LCM calculator

Discharge in Well under Constant Depression Head Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Environmental Engineering Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Water Resources Ground Water Conveyance of Water Design of a Chlorination System for Wastewater Disinfection Design of a Circular Settling Tank More >>

⤿

Yield of an Open Well Basic Definitions Characteristic Well Losses Confined Aquifers More >>

⤿

Recuperation Test Constant Level Pumping Test

⤿

Constant Depending upon Base Soil Cross Sectional Area of Well Depression Head after Pumping Stopped Depression Head when Pumping Stopped More >>

⤿

Discharge in Well

✖Constant depending on the soil at the base of the well.ⓘ Constant [K]			+10% -10%
✖Constant Depression Head is the constant value of head in the well.ⓘ Constant Depression Head [H']			+10% -10%

✖Discharge in Well is the rate of flow of a liquid in well.ⓘ Discharge in Well under Constant Depression Head [Q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Recuperation Test Formulas PDF PDF Image

Discharge in Well under Constant Depression Head Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge in Well = Constant*Constant Depression Head
Q = K*H'
This formula uses 3 Variables

Variables Used

Discharge in Well - (Measured in Cubic Meter per Second) - Discharge in Well is the rate of flow of a liquid in well.
Constant - Constant depending on the soil at the base of the well.
Constant Depression Head - Constant Depression Head is the constant value of head in the well.

STEP 1: Convert Input(s) to Base Unit

Constant: 5 --> No Conversion Required
Constant Depression Head: 0.038 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = K*H' --> 5*0.038

Evaluating ... ...

Q = 0.19

STEP 3: Convert Result to Output's Unit

0.19 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

0.19 Cubic Meter per Second <-- Discharge in Well

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Recuperation Test » Constant Depending upon Base Soil » Discharge in Well » Discharge in Well under Constant Depression Head

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Discharge in Well Calculators

Discharge in Well given Constant Depression Head and Area of Well

LaTeX Go Discharge in Well = (2.303*Cross-Sectional Area of Well*Constant Depression Head*log((Depression Head/Depression Head in Well 2),10))/Time

Discharge in Well under Constant Depression Head

LaTeX Go Discharge in Well = Constant*Constant Depression Head

Discharge in Well under Constant Depression Head Formula

LaTeX Go

Discharge in Well = Constant*Constant Depression Head
Q = K*H'

What is Discharge?

Discharge in the context of wells, rivers, or any hydraulic system refers to the volume of water flowing out of a particular source over a given period of time. It’s often used to describe the amount of water being produced or released from a well, river, or drainage system. Discharge is a critical factor in evaluating the capacity of a well or river to provide water. For example, higher discharge rates in a well indicate higher water yield, which is important for assessing its productivity and sustainability.

How to Calculate Discharge in Well under Constant Depression Head?

Discharge in Well under Constant Depression Head calculator uses Discharge in Well = Constant*Constant Depression Head to calculate the Discharge in Well, The Discharge in Well under Constant Depression Head formula is defined as the calculation of the value of discharge from a well when we have prior information of other parameters used. Discharge in Well is denoted by Q symbol.

How to calculate Discharge in Well under Constant Depression Head using this online calculator? To use this online calculator for Discharge in Well under Constant Depression Head, enter Constant (K) & Constant Depression Head (H') and hit the calculate button. Here is how the Discharge in Well under Constant Depression Head calculation can be explained with given input values -> 0.19 = 5*0.038.

FAQ

What is Discharge in Well under Constant Depression Head?

The Discharge in Well under Constant Depression Head formula is defined as the calculation of the value of discharge from a well when we have prior information of other parameters used and is represented as Q = K*H' or Discharge in Well = Constant*Constant Depression Head. Constant depending on the soil at the base of the well & Constant Depression Head is the constant value of head in the well.

How to calculate Discharge in Well under Constant Depression Head?

The Discharge in Well under Constant Depression Head formula is defined as the calculation of the value of discharge from a well when we have prior information of other parameters used is calculated using Discharge in Well = Constant*Constant Depression Head. To calculate Discharge in Well under Constant Depression Head, you need Constant (K) & Constant Depression Head (H'). With our tool, you need to enter the respective value for Constant & Constant Depression Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge in Well?

In this formula, Discharge in Well uses Constant & Constant Depression Head. We can use 1 other way(s) to calculate the same, which is/are as follows -

Discharge in Well = (2.303*Cross-Sectional Area of Well*Constant Depression Head*log((Depression Head/Depression Head in Well 2),10))/Time

Home

FREE PDFs

🔍 Search