Discharge from Open Well under Depression Head Calculator

✖The Specific Capacity is referred as amount of water furnished under a standard unit head.ⓘ Specific Capacity [K_s]			+10% -10%
✖The Area of the Well is referred as land area around a well that is influenced by pumping.ⓘ Area of the Well [A]			+10% -10%
✖The Depression Head is defined as height of the bottom of a well above the datum.ⓘ Depression Head [H]			+10% -10%

✖The Yield from an Open Well is referred as flow discharge into well under a depression head H.ⓘ Discharge from Open Well under Depression Head [Q_Y]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Open Wells Formulas PDF PDF Image

Discharge from Open Well under Depression Head Solution

STEP 0: Pre-Calculation Summary

Formula Used

Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head
Q_Y = K_s*A*H
This formula uses 4 Variables

Variables Used

Yield from an Open Well - (Measured in Cubic Meter per Second) - The Yield from an Open Well is referred as flow discharge into well under a depression head H.
Specific Capacity - The Specific Capacity is referred as amount of water furnished under a standard unit head.
Area of the Well - (Measured in Square Meter) - The Area of the Well is referred as land area around a well that is influenced by pumping.
Depression Head - (Measured in Meter) - The Depression Head is defined as height of the bottom of a well above the datum.

STEP 1: Convert Input(s) to Base Unit

Specific Capacity: 0.75 --> No Conversion Required
Area of the Well: 20 Square Meter --> 20 Square Meter No Conversion Required
Depression Head: 7 Meter --> 7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_Y = K_s*A*H --> 0.75*20*7

Evaluating ... ...

Q_Y = 105

STEP 3: Convert Result to Output's Unit

105 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

105 Cubic Meter per Second <-- Yield from an Open Well

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Open Wells » Recuperation Test » Discharge from Open Well under Depression Head

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Recuperation Test Calculators

Proportionality Constant per unit Well Area of Aquifer

LaTeX Go Proportionality Constant = Area of the Well*((1/Time Interval)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time))

Equation for Time Interval

LaTeX Go Time Interval = (Area of the Well/Proportionality Constant)*ln(Drawdown at the Start of Recuperation/Drawdown at a Time)

Area of Well given Time Interval

LaTeX Go Area of the Well = Proportionality Constant*Time Interval/ln(Drawdown at the Start of Recuperation/Drawdown at a Time)

Discharge from Open Well under Depression Head

LaTeX Go Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head

Discharge from Open Well under Depression Head Formula

LaTeX Go

Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head
Q_Y = K_s*A*H

What is Cone of Depression?

A Cone of Depression occurs in an aquifer when groundwater is pumped from a well. In an unconfined aquifer (water table), this is an actual depression of the water levels. In confined aquifers (artesian), the cone of depression is a reduction in the pressure head surrounding the pumped well.

How to Calculate Discharge from Open Well under Depression Head?

Discharge from Open Well under Depression Head calculator uses Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head to calculate the Yield from an Open Well, The Discharge from Open Well under Depression Head formula is defined as the volumetric flow rate of water that is transported through a given cross-sectional area. Yield from an Open Well is denoted by Q_Y symbol.

How to calculate Discharge from Open Well under Depression Head using this online calculator? To use this online calculator for Discharge from Open Well under Depression Head, enter Specific Capacity (K_s), Area of the Well (A) & Depression Head (H) and hit the calculate button. Here is how the Discharge from Open Well under Depression Head calculation can be explained with given input values -> 105 = 0.75*20*7.

FAQ

What is Discharge from Open Well under Depression Head?

The Discharge from Open Well under Depression Head formula is defined as the volumetric flow rate of water that is transported through a given cross-sectional area and is represented as Q_Y = K_s*A*H or Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head. The Specific Capacity is referred as amount of water furnished under a standard unit head, The Area of the Well is referred as land area around a well that is influenced by pumping & The Depression Head is defined as height of the bottom of a well above the datum.

How to calculate Discharge from Open Well under Depression Head?

The Discharge from Open Well under Depression Head formula is defined as the volumetric flow rate of water that is transported through a given cross-sectional area is calculated using Yield from an Open Well = Specific Capacity*Area of the Well*Depression Head. To calculate Discharge from Open Well under Depression Head, you need Specific Capacity (K_s), Area of the Well (A) & Depression Head (H). With our tool, you need to enter the respective value for Specific Capacity, Area of the Well & Depression Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search