Discharge Flowing in Direction Normal to Plate Calculator

✖Discharge by Jet is the rate of flow of a liquid.ⓘ Discharge by Jet [Q]			+10% -10%
✖Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.ⓘ Angle between Jet and Plate [∠D]			+10% -10%

✖discharge in any Direction can be described as the discharge flow normal to the direction.ⓘ Discharge Flowing in Direction Normal to Plate [Q_x,y]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Force Exerted by Fluid Jet on Stationary Flat Plate Formulas PDF PDF Image

Discharge Flowing in Direction Normal to Plate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Discharge in any Direction = (Discharge by Jet/2)*(1+cos(Angle between Jet and Plate))
Q_x,y = (Q/2)*(1+cos(∠D))
This formula uses 1 Functions, 3 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Discharge in any Direction - (Measured in Cubic Meter per Second) - discharge in any Direction can be described as the discharge flow normal to the direction.
Discharge by Jet - (Measured in Cubic Meter per Second) - Discharge by Jet is the rate of flow of a liquid.
Angle between Jet and Plate - (Measured in Radian) - Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.

STEP 1: Convert Input(s) to Base Unit

Discharge by Jet: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required
Angle between Jet and Plate: 11 Degree --> 0.19198621771934 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q_x,y = (Q/2)*(1+cos(∠D)) --> (1.01/2)*(1+cos(0.19198621771934))

Evaluating ... ...

Q_x,y = 1.00072172764107

STEP 3: Convert Result to Output's Unit

1.00072172764107 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

1.00072172764107 ≈ 1.000722 Cubic Meter per Second <-- Discharge in any Direction

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Impact of Free Jets » Force Exerted by Fluid Jet on Stationary Flat Plate » Flat Plate Inclined at an Angle to the Jet » Discharge Flowing in Direction Normal to Plate

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Flat Plate Inclined at an Angle to the Jet Calculators

Velocity of Fluid given Thrust Exerted Normal to Plate

LaTeX Go Fluid Jet Velocity = sqrt((Force Exerted by Jet Normal to Plate*[g])/(Specific Weight of Liquid*Cross Sectional Area of Jet*(sin(Angle between Jet and Plate))))

Force Exerted by Jet in Direction Normal to Plate

LaTeX Go Force Exerted by Jet Normal to Plate = ((Specific Weight of Liquid*Cross Sectional Area of Jet*(Fluid Jet Velocity^2))/([g]))*sin(Angle between Jet and Plate)

Cross Sectional Area of Jet for given Thrust Exerted in Direction of Normal to Plate

LaTeX Go Cross Sectional Area of Jet = (Force Exerted by Jet Normal to Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2*(sin(Angle between Jet and Plate)))

Force Exerted by Jet Parallel to Direction of Jet Normal to Plate

LaTeX Go Force by Jet Normal to Plate in X = ((Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity^2)/[g])*(sin(Angle between Jet and Plate))^2

Discharge Flowing in Direction Normal to Plate Formula

LaTeX Go

Discharge in any Direction = (Discharge by Jet/2)*(1+cos(Angle between Jet and Plate))
Q_x,y = (Q/2)*(1+cos(∠D))

What is discharge flowing by jet?

In physics and engineering, in particular fluid dynamics, the volumetric flow rate (also known as volume flow rate, rate of fluid flow, or volume velocity) is the volume of fluid which passes per unit time.

What is the difference between runoff and discharge?

The data in the reports of the Geological Survey on surface water represent the total fluids measured. Thus, the terms discharge, streamflow, and runoff represent water with the solids dissolved in it and the sediment mixed with it.

How to Calculate Discharge Flowing in Direction Normal to Plate?

Discharge Flowing in Direction Normal to Plate calculator uses Discharge in any Direction = (Discharge by Jet/2)*(1+cos(Angle between Jet and Plate)) to calculate the Discharge in any Direction, Discharge Flowing in Direction Normal to Plate defines the flow rate by jet in the direction of parallel to the plate. Discharge in any Direction is denoted by Q_x,y symbol.

How to calculate Discharge Flowing in Direction Normal to Plate using this online calculator? To use this online calculator for Discharge Flowing in Direction Normal to Plate, enter Discharge by Jet (Q) & Angle between Jet and Plate (∠D) and hit the calculate button. Here is how the Discharge Flowing in Direction Normal to Plate calculation can be explained with given input values -> 1.000722 = (1.01/2)*(1+cos(0.19198621771934)).

FAQ

What is Discharge Flowing in Direction Normal to Plate?

Discharge Flowing in Direction Normal to Plate defines the flow rate by jet in the direction of parallel to the plate and is represented as Q_x,y = (Q/2)*(1+cos(∠D)) or Discharge in any Direction = (Discharge by Jet/2)*(1+cos(Angle between Jet and Plate)). Discharge by Jet is the rate of flow of a liquid & Angle between Jet and Plate is the space between two intersecting lines or surfaces at or close to the point where they meet.

How to calculate Discharge Flowing in Direction Normal to Plate?

Discharge Flowing in Direction Normal to Plate defines the flow rate by jet in the direction of parallel to the plate is calculated using Discharge in any Direction = (Discharge by Jet/2)*(1+cos(Angle between Jet and Plate)). To calculate Discharge Flowing in Direction Normal to Plate, you need Discharge by Jet (Q) & Angle between Jet and Plate (∠D). With our tool, you need to enter the respective value for Discharge by Jet & Angle between Jet and Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Discharge in any Direction?

In this formula, Discharge in any Direction uses Discharge by Jet & Angle between Jet and Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Discharge in any Direction = (Discharge by Jet/2)*(1-cos(Angle between Jet and Plate))

Home

FREE PDFs

🔍 Search