Digester Total Suspended Solids given Volume of Aerobic Digester Calculator

✖The Influent Average Flow Rate refers to the average rate at which water or wastewater flows into a treatment system or facility over a specific period of time.ⓘ Influent Average Flow Rate [Q_i]			+10% -10%
✖The Influent Suspended Solids refer to the solid particles present in wastewater or any liquid entering a treatment process.ⓘ Influent Suspended Solids [X_i]			+10% -10%
✖The Volume of Aerobic Digester refers to the capacity or size of the digester vessel or tank where the aerobic digestion process takes place.ⓘ Volume of Aerobic Digester [V_ad]			+10% -10%
✖The Reaction Rate Constant refers to a parameter used to quantify the rate at which a chemical reaction proceeds.ⓘ Reaction Rate Constant [K_d]			+10% -10%
✖The Volatile Fraction refers to the portion of a substance that can vaporize or volatilize under specific conditions, often related to air or water quality assessments.ⓘ Volatile Fraction [P_v]			+10% -10%
✖The Solids Retention Time refers to the average amount of time that solid particles remain in a treatment system, such as a wastewater treatment plant or a bioreactor.ⓘ Solids Retention Time [θ]			+10% -10%

✖The Digester Total Suspended Solids refers to the amount of solid particles suspended in the liquid phase of a digester system.ⓘ Digester Total Suspended Solids given Volume of Aerobic Digester [X]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of an Aerobic Digester Formulas PDF PDF Image

Digester Total Suspended Solids given Volume of Aerobic Digester Solution

STEP 0: Pre-Calculation Summary

Formula Used

Digester Total Suspended Solids = (Influent Average Flow Rate*Influent Suspended Solids)/(Volume of Aerobic Digester*(Reaction Rate Constant*Volatile Fraction+Solids Retention Time))
X = (Q_i*X_i)/(V_ad*(K_d*P_v+θ))
This formula uses 7 Variables

Variables Used

Digester Total Suspended Solids - (Measured in Kilogram per Cubic Meter) - The Digester Total Suspended Solids refers to the amount of solid particles suspended in the liquid phase of a digester system.
Influent Average Flow Rate - (Measured in Cubic Meter per Second) - The Influent Average Flow Rate refers to the average rate at which water or wastewater flows into a treatment system or facility over a specific period of time.
Influent Suspended Solids - (Measured in Kilogram per Cubic Meter) - The Influent Suspended Solids refer to the solid particles present in wastewater or any liquid entering a treatment process.
Volume of Aerobic Digester - (Measured in Cubic Meter) - The Volume of Aerobic Digester refers to the capacity or size of the digester vessel or tank where the aerobic digestion process takes place.
Reaction Rate Constant - (Measured in 1 Per Second) - The Reaction Rate Constant refers to a parameter used to quantify the rate at which a chemical reaction proceeds.
Volatile Fraction - The Volatile Fraction refers to the portion of a substance that can vaporize or volatilize under specific conditions, often related to air or water quality assessments.
Solids Retention Time - (Measured in Second) - The Solids Retention Time refers to the average amount of time that solid particles remain in a treatment system, such as a wastewater treatment plant or a bioreactor.

STEP 1: Convert Input(s) to Base Unit

Influent Average Flow Rate: 5 Cubic Meter per Second --> 5 Cubic Meter per Second No Conversion Required
Influent Suspended Solids: 5000.2 Milligram per Liter --> 5.0002 Kilogram per Cubic Meter (Check conversion here)
Volume of Aerobic Digester: 10 Cubic Meter --> 10 Cubic Meter No Conversion Required
Reaction Rate Constant: 0.05 1 Per Day --> 5.78703703703704E-07 1 Per Second (Check conversion here)
Volatile Fraction: 0.5 --> No Conversion Required
Solids Retention Time: 2 Day --> 172800 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

X = (Q_i*X_i)/(V_ad*(K_d*P_v+θ)) --> (5*5.0002)/(10*(5.78703703703704E-07*0.5+172800))

Evaluating ... ...

