Discharge for Partially Penetrating Well given Correction Factor Calculator

✖Correction Factor refers to the reduced efficiency and altered flow patterns due to the well not extending through the entire aquifer thickness.ⓘ Correction Factor [G]			+10% -10%
✖Discharge for Fully Penetrating Gravity Well refers to the volume of water extracted from an unconfined aquifer where the well reaches the entire thickness of the aquifer.ⓘ Discharge for Fully Penetrating Gravity Well [Q_fe]			+10% -10%

✖Discharge for Partially Penetrating Well refers to the volume of water extracted from an aquifer when the well does not extend through the entire thickness of the aquifer.ⓘ Discharge for Partially Penetrating Well given Correction Factor [Q_v]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Discharge for Partially Penetrating Well given Correction Factor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well
Q_v = G*Q_fe
This formula uses 3 Variables

Variables Used

Discharge for Partially Penetrating Well - (Measured in Cubic Meter per Second) - Discharge for Partially Penetrating Well refers to the volume of water extracted from an aquifer when the well does not extend through the entire thickness of the aquifer.
Correction Factor - Correction Factor refers to the reduced efficiency and altered flow patterns due to the well not extending through the entire aquifer thickness.
Discharge for Fully Penetrating Gravity Well - (Measured in Cubic Meter per Second) - Discharge for Fully Penetrating Gravity Well refers to the volume of water extracted from an unconfined aquifer where the well reaches the entire thickness of the aquifer.

STEP 1: Convert Input(s) to Base Unit

Correction Factor: 0.83 --> No Conversion Required
Discharge for Fully Penetrating Gravity Well: 6.12 Cubic Meter per Second --> 6.12 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_v = G*Q_fe --> 0.83*6.12

Evaluating ... ...

Q_v = 5.0796

STEP 3: Convert Result to Output's Unit

5.0796 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

5.0796 Cubic Meter per Second <-- Discharge for Partially Penetrating Well

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Flow in Wells » Partially Penetrating Artesian Well » Discharge for Partially Penetrating Well given Correction Factor

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Partially Penetrating Artesian Well Calculators

Coefficient of Permeability given Discharge for Partially Penetrating Well

LaTeX Go Coefficient of Permeability = Discharge for Partially Penetrating Well/((2*pi*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water)*Correction Factor)/(log((Radius of Influence/Radius of Well),e)))

Aquifer Thickness given Discharge for Partially Penetrating Well

LaTeX Go Aquifer Thickness = Discharge for Partially Penetrating Well/((2*pi*Coefficient of Permeability*(Initial Piezometric Surface-Depth of Water)*Correction Factor)/(log((Radius of Influence/Radius of Well),e)))

Thickness of Aquifer given Discharge for Partially Penetrating Well

LaTeX Go Initial Piezometric Surface = Depth of Water+(Discharge for Partially Penetrating Well*(log((Radius of Influence/Radius of Well),e)))/(2*pi*Coefficient of Permeability*Aquifer Thickness*Correction Factor)

Discharge for Partially Penetrating Well

LaTeX Go Discharge for Partially Penetrating Well = (2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water)*Correction Factor)/(log((Radius of Influence/Radius of Well),e))

Discharge for Partially Penetrating Well given Correction Factor Formula

LaTeX Go

Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well
Q_v = G*Q_fe

What is Correction Factor?

The correction factor in a partially penetrating well accounts for the reduced efficiency and altered flow patterns due to the well not extending through the entire aquifer thickness. This factor adjusts the discharge calculation to reflect the limited interaction with the aquifer, incorporating vertical flow components and head losses. It helps in accurately estimating the well's discharge by compensating for deviations from the ideal flow assumed in fully penetrating wells.

How to Calculate Discharge for Partially Penetrating Well given Correction Factor?

Discharge for Partially Penetrating Well given Correction Factor calculator uses Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well to calculate the Discharge for Partially Penetrating Well, Discharge for Partially Penetrating Well given Correction Factor formula is defined as a measure of the volumetric flow rate of a partially penetrating well, taking into account the correction factor that adjusts for the well's partial penetration into the aquifer, providing a more accurate representation of the well's discharge capacity in various flow conditions. Discharge for Partially Penetrating Well is denoted by Q_v symbol.

How to calculate Discharge for Partially Penetrating Well given Correction Factor using this online calculator? To use this online calculator for Discharge for Partially Penetrating Well given Correction Factor, enter Correction Factor (G) & Discharge for Fully Penetrating Gravity Well (Q_fe) and hit the calculate button. Here is how the Discharge for Partially Penetrating Well given Correction Factor calculation can be explained with given input values -> 0.000415 = 0.83*6.12.

FAQ

What is Discharge for Partially Penetrating Well given Correction Factor?

Discharge for Partially Penetrating Well given Correction Factor formula is defined as a measure of the volumetric flow rate of a partially penetrating well, taking into account the correction factor that adjusts for the well's partial penetration into the aquifer, providing a more accurate representation of the well's discharge capacity in various flow conditions and is represented as Q_v = G*Q_fe or Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well. Correction Factor refers to the reduced efficiency and altered flow patterns due to the well not extending through the entire aquifer thickness & Discharge for Fully Penetrating Gravity Well refers to the volume of water extracted from an unconfined aquifer where the well reaches the entire thickness of the aquifer.

How to calculate Discharge for Partially Penetrating Well given Correction Factor?

Discharge for Partially Penetrating Well given Correction Factor formula is defined as a measure of the volumetric flow rate of a partially penetrating well, taking into account the correction factor that adjusts for the well's partial penetration into the aquifer, providing a more accurate representation of the well's discharge capacity in various flow conditions is calculated using Discharge for Partially Penetrating Well = Correction Factor*Discharge for Fully Penetrating Gravity Well. To calculate Discharge for Partially Penetrating Well given Correction Factor, you need Correction Factor (G) & Discharge for Fully Penetrating Gravity Well (Q_fe). With our tool, you need to enter the respective value for Correction Factor & Discharge for Fully Penetrating Gravity Well and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge for Partially Penetrating Well?

In this formula, Discharge for Partially Penetrating Well uses Correction Factor & Discharge for Fully Penetrating Gravity Well. We can use 1 other way(s) to calculate the same, which is/are as follows -

Discharge for Partially Penetrating Well = (2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water)*Correction Factor)/(log((Radius of Influence/Radius of Well),e))

Home

FREE PDFs

🔍 Search