Direct Stress for given Bulk Modulus and Volumetric Strain Calculator

✖The Bulk Modulus is a measure of the ability of a substance to withstand changes in volume when under compression on all sides.ⓘ Bulk Modulus [K]			+10% -10%
✖The Volumetric Strain is the ratio of change in volume to original volume.ⓘ Volumetric Strain [ε_v]			+10% -10%

✖Direct Stress is the stress developed due to force applied which is parallel or collinear to the axis of the component.ⓘ Direct Stress for given Bulk Modulus and Volumetric Strain [σ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Stress and Strain Formula PDF PDF Image

Direct Stress for given Bulk Modulus and Volumetric Strain Solution

STEP 0: Pre-Calculation Summary

Formula Used

Direct Stress = Bulk Modulus*Volumetric Strain
σ = K*ε_v
This formula uses 3 Variables

Variables Used

Direct Stress - (Measured in Pascal) - Direct Stress is the stress developed due to force applied which is parallel or collinear to the axis of the component.
Bulk Modulus - (Measured in Pascal) - The Bulk Modulus is a measure of the ability of a substance to withstand changes in volume when under compression on all sides.
Volumetric Strain - The Volumetric Strain is the ratio of change in volume to original volume.

STEP 1: Convert Input(s) to Base Unit

Bulk Modulus: 18000 Megapascal --> 18000000000 Pascal (Check conversion here)
Volumetric Strain: 0.0001 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ = K*ε_v --> 18000000000*0.0001

Evaluating ... ...

σ = 1800000

STEP 3: Convert Result to Output's Unit

1800000 Pascal -->1.8 Megapascal (Check conversion here)

FINAL ANSWER

1.8 Megapascal <-- Direct Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Stress and Strain » Elastic Constants » Mechanical » Volumetric Strain » Direct Stress for given Bulk Modulus and Volumetric Strain

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Volumetric Strain Calculators

Volumetric Strain given Change in Length, Breadth and Width

LaTeX Go Volumetric Strain = Change in Length/Length of Section+Change in Breadth/Breadth of Bar+Change in Depth/Depth of Bar

Longitudinal Strain given Volumetric and Lateral Strain

LaTeX Go Longitudinal Strain = Volumetric Strain-(2*Lateral Strain)

Volumetric Strain given Longitudinal and Lateral Strain

LaTeX Go Volumetric Strain = Longitudinal Strain+2*Lateral Strain

Bulk Modulus given Direct Stress

LaTeX Go Bulk Modulus = Direct Stress/Volumetric Strain

< Compression Calculators

28-Day Concrete Compressive Strength

LaTeX Go 28 Day Compressive Strength of Concrete = 7 Day Compressive Strength+(30*sqrt(7 Day Compressive Strength))

Bulk Modulus given Direct Stress

LaTeX Go Bulk Modulus = Direct Stress/Volumetric Strain

28-Day Concrete Compressive Strength given Water Cement Ratio

LaTeX Go 28 Day Compressive Strength of Concrete = (2700*Water Cement Ratio)-760

Water Cement Ratio given 28-Day Concrete Compressive Strength

LaTeX Go Water Cement Ratio = (28 Day Compressive Strength of Concrete+760)/2700

< Volumetric Strain Calculators

Lateral Strain given Volumetric and Longitudinal Strain

LaTeX Go Lateral Strain = -(Longitudinal Strain-Volumetric Strain)/2

Bulk Modulus using Young's Modulus

LaTeX Go Bulk Modulus = Young's Modulus/(3*(1-2*Poisson's Ratio))

Direct Stress for given Bulk Modulus and Volumetric Strain

LaTeX Go Direct Stress = Bulk Modulus*Volumetric Strain

Bulk Modulus given Direct Stress

LaTeX Go Bulk Modulus = Direct Stress/Volumetric Strain

Direct Stress for given Bulk Modulus and Volumetric Strain Formula

LaTeX Go

Direct Stress = Bulk Modulus*Volumetric Strain
σ = K*ε_v

What is Bulk modulus?

The direct stress is proportional to the volumetric strain. The constant of proportionality is the bulk modulus. The ratio of direct stress to volumetric strain is called bulk modulus.

How to Calculate Direct Stress for given Bulk Modulus and Volumetric Strain?

Direct Stress for given Bulk Modulus and Volumetric Strain calculator uses Direct Stress = Bulk Modulus*Volumetric Strain to calculate the Direct Stress, Direct Stress for given Bulk Modulus and Volumetric Strain formula is defined as a relationship that quantifies the stress experienced by a material when subjected to a change in volume. It highlights how materials respond elastically to volumetric changes under applied pressure. Direct Stress is denoted by σ symbol.

How to calculate Direct Stress for given Bulk Modulus and Volumetric Strain using this online calculator? To use this online calculator for Direct Stress for given Bulk Modulus and Volumetric Strain, enter Bulk Modulus (K) & Volumetric Strain (ε_v) and hit the calculate button. Here is how the Direct Stress for given Bulk Modulus and Volumetric Strain calculation can be explained with given input values -> 1.8E-6 = 18000000000*0.0001.

FAQ

What is Direct Stress for given Bulk Modulus and Volumetric Strain?

Direct Stress for given Bulk Modulus and Volumetric Strain formula is defined as a relationship that quantifies the stress experienced by a material when subjected to a change in volume. It highlights how materials respond elastically to volumetric changes under applied pressure and is represented as σ = K*ε_v or Direct Stress = Bulk Modulus*Volumetric Strain. The Bulk Modulus is a measure of the ability of a substance to withstand changes in volume when under compression on all sides & The Volumetric Strain is the ratio of change in volume to original volume.

How to calculate Direct Stress for given Bulk Modulus and Volumetric Strain?

Direct Stress for given Bulk Modulus and Volumetric Strain formula is defined as a relationship that quantifies the stress experienced by a material when subjected to a change in volume. It highlights how materials respond elastically to volumetric changes under applied pressure is calculated using Direct Stress = Bulk Modulus*Volumetric Strain. To calculate Direct Stress for given Bulk Modulus and Volumetric Strain, you need Bulk Modulus (K) & Volumetric Strain (ε_v). With our tool, you need to enter the respective value for Bulk Modulus & Volumetric Strain and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search