X = 1.44681712962721E-05

STEP 3: Convert Result to Output's Unit

1.44681712962721E-05 Kilogram per Cubic Meter -->0.0144681712962721 Milligram per Liter (Check conversion here)

FINAL ANSWER

0.0144681712962721 ≈ 0.014468 Milligram per Liter <-- Digester Total Suspended Solids

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Design of an Aerobic Digester » Digester Total Suspended Solids given Volume of Aerobic Digester

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Design of an Aerobic Digester Calculators

Specific Gravity of Digested Sludge given Volume of Digested Sludge

LaTeX Go Specific Gravity of Sludge = (Weight of Sludge)/(Water Density*Sludge Volume*Percent Solids)

Density of Water given Volume of Digested Sludge

LaTeX Go Water Density = (Weight of Sludge)/(Sludge Volume*Specific Gravity of Sludge*Percent Solids)

Volume of Digested Sludge

LaTeX Go Sludge Volume = (Weight of Sludge)/(Water Density*Specific Gravity of Sludge*Percent Solids)

Weight of Sludge given Volume of Digested Sludge

LaTeX Go Weight of Sludge = (Water Density*Sludge Volume*Specific Gravity of Sludge*Percent Solids)

Digester Total Suspended Solids given Volume of Aerobic Digester Formula

LaTeX Go

What is Total Suspended Solids?

Total suspended solids is the dry-weight of suspended particles, that are not dissolved, in a sample of water that can be trapped by a filter that is analysed using a filtration apparatus.

How to Calculate Digester Total Suspended Solids given Volume of Aerobic Digester?

Digester Total Suspended Solids given Volume of Aerobic Digester calculator uses Digester Total Suspended Solids = (Influent Average Flow Rate*Influent Suspended Solids)/(Volume of Aerobic Digester*(Reaction Rate Constant*Volatile Fraction+Solids Retention Time)) to calculate the Digester Total Suspended Solids, The Digester Total Suspended Solids given Volume of Aerobic Digester formula is defined as the amount of solid particles suspended in the liquid phase of a digester system, when we have prior information of other parameters used. Digester Total Suspended Solids is denoted by X symbol.

How to calculate Digester Total Suspended Solids given Volume of Aerobic Digester using this online calculator? To use this online calculator for Digester Total Suspended Solids given Volume of Aerobic Digester, enter Influent Average Flow Rate (Q_i), Influent Suspended Solids (X_i), Volume of Aerobic Digester (V_ad), Reaction Rate Constant (K_d), Volatile Fraction (P_v) & Solids Retention Time (θ) and hit the calculate button. Here is how the Digester Total Suspended Solids given Volume of Aerobic Digester calculation can be explained with given input values -> 14.46817 = (5*5.0002)/(10*(5.78703703703704E-07*0.5+172800)).

FAQ

What is Digester Total Suspended Solids given Volume of Aerobic Digester?

The Digester Total Suspended Solids given Volume of Aerobic Digester formula is defined as the amount of solid particles suspended in the liquid phase of a digester system, when we have prior information of other parameters used and is represented as X = (Q_i*X_i)/(V_ad*(K_d*P_v+θ)) or Digester Total Suspended Solids = (Influent Average Flow Rate*Influent Suspended Solids)/(Volume of Aerobic Digester*(Reaction Rate Constant*Volatile Fraction+Solids Retention Time)). The Influent Average Flow Rate refers to the average rate at which water or wastewater flows into a treatment system or facility over a specific period of time, The Influent Suspended Solids refer to the solid particles present in wastewater or any liquid entering a treatment process, The Volume of Aerobic Digester refers to the capacity or size of the digester vessel or tank where the aerobic digestion process takes place, The Reaction Rate Constant refers to a parameter used to quantify the rate at which a chemical reaction proceeds, The Volatile Fraction refers to the portion of a substance that can vaporize or volatilize under specific conditions, often related to air or water quality assessments & The Solids Retention Time refers to the average amount of time that solid particles remain in a treatment system, such as a wastewater treatment plant or a bioreactor.

How to calculate Digester Total Suspended Solids given Volume of Aerobic Digester?

The Digester Total Suspended Solids given Volume of Aerobic Digester formula is defined as the amount of solid particles suspended in the liquid phase of a digester system, when we have prior information of other parameters used is calculated using Digester Total Suspended Solids = (Influent Average Flow Rate*Influent Suspended Solids)/(Volume of Aerobic Digester*(Reaction Rate Constant*Volatile Fraction+Solids Retention Time)). To calculate Digester Total Suspended Solids given Volume of Aerobic Digester, you need Influent Average Flow Rate (Q_i), Influent Suspended Solids (X_i), Volume of Aerobic Digester (V_ad), Reaction Rate Constant (K_d), Volatile Fraction (P_v) & Solids Retention Time (θ). With our tool, you need to enter the respective value for Influent Average Flow Rate, Influent Suspended Solids, Volume of Aerobic Digester, Reaction Rate Constant, Volatile Fraction & Solids Retention Time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search