Discharge from Open Well given Depression Head Calculator

✖Percolation Intensity Coefficient is the constant of the formation around the well.ⓘ Percolation Intensity Coefficient [C]			+10% -10%
✖Cross-Sectional Area of Well is the the surface area of the interior opening of the well.ⓘ Cross-Sectional Area of Well [A_csw]			+10% -10%
✖The Depression Height is defined as height of the bottom of a well above the datum.ⓘ Depression Height [H]			+10% -10%

✖Discharge in Well is the rate of flow of a liquid in well.ⓘ Discharge from Open Well given Depression Head [Q]

⎘ Copy

👎

Formula

✖

Discharge from Open Well given Depression Head

Formula

Q = (C \cdot A csw \cdot H)

Example

0.91 m³/s = (0.01 m/s \cdot 13 m² \cdot 7 m)

Calculator

LaTeX

Reset

👍

Download Constant Level Pumping Test Formulas PDF PDF Image

Discharge from Open Well given Depression Head Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge in Well = (Percolation Intensity Coefficient*Cross-Sectional Area of Well*Depression Height)
Q = (C*A_csw*H)
This formula uses 4 Variables

Variables Used

Discharge in Well - (Measured in Cubic Meter per Second) - Discharge in Well is the rate of flow of a liquid in well.
Percolation Intensity Coefficient - (Measured in Meter per Second) - Percolation Intensity Coefficient is the constant of the formation around the well.
Cross-Sectional Area of Well - (Measured in Square Meter) - Cross-Sectional Area of Well is the the surface area of the interior opening of the well.
Depression Height - (Measured in Meter) - The Depression Height is defined as height of the bottom of a well above the datum.

STEP 1: Convert Input(s) to Base Unit

Percolation Intensity Coefficient: 0.01 Meter per Second --> 0.01 Meter per Second No Conversion Required
Cross-Sectional Area of Well: 13 Square Meter --> 13 Square Meter No Conversion Required
Depression Height: 7 Meter --> 7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = (C*A_csw*H) --> (0.01*13*7)

Evaluating ... ...

Q = 0.91

STEP 3: Convert Result to Output's Unit

0.91 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

0.91 Cubic Meter per Second <-- Discharge in Well

(Calculation completed in 00.023 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Yield of an Open Well » Constant Level Pumping Test » Discharge from Well » Discharge from Open Well given Depression Head

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Discharge from Well Calculators

Discharge from Well given Specific Capacity

Go Discharge in Well = Specific Capacity in SI unit*Cross-Sectional Area of Well*Constant Depression Head

Discharge from Well given Specific Capacity for Clay Soil

Go Discharge in Well = 0.25*Cross-Sectional Area of Well*Constant Depression Head for Clay Soil

Discharge from Well given Specific Capacity for Coarse Sand

Go Discharge in Well = 1*Cross-Sectional Area of Well*Constant Depression Head for Coarse Sand

Discharge from Well given Specific Capacity for Fine Sand

Go Discharge in Well = 0.5*Cross-Sectional Area of Well*Constant Depression Head for Fine Soil

Discharge from Open Well given Depression Head Formula

Discharge in Well = (Percolation Intensity Coefficient*Cross-Sectional Area of Well*Depression Height)
Q = (C*A_csw*H)

What is Discharge?

Discharge in the context of wells, rivers, or any hydraulic system refers to the volume of water flowing out of a particular source over a given period of time. It’s often used to describe the amount of water being produced or released from a well, river, or drainage system. Discharge is a critical factor in evaluating the capacity of a well or river to provide water. For example, higher discharge rates in a well indicate higher water yield, which is important for assessing its productivity and sustainability.

How to Calculate Discharge from Open Well given Depression Head?

Discharge from Open Well given Depression Head calculator uses Discharge in Well = (Percolation Intensity Coefficient*Cross-Sectional Area of Well*Depression Height) to calculate the Discharge in Well, The Discharge from Open Well given Depression Head formula is defined as the calculation of value of discharge from open well when we have prior information of depression head. Discharge in Well is denoted by Q symbol.

How to calculate Discharge from Open Well given Depression Head using this online calculator? To use this online calculator for Discharge from Open Well given Depression Head, enter Percolation Intensity Coefficient (C), Cross-Sectional Area of Well (A_csw) & Depression Height (H) and hit the calculate button. Here is how the Discharge from Open Well given Depression Head calculation can be explained with given input values -> 0.91 = (0.01*13*7).

FAQ

What is Discharge from Open Well given Depression Head?

The Discharge from Open Well given Depression Head formula is defined as the calculation of value of discharge from open well when we have prior information of depression head and is represented as Q = (C*A_csw*H) or Discharge in Well = (Percolation Intensity Coefficient*Cross-Sectional Area of Well*Depression Height). Percolation Intensity Coefficient is the constant of the formation around the well, Cross-Sectional Area of Well is the the surface area of the interior opening of the well & The Depression Height is defined as height of the bottom of a well above the datum.

How to calculate Discharge from Open Well given Depression Head?

The Discharge from Open Well given Depression Head formula is defined as the calculation of value of discharge from open well when we have prior information of depression head is calculated using Discharge in Well = (Percolation Intensity Coefficient*Cross-Sectional Area of Well*Depression Height). To calculate Discharge from Open Well given Depression Head, you need Percolation Intensity Coefficient (C), Cross-Sectional Area of Well (A_csw) & Depression Height (H). With our tool, you need to enter the respective value for Percolation Intensity Coefficient, Cross-Sectional Area of Well & Depression Height and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge in Well?

In this formula, Discharge in Well uses Percolation Intensity Coefficient, Cross-Sectional Area of Well & Depression Height. We can use 3 other way(s) to calculate the same, which is/are as follows -

Discharge in Well = Specific Capacity in SI unit*Cross-Sectional Area of Well*Constant Depression Head
Discharge in Well = 0.25*Cross-Sectional Area of Well*Constant Depression Head for Clay Soil
Discharge in Well = 0.5*Cross-Sectional Area of Well*Constant Depression Head for Fine Soil

Home

FREE PDFs

🔍 Search