Disc initial radial width given radial strain for rotating thin disc Calculator

✖Final radial width refers to the change or the final measurement of the distance from the center of an object to its outer edge after some transformation or process.ⓘ Final Radial Width [dr_f]			+10% -10%
✖Radial strain is the change in length per unit of original length in the radial direction (the direction from the center to the outer edge of an object).ⓘ Radial Strain [ε_r]			+10% -10%

✖Initial radial width the starting radial distance or width at a particular point or state.ⓘ Disc initial radial width given radial strain for rotating thin disc [d_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Disc initial radial width given radial strain for rotating thin disc Solution

STEP 0: Pre-Calculation Summary

Formula Used

Initial Radial Width = Final Radial Width/(Radial Strain+1)
d_r = dr_f/(ε_r+1)
This formula uses 3 Variables

Variables Used

Initial Radial Width - (Measured in Meter) - Initial radial width the starting radial distance or width at a particular point or state.
Final Radial Width - (Measured in Meter) - Final radial width refers to the change or the final measurement of the distance from the center of an object to its outer edge after some transformation or process.
Radial Strain - Radial strain is the change in length per unit of original length in the radial direction (the direction from the center to the outer edge of an object).

STEP 1: Convert Input(s) to Base Unit

Final Radial Width: 9 Millimeter --> 0.009 Meter (Check conversion here)
Radial Strain: 4 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_r = dr_f/(ε_r+1) --> 0.009/(4+1)

Evaluating ... ...

d_r = 0.0018

STEP 3: Convert Result to Output's Unit

0.0018 Meter -->1.8 Millimeter (Check conversion here)

FINAL ANSWER

1.8 Millimeter <-- Initial Radial Width

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Rotating Disc And Cylinder » Expression for Stresses in Rotating Thin Disc » Mechanical » Radial Width » Disc initial radial width given radial strain for rotating thin disc

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Radial Width Calculators

Increase in initial radial width of disc given stresses

LaTeX Go Increase in Radial Width = ((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus of Elasticity of Disc)*Initial Radial Width

Increase in radial width given radial strain for rotating thin disc

LaTeX Go Increase in Radial Width = Radial Strain*Initial Radial Width

Disc initial radial width given radial strain for rotating thin disc

LaTeX Go Initial Radial Width = Final Radial Width/(Radial Strain+1)

Final radial width given radial strain for rotating thin disc

LaTeX Go Final Radial Width = (Radial Strain+1)*Initial Radial Width

Disc initial radial width given radial strain for rotating thin disc Formula

LaTeX Go

Initial Radial Width = Final Radial Width/(Radial Strain+1)
d_r = dr_f/(ε_r+1)

What is the Allowable Stress?

Allowable stress, also known as allowable strength, is the maximum stress that a material or structure can safely withstand without experiencing failure or permanent deformation. Allowable stress is the stress at which a member is not expected to fail under the given loading conditions.

What is Compression Stress Force?

Compression stress force is the stress that squeezes something. It is the stress component perpendicular to a given surface, such as a fault plane, that results from forces applied perpendicular to the surface or from remote forces transmitted through the surrounding rock.

How to Calculate Disc initial radial width given radial strain for rotating thin disc?

Disc initial radial width given radial strain for rotating thin disc calculator uses Initial Radial Width = Final Radial Width/(Radial Strain+1) to calculate the Initial Radial Width, Disc initial radial width given radial strain for rotating thin disc formula is defined as a relationship that describes how the initial radial width of a rotating disc changes in response to applied radial strain, crucial for analyzing material behavior under rotational stress. Initial Radial Width is denoted by d_r symbol.

How to calculate Disc initial radial width given radial strain for rotating thin disc using this online calculator? To use this online calculator for Disc initial radial width given radial strain for rotating thin disc, enter Final Radial Width (dr_f) & Radial Strain (ε_r) and hit the calculate button. Here is how the Disc initial radial width given radial strain for rotating thin disc calculation can be explained with given input values -> 1800 = 0.009/(4+1).

FAQ

What is Disc initial radial width given radial strain for rotating thin disc?

Disc initial radial width given radial strain for rotating thin disc formula is defined as a relationship that describes how the initial radial width of a rotating disc changes in response to applied radial strain, crucial for analyzing material behavior under rotational stress and is represented as d_r = dr_f/(ε_r+1) or Initial Radial Width = Final Radial Width/(Radial Strain+1). Final radial width refers to the change or the final measurement of the distance from the center of an object to its outer edge after some transformation or process & Radial strain is the change in length per unit of original length in the radial direction (the direction from the center to the outer edge of an object).

How to calculate Disc initial radial width given radial strain for rotating thin disc?

Disc initial radial width given radial strain for rotating thin disc formula is defined as a relationship that describes how the initial radial width of a rotating disc changes in response to applied radial strain, crucial for analyzing material behavior under rotational stress is calculated using Initial Radial Width = Final Radial Width/(Radial Strain+1). To calculate Disc initial radial width given radial strain for rotating thin disc, you need Final Radial Width (dr_f) & Radial Strain (ε_r). With our tool, you need to enter the respective value for Final Radial Width & Radial Strain and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Initial Radial Width?

In this formula, Initial Radial Width uses Final Radial Width & Radial Strain. We can use 2 other way(s) to calculate the same, which is/are as follows -

Initial Radial Width = Increase in Radial Width/Radial Strain
Initial Radial Width = Increase in Radial Width/((Radial Stress-(Poisson's Ratio*Circumferential Stress))/Modulus of Elasticity of Disc)

Home

FREE PDFs

🔍 Search