verified this Calculator and 500+ more calculators!

< Discharge Rate Calculators

Discharge Rate given Height at Outlet Zone with respect to Discharge

LaTeX Go Discharge = Length*Width*Height of Crack*Falling Speed/Outer Height

Discharge Rate given Detention Time

LaTeX Go Discharge = Length*Width*Height of Crack/Detention Time

Discharge Rate given Vertical Falling Speed in Sedimentation Tank

LaTeX Go Discharge = Settling Velocity*Length*Width

Discharge Rate given Vertical Falling Speed in Sedimentation Tank with respect to Area

LaTeX Go Discharge = Settling Velocity*Area

Discharge Rate with respect to Settling Velocity Formula

LaTeX Go

Discharge = Area*Settling Velocity
Q = A*V_s

What is Settling Velocity ?

Settling Velocity is the constant speed at which a particle falls through a fluid (like water or air) when the forces acting on it are in balance.

How to Calculate Discharge Rate with respect to Settling Velocity?

Discharge Rate with respect to Settling Velocity calculator uses Discharge = Area*Settling Velocity to calculate the Discharge, The Discharge Rate with respect to Settling Velocity formula is defined as the amount of sediment moved by a stream in a given time, measured by dry weight or by volume. Discharge is denoted by Q symbol.

How to calculate Discharge Rate with respect to Settling Velocity using this online calculator? To use this online calculator for Discharge Rate with respect to Settling Velocity, enter Area (A) & Settling Velocity (V_s) and hit the calculate button. Here is how the Discharge Rate with respect to Settling Velocity calculation can be explained with given input values -> 75 = 50*1.5.

FAQ

What is Discharge Rate with respect to Settling Velocity?

The Discharge Rate with respect to Settling Velocity formula is defined as the amount of sediment moved by a stream in a given time, measured by dry weight or by volume and is represented as Q = A*V_s or Discharge = Area*Settling Velocity. The Area of a sedimentation tank refers to the surface area of the tank where sedimentation, or the settling of suspended particles, occurs & The Settling Velocity refers to the rate at which a particle suspended in a fluid (like water or air) falls under the influence of gravity until reaches a constant speed.

How to calculate Discharge Rate with respect to Settling Velocity?

The Discharge Rate with respect to Settling Velocity formula is defined as the amount of sediment moved by a stream in a given time, measured by dry weight or by volume is calculated using Discharge = Area*Settling Velocity. To calculate Discharge Rate with respect to Settling Velocity, you need Area (A) & Settling Velocity (V_s). With our tool, you need to enter the respective value for Area & Settling Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge?

In this formula, Discharge uses Area & Settling Velocity. We can use 3 other way(s) to calculate the same, which is/are as follows -

Discharge = Settling Velocity*Length*Width
Discharge = Settling Velocity*Area
Discharge = Length*Width*Height of Crack/Detention Time

Home

FREE PDFs

🔍 Search