Differential Pressure Head of Elbow Meter Calculator

✖The Discharge of Pipe through Elbow meter refers to the fluid flowing per second through a channel or section of a pipe.ⓘ Discharge of Pipe Through Elbow meter [q]			+10% -10%
✖The Coefficient of Discharge is ratio of actual discharge to theoretical discharge.ⓘ Coefficient of Discharge [C_d]			+10% -10%
✖The Cross sectional Area of Pipe refers to the area of the pipe through which the given liquid is flowing.ⓘ Cross Sectional Area of Pipe [A]			+10% -10%

✖The Difference in Pressure Head refers to the height of a liquid column that corresponds to a specific pressure exerted by the liquid at the base of its container.ⓘ Differential Pressure Head of Elbow Meter [H_Pressurehead]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Equations of Motion and Energy Equation Formulas PDF PDF Image

Differential Pressure Head of Elbow Meter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Difference in Pressure Head = ((Discharge of Pipe Through Elbow meter/(Coefficient of Discharge*Cross Sectional Area of Pipe))^2)/(2*9.81)
H_Pressurehead = ((q/(C_d*A))^2)/(2*9.81)
This formula uses 4 Variables

Variables Used

Difference in Pressure Head - (Measured in Meter) - The Difference in Pressure Head refers to the height of a liquid column that corresponds to a specific pressure exerted by the liquid at the base of its container.
Discharge of Pipe Through Elbow meter - (Measured in Cubic Meter per Second) - The Discharge of Pipe through Elbow meter refers to the fluid flowing per second through a channel or section of a pipe.
Coefficient of Discharge - The Coefficient of Discharge is ratio of actual discharge to theoretical discharge.
Cross Sectional Area of Pipe - (Measured in Square Meter) - The Cross sectional Area of Pipe refers to the area of the pipe through which the given liquid is flowing.

STEP 1: Convert Input(s) to Base Unit

Discharge of Pipe Through Elbow meter: 5 Cubic Meter per Second --> 5 Cubic Meter per Second No Conversion Required
Coefficient of Discharge: 0.66 --> No Conversion Required
Cross Sectional Area of Pipe: 2 Square Meter --> 2 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

H_Pressurehead = ((q/(C_d*A))^2)/(2*9.81) --> ((5/(0.66*2))^2)/(2*9.81)

Evaluating ... ...

H_Pressurehead = 0.73129590783191

STEP 3: Convert Result to Output's Unit

0.73129590783191 Meter --> No Conversion Required

FINAL ANSWER

0.73129590783191 ≈ 0.731296 Meter <-- Difference in Pressure Head

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Equations of Motion and Energy Equation » Elbow Meter » Differential Pressure Head of Elbow Meter

Credits

Created by Rithik Agrawal

National Institute of Technology Karnataka (NITK), Surathkal

Rithik Agrawal has created this Calculator and 1300+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< Elbow Meter Calculators

Coefficient of Discharge of Elbow Meter given Discharge

LaTeX Go Coefficient of Discharge = Discharge of Pipe Through Elbow meter/(Cross Sectional Area of Pipe*(sqrt(2*Acceleration due to Gravity*Elbowmeter Height)))

Cross-Sectional Area of Elbow Meter given Discharge

LaTeX Go Cross Sectional Area of Pipe = Discharge of Pipe Through Elbow meter/(Coefficient of Discharge*(sqrt(2*Acceleration due to Gravity*Elbowmeter Height)))

Discharge through Pipe in Elbowmeter

LaTeX Go Discharge of Pipe Through Elbow meter = Coefficient of Discharge*Cross Sectional Area of Pipe*(sqrt(2*Acceleration due to Gravity*Elbowmeter Height))

Differential Pressure Head of Elbow Meter

LaTeX Go Difference in Pressure Head = ((Discharge of Pipe Through Elbow meter/(Coefficient of Discharge*Cross Sectional Area of Pipe))^2)/(2*9.81)

Differential Pressure Head of Elbow Meter Formula

LaTeX Go

Difference in Pressure Head = ((Discharge of Pipe Through Elbow meter/(Coefficient of Discharge*Cross Sectional Area of Pipe))^2)/(2*9.81)
H_Pressurehead = ((q/(C_d*A))^2)/(2*9.81)

What is Elbow Meter?

A Pipe elbow used as a liquid flow meter is known as an Elbow meter. Pipe elbow used as a liquids flowmeter; flow rate is measured by determining the differential pressure developed between the inner and outer radii of the bend by means of two pressure taps located midway on the bend.

How to Calculate Differential Pressure Head of Elbow Meter?

Differential Pressure Head of Elbow Meter calculator uses Difference in Pressure Head = ((Discharge of Pipe Through Elbow meter/(Coefficient of Discharge*Cross Sectional Area of Pipe))^2)/(2*9.81) to calculate the Difference in Pressure Head, The Differential Pressure Head of Elbow Meter when Discharge is Given is defined as total head loss through the flow. Difference in Pressure Head is denoted by H_Pressurehead symbol.

How to calculate Differential Pressure Head of Elbow Meter using this online calculator? To use this online calculator for Differential Pressure Head of Elbow Meter, enter Discharge of Pipe Through Elbow meter (q), Coefficient of Discharge (C_d) & Cross Sectional Area of Pipe (A) and hit the calculate button. Here is how the Differential Pressure Head of Elbow Meter calculation can be explained with given input values -> 0.731296 = ((5/(0.66*2))^2)/(2*9.81).

FAQ

What is Differential Pressure Head of Elbow Meter?

The Differential Pressure Head of Elbow Meter when Discharge is Given is defined as total head loss through the flow and is represented as H_Pressurehead = ((q/(C_d*A))^2)/(2*9.81) or Difference in Pressure Head = ((Discharge of Pipe Through Elbow meter/(Coefficient of Discharge*Cross Sectional Area of Pipe))^2)/(2*9.81). The Discharge of Pipe through Elbow meter refers to the fluid flowing per second through a channel or section of a pipe, The Coefficient of Discharge is ratio of actual discharge to theoretical discharge & The Cross sectional Area of Pipe refers to the area of the pipe through which the given liquid is flowing.

How to calculate Differential Pressure Head of Elbow Meter?

The Differential Pressure Head of Elbow Meter when Discharge is Given is defined as total head loss through the flow is calculated using Difference in Pressure Head = ((Discharge of Pipe Through Elbow meter/(Coefficient of Discharge*Cross Sectional Area of Pipe))^2)/(2*9.81). To calculate Differential Pressure Head of Elbow Meter, you need Discharge of Pipe Through Elbow meter (q), Coefficient of Discharge (C_d) & Cross Sectional Area of Pipe (A). With our tool, you need to enter the respective value for Discharge of Pipe Through Elbow meter, Coefficient of Discharge & Cross Sectional Area of Pipe and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search